05-24-2013, 06:18 PM | #1 |
Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010
Location: Lebanon, OH
Posts: 1,672
|
Vararam & catch can owners
For those who own the Vararam and a catch can, are you able to mount the catch can on the radiator? I currently have my RX catch can mounted off the radiator and am thinking about purchasing a Vararam. Would I need to move the catch can elsewhere such as the driver side?
__________________
Gordy
Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle |
05-24-2013, 06:24 PM | #2 |
Don't Sleep on My V6
|
Driver side is where everyone mounts it at with the VR. Don't recall if anyone has got it on the PS. Her was my set up before I switched up.
__________________
|
05-24-2013, 07:16 PM | #3 |
13.453 @ 101.90
Drives: 2010 Camaro 2LT Rally Yellow Join Date: May 2009
Location: SE Pa.
Posts: 1,877
|
My RX CC has been mounted on the Rad bolt for a good while now with the Vararam with no problems.
__________________
GMPP exhaust/JBA shorties/Vararam CAI/VMax TB/SLP Pulley/VMax IM isolator/MACE Ported IM +Plenum Spacer/IPF Tuned |
05-24-2013, 07:20 PM | #4 |
Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010
Location: Lebanon, OH
Posts: 1,672
|
Cool! Thanks! I was hoping it would fit so I wouldn't need to go and buy some hose to reach the driver side.
__________________
Gordy
Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle |
05-24-2013, 07:35 PM | #5 |
Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010
Location: Albany, Ga.
Posts: 3,398
|
Mine is also on the drivers side
__________________
PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.
|
05-24-2013, 07:42 PM | #6 |
Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010
Location: Albany, Ga.
Posts: 3,398
|
Pics
__________________
PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.
|
05-24-2013, 07:52 PM | #7 | |
|
Quote:
|
|
|
|
|
|