11-22-2015, 12:25 PM | #1 |
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
ZL1 Front Bumper Swap Harness?
I plan on purchasing a new ZL1 front bumper but unaware of what type of harness I will need to make the lights work? I currently have the AAC DRL harness and their upgradedata LED fog lights bulbs on my 2011 2SS. Will this setup work essentially the same on the new front bumper?
|
11-23-2015, 10:17 PM | #2 |
SoCal HT5
Drives: 2013 VR 2SS/RS Join Date: May 2010
Location: Northridge, CA
Posts: 344
|
__________________
|
11-24-2015, 01:06 AM | #3 | |
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
Quote:
How i just have to figure out if they will all run together as i currently have the DRL's hooked into my headlights so the DRL's run when the halo's are on or when the headlights are on.. Not sure if this will cause the Lower ZL1 fog lights to also be running? |
|
11-25-2015, 12:15 AM | #4 |
SoCal HT5
Drives: 2013 VR 2SS/RS Join Date: May 2010
Location: Northridge, CA
Posts: 344
|
I had the same set up as you did. I'm guessing you just have that plug and play harness that allows the fogs to come on with the halos and/or headlights? If so, I'm pretty sure you would just take that harness out before installing this one. This new harness will have all the lights on together. There is a version with a switch so you can manually control the fog lights if you like as well.
__________________
|
|
|
|
|