My exhaust project. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlazeLuca · 07-13-2015, 10:36 PM

Hello, i am kinda new to the forums and i needed some help. Im about to purchase the dynomax racing bullet mufflers 24215 with dynomax tips 36474 and the magnaflow resonated x pipe. I had a few questions one of them being does anyone have a setup similar to this or if anyone has heard something similar to this in person and if they can they tell me what to expect? All i have heard is videos. Another question being will it all fit, with the stock 2.25 pipe or will i have to go to a bigger size? The last question is will this be too loud? I have heard that the racing bullets are extremely loud, but the have the tone that i like and i want it a little louder than stock but not too obnoxious, i figured the x pipe would help with that a little. Any feedback would be greatly appreciated.

rtcat600man · 07-14-2015, 04:50 AM

Welcome to the forum.

Have you checked out this thread?

http://www.camaro5.com/forums/showthread.php?t=33104

I don't know anything about the mufflers you are talking about, but am interested in hearing your set-up when completed.

The Resonated X pipe will help keep things somewhat in check.

Another popluar option is add the X pipe and do a muffler delete all together. As the X pipe is basically a muffler too.

Yes the stock 2.25 pipe will work fine. See my photo for referance.

Linker239 · 07-14-2015, 08:54 AM

I figure that they will be similar to my cherry bombs. Yes they will be loud, not as bad as a muffler delete, a little more refined. But the x-pipe will make it quieter. My cherry bombs were unbearablely loud untill I put the x pipe on.

KMPrenger · 07-14-2015, 12:36 PM

I think you are going to have yourself a great setup there.

Its something I wanted to try on my car, but never did.

BlazeLuca · 07-14-2015, 02:52 PM

Thanks for the replies guys, I'm worried that it will either be too loud. Or that it might not fit my stock pipes correctly. Also how much do you think a muffler shop will charge to weld these in?

BlazeLuca · 07-15-2015, 09:48 AM

New update, called local muffler shop for a quote on installation and they told me about $275. Does that sound right? Seems a little expensive to me. All they would do is cut out the old and weld the new.

BlazeLuca · 07-15-2015, 11:16 AM

Okay called a new shop and they said it would be about an hour and a half of work so they would charge $140.

Linker239 · 07-15-2015, 02:25 PM

Yea 275 was a little pricey.

BlazeLuca · 07-21-2015, 10:49 AM

All of my stuff came in today, me and a buddy are gonna install it today or tomorrow. Ready to hear it.

07-13-2015, 10:36 PM	#1
BlazeLuca Drives: 2010 2LT/RS Join Date: May 2015 Location: Oklahoma Posts: 19	My exhaust project. Hello, i am kinda new to the forums and i needed some help. Im about to purchase the dynomax racing bullet mufflers 24215 with dynomax tips 36474 and the magnaflow resonated x pipe. I had a few questions one of them being does anyone have a setup similar to this or if anyone has heard something similar to this in person and if they can they tell me what to expect? All i have heard is videos. Another question being will it all fit, with the stock 2.25 pipe or will i have to go to a bigger size? The last question is will this be too loud? I have heard that the racing bullets are extremely loud, but the have the tone that i like and i want it a little louder than stock but not too obnoxious, i figured the x pipe would help with that a little. Any feedback would be greatly appreciated.

07-14-2015, 04:50 AM	#2
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	Welcome to the forum. Have you checked out this thread? http://www.camaro5.com/forums/showthread.php?t=33104 I don't know anything about the mufflers you are talking about, but am interested in hearing your set-up when completed. The Resonated X pipe will help keep things somewhat in check. Another popluar option is add the X pipe and do a muffler delete all together. As the X pipe is basically a muffler too. Yes the stock 2.25 pipe will work fine. See my photo for referance. Attached Images __________________ MY BUILD

07-14-2015, 08:54 AM	#3
Linker239 Drives: 2022 WC 2SS Join Date: Jan 2011 Location: Searcy, Arkansas Posts: 2,466 View My Garage	I figure that they will be similar to my cherry bombs. Yes they will be loud, not as bad as a muffler delete, a little more refined. But the x-pipe will make it quieter. My cherry bombs were unbearablely loud untill I put the x pipe on. __________________ Current 2022 Wild Cherrry 2SS; Recaros, NPP, 5 Split Spoke Polished Rims, Satin Black Package Ordered 7-11-2023 1100: Riptide Blue 2SS, Not Built 2023 Red Hot 1LT RS V6; Sold 2010 VR 1LT RS; Sold

07-14-2015, 12:36 PM	#4
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	I think you are going to have yourself a great setup there. Its something I wanted to try on my car, but never did. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

07-15-2015, 02:25 PM	#8
Linker239 Drives: 2022 WC 2SS Join Date: Jan 2011 Location: Searcy, Arkansas Posts: 2,466 View My Garage	Yea 275 was a little pricey. __________________ Current 2022 Wild Cherrry 2SS; Recaros, NPP, 5 Split Spoke Polished Rims, Satin Black Package Ordered 7-11-2023 1100: Riptide Blue 2SS, Not Built 2023 Red Hot 1LT RS V6; Sold 2010 VR 1LT RS; Sold

07-14-2015, 02:52 PM	#5
BlazeLuca Drives: 2010 2LT/RS Join Date: May 2015 Location: Oklahoma Posts: 19	Thanks for the replies guys, I'm worried that it will either be too loud. Or that it might not fit my stock pipes correctly. Also how much do you think a muffler shop will charge to weld these in?

07-15-2015, 09:48 AM	#6
BlazeLuca Drives: 2010 2LT/RS Join Date: May 2015 Location: Oklahoma Posts: 19	New update, called local muffler shop for a quote on installation and they told me about $275. Does that sound right? Seems a little expensive to me. All they would do is cut out the old and weld the new.

07-15-2015, 11:16 AM	#7
BlazeLuca Drives: 2010 2LT/RS Join Date: May 2015 Location: Oklahoma Posts: 19	Okay called a new shop and they said it would be about an hour and a half of work so they would charge $140.

07-21-2015, 10:49 AM	#9
BlazeLuca Drives: 2010 2LT/RS Join Date: May 2015 Location: Oklahoma Posts: 19	All of my stuff came in today, me and a buddy are gonna install it today or tomorrow. Ready to hear it.