So... MRT Exhaust Version 2.0 - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Beauwulf · 11-07-2009, 07:47 PM

Not bad at all! Good gains on the pump.... What were the conditions today?

scrming · 11-07-2009, 07:53 PM

Quote:

Originally Posted by Beauwulf

Not bad at all! Good gains on the pump.... What were the conditions today?

Thanks... 67 degrees (was supposed to only be a high of 55 today!!!). Barometer was LOW... 29.6 to 29.7... DA was probably around 1800... Normally this time of year it should have been well under 1000! Track is open until the end of the month so hopefully I can get back out there at least once more.

Beauwulf · 11-07-2009, 08:19 PM

I got one of those Kat Matrix timers to try out. Wednesday is T&T nite at PBIR so I'll get some real times to compare both the Matrix and my IPhone "Dynolicious" app for accuracy....

I did a car show today. There was alot of interest in the 10... The "pick of the litter" for me was this '69 Z28!

All I got today from the show was a door ding! Stopped on the way to the show for coffee and it must have happened while I was inside.... I spent 2 hours yesterday getting her ready so I know it wasn't there before! Bummer....

robkesl · 11-08-2009, 11:03 AM

now with both systems scrming there were no other modifications besides the system right? no change in size of pipes from cats? no modifications to existing resonators or cats?

scrming · 11-08-2009, 11:07 AM

Quote:

Originally Posted by robkesl

now with both systems scrming there were no other modifications besides the system right? no change in size of pipes from cats? no modifications to existing resonators or cats?

Correct. This is an "axle back" system... so you are cutting off the stock mufflers just behind the axles...

MikesZ · 11-08-2009, 11:12 AM

Whatever the version in the bottom video is sounds 100% better to me...smoother tone = less "ricey".

scrming · 11-08-2009, 12:12 PM

Quote:

Originally Posted by MikesZ

Whatever the version in the bottom video is sounds 100% better to me...smoother tone = less "ricey".

Not sure exactly which video you are referring to... so I retitled some of them...

efpardo · 11-08-2009, 02:23 PM

I must say, having heard Scrmings exhaust in person, I hope my decision to get the solo exhaust was not an error. Well I'm sure it will sound great, and so does this V2 of rhe MRT cat back. It's got a nice rolling grumble at idle. Reving the engine is much louder than stock but not obnoxious. And, I hate this term, but for all of you with a mullet, or if your dad has one--ricey it is not. On the track, the sound is strong and agressive. it sounds more like a supercar than a V8 wannabe. If you are fence for this system, go for it.

scrming · 11-08-2009, 02:44 PM

Quote:

Originally Posted by efpardo

I must say, having heard Scrmings exhaust in person, I hope my decision to get the solo exhaust was not an error. Well I'm sure it will sound great, and so does this V2 of rhe MRT cat back. It's got a nice rolling grumble at idle. Reving the engine is much louder than stock but not obnoxious. And, I hate this term, but for all of you with a mullet, or if your dad has one--ricey it is not. On the track, the sound is strong and agressive. it sounds more like a supercar than a V8 wannabe. If you are fence for this system, go for it.

Thanks!

Looking forward to your Solo review!

(The MRT kits are axle-backs though)

JesseJames · 11-08-2009, 04:16 PM

Quote:

Originally Posted by efpardo

I must say, having heard Scrmings exhaust in person, I hope my decision to get the solo exhaust was not an error. Well I'm sure it will sound great, and so does this V2 of rhe MRT cat back. It's got a nice rolling grumble at idle. Reving the engine is much louder than stock but not obnoxious. And, I hate this term, but for all of you with a mullet, or if your dad has one--ricey it is not. On the track, the sound is strong and agressive. it sounds more like a supercar than a V8 wannabe. If you are fence for this system, go for it.

You heard the V2? I'm up in the air with going for this or SOLO

scrming · 11-08-2009, 04:21 PM

Quote:

Originally Posted by JesseJames

You heard the V2? I'm up in the air with going for this or SOLO

Yep, what he heard yesterday was Ver 2.0....

MikesZ · 11-08-2009, 04:24 PM

Quote:

Originally Posted by scrming

Not sure exactly which video you are referring to... so I retitled some of them...

Sorry, I took another listen and version 2.0 seems to have a smoother tone...not so raspy/ricey.

scrming · 11-08-2009, 04:44 PM

Quote:

Originally Posted by MikesZ

Sorry, I took another listen and version 2.0 seems to have a smoother tone...not so raspy/ricey.

Yep... ver 2.0 is quieter, more subdued and not so raspy... However I do not consider ver 1.0 ricey at all...

MikesZ · 11-08-2009, 04:48 PM

Quote:

Originally Posted by scrming

Yep... ver 2.0 is quieter, more subdued and not so raspy... However I do not consider ver 1.0 ricey at all...

To my ears, version 2.0 has a deeper tone (???) as well. Nice.

11-07-2009, 07:47 PM	#71
Beauwulf Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009 Location: Florida Posts: 1,529	Not bad at all! Good gains on the pump.... What were the conditions today? __________________

11-07-2009, 08:19 PM	#73
Beauwulf Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009 Location: Florida Posts: 1,529	I got one of those Kat Matrix timers to try out. Wednesday is T&T nite at PBIR so I'll get some real times to compare both the Matrix and my IPhone "Dynolicious" app for accuracy.... I did a car show today. There was alot of interest in the 10... The "pick of the litter" for me was this '69 Z28! All I got today from the show was a door ding! Stopped on the way to the show for coffee and it must have happened while I was inside.... I spent 2 hours yesterday getting her ready so I know it wasn't there before! Bummer.... __________________

11-08-2009, 11:12 AM	#76
MikesZ Group Provocateur Drives: Long Distances Join Date: Jun 2009 Location: Arizona Posts: 1,022	Whatever the version in the bottom video is sounds 100% better to me...smoother tone = less "ricey". __________________

11-08-2009, 02:23 PM	#78
efpardo Deep6 Drives: 2016 Camaro #182300 \| 2SS \| HBM Join Date: Apr 2009 Location: Lansing, MI Posts: 1,203 View My Garage	I must say, having heard Scrmings exhaust in person, I hope my decision to get the solo exhaust was not an error. Well I'm sure it will sound great, and so does this V2 of rhe MRT cat back. It's got a nice rolling grumble at idle. Reving the engine is much louder than stock but not obnoxious. And, I hate this term, but for all of you with a mullet, or if your dad has one--ricey it is not. On the track, the sound is strong and agressive. it sounds more like a supercar than a V8 wannabe. If you are fence for this system, go for it. __________________ My Journals: Erick's Mistress - Violet 2016 2SS #182300 \| 2SS \| HBM \| Erick’s Mistress - 2010 2LT #8212 \| 2LT \| RS \| CGM \| Litho #165 \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Corsa Exhaust in stock and available	GmPartsDirect.com	V8 Bolt-Ons & Tunes	3	10-29-2009 08:28 AM
GMPP Exhaust (street version), sounds good!! UPDATED WITH VIDEO	Scott@Bjorn3D	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	45	07-29-2009 06:43 PM
Waiting on GFX... Version 2.0	Lucky SOB	5th Gen Camaro SS LS LT General Discussions	29	07-29-2009 06:33 AM
Need Help with upgrade exhaust and Electric cutoffs	Camaro007	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	04-19-2009 09:44 AM

11-08-2009, 11:03 AM	#74
robkesl Drives: 2010 camaro Join Date: Oct 2009 Location: st. louis Posts: 42	now with both systems scrming there were no other modifications besides the system right? no change in size of pipes from cats? no modifications to existing resonators or cats?