Long tubes + !Cats + X Pipe + Moroso Spiral Flows - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

aggieguy13 · 03-25-2014, 11:26 AM

http://youtu.be/_Rf-xumCixY

Sent from my iPhone using Tapatalk

McBeevee · 03-25-2014, 11:34 AM

Quote:

Originally Posted by Pro Stock John

Jerk!!!

Quick video I snapped today, I know it's sideways it takes a while for it to fix that....

http://youtu.be/frGGeAoUSuo

I like it John...sounds damn good.

Pro Stock John · 03-25-2014, 12:00 PM

If I do H/C it might end up being too loud for me, in which case I'll do some bigger mufflers.

grocerygetter · 03-25-2014, 02:42 PM

I want a mix of that with the deep sound my car has. thought about doing dual 3" on mine through a X and dual bullets dumping at rear diff...then still be able to close the dumps and go out the existing dual 2.5" magnaflows to kill drone when cruising.

Pro Stock John · 03-25-2014, 04:36 PM

I don't know how much drone I have cruising, I've only driven in traffic, but hopefully the X pipe will help with that.

I think there is a strong chance I will change mufflers for heads and cam. How are those round GM mufflers, the ones that look like Borlas?

angryv6 · 03-25-2014, 07:40 PM

Sounds great John.

Pro Stock John · 03-26-2014, 08:43 AM

Josh I still hafta say, the car feels quicker with the x pipe and !cats. Hopefully I can hit the track soon and the slips will tell me if the buttometer is accurate.

I can hear at least one exhaust leak, so I'll stop by my local chain Velasquez Brothers and have them weld the exhaust up.

Pro Stock John · 03-27-2014, 02:15 PM

I finally drove the car in lighter traffic and was able to cruise at 50, 60, 70, and 80 MPH.

Mostly good, some bad. The drone with light gas pedal, in 6th gear, at like 1700-1900 RPMs is pretty rough. Like Mustang Foxbody with Flows back in the day rough.

For the moment I'm okay with it. I'm not going to add a bunch of weight back in by doing stock mufflers, but I'm open to 2.5" inlet muffler ideas.

03-25-2014, 11:26 AM	#29
aggieguy13 Drives: 2013 SS/RS VR 1LE Join Date: Jun 2013 Location: MCKINNEY,TX Posts: 1,278 View My Garage	http://youtu.be/_Rf-xumCixY Sent from my iPhone using Tapatalk __________________ 2013 SS/RS 1LE VR-Backup System, SOLO Perforsance HF Cats, Muffler Delete, BBK Off-road X-pipe 2002 35th Aniversary SLP SS-Sold

03-25-2014, 12:00 PM	#31
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	If I do H/C it might end up being too loud for me, in which case I'll do some bigger mufflers. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

03-25-2014, 02:42 PM	#32
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	I want a mix of that with the deep sound my car has. thought about doing dual 3" on mine through a X and dual bullets dumping at rear diff...then still be able to close the dumps and go out the existing dual 2.5" magnaflows to kill drone when cruising. __________________ -John S.

03-25-2014, 04:36 PM	#33
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I don't know how much drone I have cruising, I've only driven in traffic, but hopefully the X pipe will help with that. I think there is a strong chance I will change mufflers for heads and cam. How are those round GM mufflers, the ones that look like Borlas? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

03-25-2014, 07:40 PM	#34
angryv6 Lake Erie Monster Drives: 02 Hyundai Santa Fe and 13 300 Join Date: Aug 2012 Location: Ohio Posts: 917	Sounds great John. __________________ Everything I say is to be taken as an opinion and not fact so don't get upset over words that spill out of my head. GO CAVS!

03-26-2014, 08:43 AM	#35
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Josh I still hafta say, the car feels quicker with the x pipe and !cats. Hopefully I can hit the track soon and the slips will tell me if the buttometer is accurate. I can hear at least one exhaust leak, so I'll stop by my local chain Velasquez Brothers and have them weld the exhaust up. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

03-27-2014, 02:15 PM	#36
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I finally drove the car in lighter traffic and was able to cruise at 50, 60, 70, and 80 MPH. Mostly good, some bad. The drone with light gas pedal, in 6th gear, at like 1700-1900 RPMs is pretty rough. Like Mustang Foxbody with Flows back in the day rough. For the moment I'm okay with it. I'm not going to add a bunch of weight back in by doing stock mufflers, but I'm open to 2.5" inlet muffler ideas. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800