T3 Scoop install and light mod - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

overhaulengines · 10-04-2010, 10:18 AM

i will keep ya'll posted, working this morning on a way to mount DRL's.

Lupe

CamaroFTW · 10-04-2010, 10:35 AM

Quote:

Originally Posted by overhaulengines

i will keep ya'll posted, working this morning on a way to mount DRL's.

Lupe

YES! Me too!

camaro52010 · 10-04-2010, 11:31 AM

maybe someone asked but where is that air going, right onto the tires?

overhaulengines · 10-04-2010, 12:49 PM

Quote:

Originally Posted by ACS Composite

Actually the air entering the driver's side port uses the wheel liner to direct fresh air to your OEM CAI or most aftermarket air filters.

We have been testing different products to enhance the performance aspect of the ports....can't say much more but next spring will be pretty exciting for ACS.

Thank you for the input overhaulengines, BTW going forward we will include two templates per kit.... that is a great idea. As for the paper i first tried a very thick paper and found it hard to conform to the bumper.... I will re evaluate and see.

Great hearing suggestions to improve our products

Quote:

Originally Posted by camaro52010

maybe someone asked but where is that air going, right onto the tires?

hello, please see the above explaination.

Lupe

FINALLYSATISFIED · 10-04-2010, 03:45 PM

Gary does do some amazing work, I just got my V8 Splitter from him painted/installed and I've gotten crazy compliments already...

overhaulengines · 10-05-2010, 10:06 AM

Quote:

Originally Posted by CaniacFan

Holy cow, those are some skills!! Great pics, super end results!!

thank you

Quote:

Originally Posted by Jus1dab

Nice custom work.

thank you, i get an adreneline rush every time i grind, cut or hack.

i think its becoming a illness

Quote:

Originally Posted by RedlineSS

Nice!

thx.

Quote:

Originally Posted by MY1STCAMAR0

Gary does do some amazing work, I just got my V8 Splitter from him painted/installed and I've gotten crazy compliments already...

Gary provides a great service. he just notified my that my razzi ground effects are on the way. yeah baby. more hacking

. man, i'm a sick puppy

lupe

jlugo · 10-05-2010, 11:24 AM

That looks awesome!

Fidgit · 10-05-2010, 01:44 PM

OP, Are you just leaving the fog lights out? or do you plan to mount them somewhere else?

Or even directed to the designer, do you have a kit or supplimental that has a mounting idea for the fog lights?

overhaulengines · 10-05-2010, 03:00 PM

Quote:

Originally Posted by Fidgit

OP, Are you just leaving the fog lights out? or do you plan to mount them somewhere else?

Or even directed to the designer, do you have a kit or supplimental that has a mounting idea for the fog lights?

i am working on few different things right now, since i have dual halos red/white, i am mounting white LED strips on the scoops like the manufacture is doing and then we made some custom brackets to hold red LED's at an angle, this way, the scoop will light up red but you cannot see the LED. i think it looks pretty cool. i will post pics real soon.

Lupe

ACS Composite · 10-05-2010, 10:40 PM

Can't wait to see what you come up, we currently have a prototype bracket with the original DRL light mounted on the T3 and T2 ports, it does look pretty cool and will make the kit a true bolt on.

Once validated i'll be able to post our parts.

ACS

Quote:

Originally Posted by overhaulengines

i am working on few different things right now, since i have dual halos red/white, i am mounting white LED strips on the scoops like the manufacture is doing and then we made some custom brackets to hold red LED's at an angle, this way, the scoop will light up red but you cannot see the LED. i think it looks pretty cool. i will post pics real soon.

Lupe

CamaroFTW · 10-05-2010, 10:56 PM

Quote:

Originally Posted by ACS Composite

Can't wait to see what you come up, we currently have a prototype bracket with the original DRL light mounted on the T3 and T2 ports, it does look pretty cool and will make the kit a true bolt on.

Once validated i'll be able to post our parts.

ACS

GREAT!! I was designing my own but would much rather have a factory solution! How soon????

GJG · 10-05-2010, 11:01 PM

Quote:

Originally Posted by ACS Composite

Can't wait to see what you come up, we currently have a prototype bracket with the original DRL light mounted on the T3 and T2 ports, it does look pretty cool and will make the kit a true bolt on.

Once validated i'll be able to post our parts.

ACS

will this will work with existing T3's we have already purchased?

thanks!

ACS Composite · 10-05-2010, 11:11 PM

Yes it will work with T2 ports, these will be offered initially to customers who have already purchased the ports.

ACS Composite · 10-05-2010, 11:13 PM

Quote:

Originally Posted by CamaroFTW

GREAT!! I was designing my own but would much rather have a factory solution! How soon????

With Sema around the corner new product releases are tough... but will post images to get your feedback.

10-04-2010, 11:31 AM	#73
camaro52010 Camaro4ever Drives: 2010 Camaro SS/RS, 1978 Z28 Camaro Join Date: Jul 2010 Location: Rochester, NY Posts: 445 View My Garage	maybe someone asked but where is that air going, right onto the tires? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Raptor Dual Stage Shift Light.	ThunderSS	Camaro DIY & HOW-TO instructions & discussions	47	05-27-2019 08:48 AM
how to install MSD SHIFT LIGHT PART NO.8963	moiy1983	Camaro DIY & HOW-TO instructions & discussions	13	12-30-2014 02:41 PM
DIY - Install BFxenon HID Fog Light kit - RS and non-RS package	BFxenon.com	Camaro DIY & HOW-TO instructions & discussions	46	04-25-2011 11:04 AM
Ambient Light Dash install, newer 2ss no factory plugs - Lessons learned	skuttduck	Camaro DIY & HOW-TO instructions & discussions	4	06-01-2010 07:31 AM
Opinion/preferred wheel well light install...	TRSS2	Cosmetics and Lighting Modification Discussions	0	03-13-2010 05:05 PM

10-04-2010, 10:18 AM	#71
overhaulengines Drives: Red 2SS/RS M6 Join Date: Apr 2010 Location: San Antonio, Texas Posts: 6,219	i will keep ya'll posted, working this morning on a way to mount DRL's. Lupe

10-04-2010, 03:45 PM	#75
FINALLYSATISFIED Est.1775 Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009 Location: SoCal Posts: 5,502	Gary does do some amazing work, I just got my V8 Splitter from him painted/installed and I've gotten crazy compliments already...

10-05-2010, 11:24 AM	#77
jlugo Account Suspended Drives: 2014 1LE 'Summit White' Join Date: Jul 2009 Location: Temple, Texas Posts: 2,351 View My Garage	That looks awesome!

10-05-2010, 01:44 PM	#78
Fidgit Drives: 2010 2SS/RS, Black-on-Black Join Date: Sep 2010 Location: Putnam County, NY Posts: 173 View My Garage	OP, Are you just leaving the fog lights out? or do you plan to mount them somewhere else? Or even directed to the designer, do you have a kit or supplimental that has a mounting idea for the fog lights?

10-05-2010, 11:11 PM	#83
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	Yes it will work with T2 ports, these will be offered initially to customers who have already purchased the ports.