04-17-2022, 11:47 AM | #1 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
2013 1LE Road Race/Drag Race/Street Race Build
While I’ve had the car for a bit, I figured better late than never to start a build thread. I’ve been around the forums for a while (LS1tech, LS1GTO, G8board, etc), so you can see some other builds there if interested. This will be documenting my 2013 1SS 1LE. Please give me some time to post everything, but I will get various stuff up along with pictures sooner than later.
I’m the fourth(!) owner of this one. Original owner was from up here in Pittsburgh area and didn’t put a lot of miles on it. They added a Rotofab and Kooks with cats. It then was purchased by someone in Texas who added a BTR Stage 4 cam and supporting mods making 450rwhp on a Mustang dyno. They street raced to crap out of it, and you can see videos of their ownership by searching the YouTube channel for “itsahellcat”. It was then purchased by a college friend who only put a couple thousand miles on it before I flew down to Texas to bring it back to Pittsburgh area. The goal for the car is just a solid all-around performer that can be driven at 10/10ths on any type of track and still driven home. Follow along and feel free to laugh, insult, or whatever other emotion one might experience reading this
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
04-17-2022, 11:49 AM | #2 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Post Reserved For Mod List
4/17/2022
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
05-06-2022, 08:20 PM | #3 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Almost done… will update soon…
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
05-17-2022, 08:30 PM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,059
|
Why the gold tape just around the MAF Sensor?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-17-2022, 11:43 PM | #5 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,192
|
Subscribed!
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
05-18-2022, 06:19 AM | #6 |
Anthony S
Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021
Location: Chiefland, FL
Posts: 787
|
Looks like it is also lining the entire bottom of the intake tube. Probably to keep the ambient heat from the upper radiator hose from directly heating up the intake air temps.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181 Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links. |
05-18-2022, 06:44 AM | #7 |
GPI Sales Consultant
|
Subbed! Looking forward to seeing this build come back together and be better than ever!
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
05-18-2022, 02:56 PM | #8 | |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Quote:
I will be updating soon. 490hp/440tq… and a bumper ripped off…
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
|
05-18-2022, 07:36 PM | #9 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,059
|
Ok cool on the gold tape where’s the best place to get it?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-18-2022, 08:13 PM | #10 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
I got it from Amazon, but most parts places like Summit have it. Just search for DEI or Design Engineering gold tape. I just got a 12x12 sheet.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
05-24-2022, 05:53 PM | #11 |
Drives: 2012 2ss stick. Boosted 45th! Join Date: Oct 2020
Location: So Cal
Posts: 44
|
Hey Demon, I remember you from the GTO forums. Looking forward to the build info. Best of luck and hope you haul some ass.....
__________________
45th Anniversary.stick. Boosted!
|
08-04-2022, 10:22 AM | #12 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
I have admittedly dropped the ball actually making this a good build thread. Major fail on my part lol
I have, however, made a for sale listing as I’m ordering a new 1LE. You can see it here: https://www.camaro5.com/forums/showthread.php?t=608079
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
08-04-2022, 12:19 PM | #13 |
GPI Sales Consultant
|
Sad to see it go, excited to see a new one take it's place!
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
08-04-2022, 03:19 PM | #14 |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,204
|
Definitely enjoyed all the info you shared with your '13.The question is with that nice, shiny new 6th Gen will you be afraid of the wall?
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
|
|
Thread Tools | |
|
|