05-01-2011, 07:40 AM | #71 |
Drives: 2010 ss. 1990 RS the faster one. Join Date: Jan 2011
Location: Orlando
Posts: 549
|
No drone? Quiet as stock? That's funny. I have this system and love it. 6th gear at 45 is quiet but other than that it can be heard and it will drone.
|
05-01-2011, 07:53 AM | #72 |
Hugger Orange
Drives: 2010 Hugger Orange 2SS/ RS YSI/4l80 Join Date: May 2010
Location: Marysville Ohio
Posts: 535
|
I have no drone at highway speeds at all and is just as quiet as stock at those speeds. Get on the gas and that is a diffrent story,loud and sounds good. People that have driven my car or that have ridden in it have said the same thing so I know it is not just me. Have a nice day.
|
05-01-2011, 10:24 AM | #73 |
Drives: 2011 2SS/RS LS3 Join Date: Apr 2011
Location: ohio
Posts: 141
|
I have drone on the highway in 6th gear till i get to 2000 rpm then it goes away..
__________________
2011 SS/RS M6 Synergy green 559RWHP...530RWTQ
Mods: Maggie supercharger...LS9X Twin disk clutch..85lb Fast inj..ZL1 Fuel pump..,MSD BAP..Roto-Fab cold air..Hotchkis max chassis brace, strut brace,, sway bars front and rear ,HD end links.adj toe link,lower control arm,,trailing arm,, Norris catch can..XS Power 1 7/8 ss lt headers..3" cat delete..3"X pipe..XS 3" mufflers. Hurst shifter.. Lowering springs..22" Foose wheels. Boost/vac ..Fuel pressure gauge..GPS stereo Head unit, all speakers and amp 4 10" subs..Ram air hood.heat extractors .Custom leather interior.Escort 9500ci.. |
05-03-2011, 03:01 PM | #74 |
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
I am installing SOON and need some input ASAP...Anyone else??
So has anyone else used the supplied? I was thinking about buying some hardened bolts and nuts to replace the ones that came with it and try to get em tight and see how that goes. I am not cheap, but I would rather try and get these to work without spending $75 on new clamps. If I do need clamps, should I only replace the all 6 with the lap style like this; http://www.jegs.com/i/JEGS-Performan...30733/10002/-1 Last edited by Tshepp; 05-03-2011 at 03:32 PM. |
05-03-2011, 03:59 PM | #75 | |
Hugger Orange
Drives: 2010 Hugger Orange 2SS/ RS YSI/4l80 Join Date: May 2010
Location: Marysville Ohio
Posts: 535
|
Quote:
|
|
05-03-2011, 04:09 PM | #76 |
Hugger Orange
Drives: 2010 Hugger Orange 2SS/ RS YSI/4l80 Join Date: May 2010
Location: Marysville Ohio
Posts: 535
|
I can see now why a few said they had drone and I did not. I live in Marysville and it is flat groung everywhere. Drove the car yesterday and got it on a long up hill climb on the interstate and it did drone quit a bit in 6th gear and it did get considerably louder in the cabin. Sorry if I mislead anyone. Other than that it is a pretty quiet in the cabin.
|
05-03-2011, 04:12 PM | #77 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
I took my 2" headers off yesterday and noticed a small amount of rubbing on the passenger side rail. So slight, I think a 1 7/8" would not have the issue. I used a socket and dented the header where the rubbing was. It was so faint on the header it was basically paint transfer. I touched up the frame with some satin black. and you can't even tell now.
|
05-03-2011, 05:03 PM | #78 |
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
I said screw it and went ahead and ordered 6 of the Dynomax/Walker 33272 lap joint clamps. After looking at the supplied pieces I really think its going to be too much of a headache to try and get them to work and I'd rather just do it the right way. I don't want to weld it because I want to be able to remove or change easily if I want to. If the car needed to be serviced I would hate to have the exhaust cut off. Well, let's see if the clamps will be here by this weekend so I can get this bad boy on!!
|
05-03-2011, 05:10 PM | #79 |
Drives: 2ss rs M6 Join Date: Oct 2010
Location: baton rouge la.
Posts: 66
|
Hey where did u order those clamps from
|
05-03-2011, 05:27 PM | #80 | |
Hugger Orange
Drives: 2010 Hugger Orange 2SS/ RS YSI/4l80 Join Date: May 2010
Location: Marysville Ohio
Posts: 535
|
Quote:
|
|
05-03-2011, 06:06 PM | #81 |
Camaro Owner Since 1987
Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006
Location: Lawrenceville, GA
Posts: 2,185
|
I bought some band clamps from Advance Auto. I bought six. I have not bought the other hardware. I guess I need to.
Bill
__________________
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop Rx Catch Can;Rx Breather;Roto-Fab Washer Container VMax Ported RJT Throttle Body XSPower Headers and XSPower 3" Exhaust System Elite Engineering Tunnel Brace, Gorilla Wheel Lock System; Bear Rotors, Hawk HPS Tinted Windows 35%;EFILive Tune |
05-03-2011, 08:23 PM | #82 |
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
I ordered them from here;
http://www.summitracing.com/parts/WLK-33272/ |
05-03-2011, 08:24 PM | #83 |
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
|
05-03-2011, 08:37 PM | #84 |
Every day is a happy day
Drives: 2011 2SS/RS BLK/BLK Join Date: Aug 2010
Location: Portland, Oregon
Posts: 239
|
My second set of clamps worked perfectly "MEGA-CLAMP #33272" all of the way back. Once my V Max T/B is here I can fire the beast up...
__________________
2011 Camaro 2SS/RS A6 Black on Black 2002 S10 PickUp 2007 Victory Red SS Cobalt "For Sale, My wife wants a Chevrolet Volt" |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADM Performance "Street" and "Race" intake systems from Apex Motorsports | Apex Motorsports | V8 Bolt-Ons & Tunes | 12 | 07-16-2010 07:47 PM |
STS Twin Turbos | SupremacyCustoms | Forced Induction - V8 | 0 | 02-16-2010 01:35 PM |
Corsa Group Buy $1150 Shipped - V6, V8 Systems! | BMC Performance | V6 Bolt-Ons & Tunes | 35 | 10-13-2009 10:21 AM |
Procharger supercharger now available for new Camaro | khislop007 | Forced Induction - V8 | 55 | 07-07-2009 04:15 PM |