12-11-2012, 12:31 PM | #1 |
Jeremy Frye
Drives: 2016 Hyper blue 1SS Join Date: Jul 2010
Location: pleasant hill ca.
Posts: 850
|
T3 bumper ports?
Is there anyone else making a T3 style bumper ports? I have looked all over Ebay, google etc.. with no luck. I really like the look but $400 for the ports, $200 for the lights, $99 for the mesh, and $125 for paint plus you still have to do all the work yourself. Just not worth it.
__________________
|
12-11-2012, 01:09 PM | #2 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
I can tell you seems like alot, but the product is TOP NOTCH!! I just installed on mine and the pod lights that come with the kit are the BEST/BRIGHTEST I have seen. Sometimes you get what you pay for. Customer Service is also hands down one of the best I have delt with.
|
12-11-2012, 01:11 PM | #3 |
SoCal HT5! SD
Drives: 2016 red hot 2ss M6 Join Date: Nov 2011
Location: San Diego CA,
Posts: 1,929
|
HPE has something similar in the works. Check it out: http://www.camaro5.com/forums/showth...=253948&page=3
They are supposed to be less expensive, but they are still in the initial design phase.
__________________
http://www.camaro5.com/forums/showth...37#post5437037
By my deeds, I honor him. V8!!! |
12-11-2012, 01:15 PM | #4 | |
|
Quote:
ACS products are the best that we have seen on the market as far as body parts, their customer service is hands down one of the best. If there is ever any problem they will make it right. |
|
12-11-2012, 01:28 PM | #5 | |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Quote:
Agreed ACS is the best!! I had an issue with my installer not doing Hood ports correctly when installed. I spoke with ACS and they more than took care of me and stayed in contact throughout entire process. I would definately buy products again |
|
12-11-2012, 01:52 PM | #6 |
TRI-COUNTY CAMAROS
Drives: 2SS/RS Oct 2009 Join Date: Oct 2009
Location: Coral Springs Florida
Posts: 448
|
I used the hydrocarbon ports, saved on painting! As for Mesh, I got offcuts from custom car grills for about $20. I did use the triple eagle lights and modified (cut the L off and smoothed out, painted)
http://www.camaro5.com/forums/album.php?albumid=11885 I will vouch for the quality, and the 'whole' package, i bought mine through Phastek
__________________
GET-TORQ custom CAM 223/243 LSA113, Full LS3 conversion, 3200 stall Multi-Disk TC from Circle-D, B&M Supercooler to cool that tranny down....1 7/8" Kooks Headers and High flowCats. MACH XL Catbacks. Eibach springs, R2C Performance CAI, powdercoated calipers, Footwell lighting in tune with dome lights, tints, ABL Lighting, ACS T3 ports and ACS Eagle T3 triple LED lighting kit. Heritage grill, Hex vents, ZL1 rockers, ZL1 Diffuser, Quad tips...the list keeps getting longer - whats next?? |
12-11-2012, 10:24 PM | #7 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Definitely a great product and does change the whole look of your car! I thought it was well worth the money.
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
11-25-2015, 12:39 PM | #8 | |
Obsessive camaro disorder
|
Quote:
Tho
__________________
**2010 2ss/rs**
|
|
11-26-2015, 10:24 AM | #9 | |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Quote:
This was 3 years ago...car looks quite different now.
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
11-26-2015, 12:05 PM | #10 |
Obsessive camaro disorder
|
Love to see it now..cars looks awesome..just ment you took it to the limit..did u do the install on the bumper ports n hood vents..any install issues?
__________________
**2010 2ss/rs**
|
11-26-2015, 01:45 PM | #11 |
|
I think looks awesome! I have hex vents and wondered what those hood inserts would look like with them - may have to go for this with those!
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
11-27-2015, 04:14 PM | #12 | |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Quote:
Yes i did all the installs. The ACS bumper ports were easy. The ACS hood ports were an absolute PAIN IN the ARSE!! (Lower front of the hood). The Hex vents in the center were cake!! Just takes patients to actually cut up your car. This is the car now, Basically new front bumper, custom paint and a lot of motor work.
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
11-27-2015, 04:55 PM | #13 |
Obsessive camaro disorder
|
Cool deal ..thinking hard bout the hex vents n bumper ports..are there templets good for hole placement.love the red ...
__________________
**2010 2ss/rs**
|
11-27-2015, 10:05 PM | #14 |
|
That the aggressor 2 bumper? Any issues with fitment?
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
|
|
|
|