08-21-2013, 11:45 AM | #1 |
Balancer
My next step in my build, I was informed I may need to replace the balancer (with a ATI) to obtain more horse power safely. Has anyone done this and any feedback would be appreciated.
My Build: LS99 / 521 HP - 561 Torque Ported Throttle body ZL1 fuel Pump Kooks long tubes Roto Fab CAI No Cats 3.2 inch pully (I am at 6000ft elevation) Car tops out at about 5800 RPMS and I start to loose HP... Plenty of Fuel
__________________
Magnuson TVS2300 Supercharger Hotchkis Sport Suspension Kooks Long Tubes DT Cat Back Ehaust RotoFab CAI |
|
08-21-2013, 11:46 AM | #2 |
I also know that my wheels which are 20's but 10.5 wide on the back and heavy are eating some of my HP... but still looking for a bit more
__________________
Magnuson TVS2300 Supercharger Hotchkis Sport Suspension Kooks Long Tubes DT Cat Back Ehaust RotoFab CAI |
|
08-22-2013, 01:57 PM | #3 |
Drives: 2011 Inferno Orange SS Convertible Join Date: Apr 2012
Location: Tyrone, PA
Posts: 640
|
How much boost are you running? If you can't safely run more boost, you need to get away from the stock L99 cam, or add meth and tune for it. Balancer won't add anything worthwhile.
__________________
2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.
|
|
|
|
|