Occasional Track Guy - Do I need endlinks? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rogan · 08-27-2011, 04:44 PM

Will I need endlinks on street tires (maybe INVOs) for autox & road course events?

The Stig · 08-27-2011, 04:52 PM

Do you have any other suspension mods?

Rogan · 08-27-2011, 04:57 PM

About to put lowering springs & sway bars from pfadt.

The Stig · 08-27-2011, 04:58 PM

I'd get the endlinks to be safe. I'd also get Pfadt's RLCA fix as well, just to be safe.

ericedelman · 08-27-2011, 09:23 PM

If you're replacing the sway bar, you may as well do the end links since half the work is done and you're already under the car, you'll already be getting an alignment, etc....

They will also be handy if you decide to move to a coilover and want to corner balance the car.

Quote:

Originally Posted by Rogan

About to put lowering springs & sway bars from pfadt.

axis · 08-28-2011, 08:22 AM

Quote:

Originally Posted by stieger

I'd get the endlinks to be safe. I'd also get Pfadt's RLCA fix as well, just to be safe.

I"m pretty sure that Pfadt is encorporating the RLCA fix into their new endlinks.

brantley847 · 08-28-2011, 08:50 AM

haven't some guys had issues with end links and unwanted noise? Sorry for the newbie question, but what is the benefit to end links with the addition of sways and springs.

Rogan · 08-28-2011, 08:58 AM

Quote:

Originally Posted by brantley847

haven't some guys had issues with end links and unwanted noise? Sorry for the newbie question, but what is the benefit to end links with the addition of sways and springs.

^this

Jaysin · 08-28-2011, 09:12 AM

The Pedders endlinks are quit.

Rogan · 08-28-2011, 09:34 AM

Quote:

Originally Posted by Jaysin

The Pedders endlinks are quit.

Maybe I am just too old or too young as I am not familiar with "are quit" . Maybe you meant quite?

Sterling · 08-28-2011, 09:36 AM

Quote:

Originally Posted by Rogan

Maybe I am just too old or too young as I am not familiar with "are quit" . Maybe you meant quite?

Pretty sure he meant quiet...

Rogan · 08-28-2011, 09:38 AM

Thanks. So pfadt has had some noise issues I assume?

Rogan · 08-28-2011, 09:55 AM

Quote:

Originally Posted by Sterling

Pretty sure he meant quiet...

Hey I see your pic in sig. No sway bars yet?

Apex Motorsports · 08-28-2011, 10:06 AM

If you are tracking your car at all I would suggest upgrading your end links. The stock ones can not handle hard use when attached to stiffer aftermarket sway bars. Pfadt's sway bars now include the RLCA reinforcement brackets that were mentioned earlier in the thread. Their newly redesigned end links should be shipping any day now.

08-27-2011, 04:44 PM	#1
Rogan No Pain No Gain Drives: Yellow 5th Gen 2SS RS Join Date: Aug 2009 Location: GA Posts: 1,519	Occasional Track Guy - Do I need endlinks? Will I need endlinks on street tires (maybe INVOs) for autox & road course events?

08-27-2011, 04:52 PM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Do you have any other suspension mods? __________________

08-27-2011, 04:58 PM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	I'd get the endlinks to be safe. I'd also get Pfadt's RLCA fix as well, just to be safe. __________________

08-28-2011, 08:50 AM	#7
brantley847 v It bites. Drives: 2011 IBM 2SS/RS Join Date: May 2008 Location: Orlando, FL Posts: 3,585	haven't some guys had issues with end links and unwanted noise? Sorry for the newbie question, but what is the benefit to end links with the addition of sways and springs. __________________ 2011 2SS/RS Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauging Interest for a track day at Michelin Proving Grounds in Greenville, SC	CamaroSpike23	USA - Southeast	109	10-12-2011 05:12 PM
Feb 19, 2011 ABQ SMS Cars, Coffee, Chile, and Speed (Track Day)!	cjingle	USA - Southwest	19	02-23-2011 08:19 AM
ABQ Track Day at SMS 5/22/10!!!!	Ivan @ Southwest Speed	Camaro Photos \| Spyshots \| Video \| Media Gallery	52	05-25-2010 12:31 AM
Track Day : New Jersey Motorsports Park : Thunderbolt : March 29th 2010	Info@PeddersUSA.com	USA - NY / NJ / PA	0	01-01-2010 04:05 PM
Track Day : New Jersey Motorsports Park : Thunderbolt : March 29th 2010	Info@PeddersUSA.com	USA - New England	0	01-01-2010 03:50 PM

08-27-2011, 04:57 PM	#3
Rogan No Pain No Gain Drives: Yellow 5th Gen 2SS RS Join Date: Aug 2009 Location: GA Posts: 1,519	About to put lowering springs & sway bars from pfadt.

08-28-2011, 09:12 AM	#9
Jaysin Drives: 2015 Chevrolet SS Join Date: Jul 2010 Location: St. Louis, MO Posts: 341	The Pedders endlinks are quit.

08-28-2011, 09:38 AM	#12
Rogan No Pain No Gain Drives: Yellow 5th Gen 2SS RS Join Date: Aug 2009 Location: GA Posts: 1,519	Thanks. So pfadt has had some noise issues I assume?

08-28-2011, 10:06 AM	#14
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	If you are tracking your car at all I would suggest upgrading your end links. The stock ones can not handle hard use when attached to stiffer aftermarket sway bars. Pfadt's sway bars now include the RLCA reinforcement brackets that were mentioned earlier in the thread. Their newly redesigned end links should be shipping any day now.