Adding a ZL1 front end to your car.

[gotpball44]

Originally Posted by Buffnshine

I believe its the same as the Havoc one

I been comparing them, and they are a bit different. I get a pretty good hook up on chevy parts, so want to see how much it is. Cause all the HAVOC stuff is so expensive.

[sene]

In know I'm spamming this post but I've got a ZL1 facia on its way to me!

[2SSRS@Gen5diy]

Originally Posted by gotpball44

Can you make a list of every part number that you need to change the front bumper only to the zl1? I know u scanned the paper showing, but can you just list them so i can actually just bring it to chevy and order the part?

For ex:
Part 1:
Part 2:
etc....

Thanks, your the man!

I will but here is what i fear, i will tell you # to buy and then i find you dont need them.

So i will update the firs post with # i know we need for now and add as we go on from here.

Originally Posted by gotpball44

also do you have the part number for the zl1 side skirt?

Not at this time but i will see if there are.

Originally Posted by sene

You can't trasnscribe it from the scanned image? C'mon that's just being lazy

What dealer are you using?

I normally do it that way but see why on this post.

Originally Posted by Buffnshine

I believe its the same as the Havoc one

Will see if it it will be less from GM

Originally Posted by sene

If you look at the fine print from all those huge online GM part retailers they all say that bumpers, facias, body parts are extra to ship and the calculated shipping (X% of the total price) is in accurate and they will charge you the remainder. I e-mailed around and it looks like $150 - $250 just in shipping to get this to my door.

My next question was for Ofer was will this fit in my Camaro so i can pick this up from my local dealer.... pretty sure my Camaro can't transform into a pick-up truck like in the picture.

No it will not

Originally Posted by gotpball44

I probably can, just want to make sure i get everything and dont get the things i dont need.

Originally Posted by gotpball44

I been comparing them, and they are a bit different. I get a pretty good hook up on chevy parts, so want to see how much it is. Cause all the HAVOC stuff is so expensive.

Will see

Originally Posted by sene

In know I'm spamming this post but I've got a ZL1 facia on its way to me!

[gotpball44]

Very cool thanks,

As of right now do you think it will be safe buying the front bumper? Does all the bolt holes and whatever line up to the SS? Would you know that much yet? Want to get the bumper before it goes on back order and raises price, just don't want to find out later on that there is no way it will fit without a lot of modifications.

[2SSRS@Gen5diy]

It will fit i know that i test fit it on my car this mourning, where good to go on that.

[IOM Black Diamond]

2SSRS Do you have the lower grill yet? And what does it cost? I see your location says by the lake. Do you live in Lake Havasu?

[cbrniner]

Okay , Heres a question I don't think I have seen asked .... I know most of you that are doing this conversion will be using the ZL1 hood , But I won't ... So my question is on the ZL1 nose , Is the slope on the nose the same that a stock hood or a current after market hood like the Sinister hood (which is most likely what I am doing) would match the slope angle of the ZL1 Bumper ??? Would it fit pretty much as it does now with the SS nose... Im just curious ...im just wondering with some of the wind tunnel testing if they changed the slope angle at all on the ZL1 nose and hood ..

[2SSRS@Gen5diy]

Originally Posted by DirtNMyTeeth

2SSRS Do you have the lower grill yet? And what does it cost? I see your location says by the lake. Do you live in Lake Havasu?

No its not out right now soon, and yes in Lake Havasu.

Originally Posted by cbrniner

Okay , Heres a question I don't think I have seen asked .... I know most of you that are doing this conversion will be using the ZL1 hood , But I won't ... So my question is on the ZL1 nose , Is the slope on the nose the same that a stock hood or a current after market hood like the Sinister hood (which is most likely what I am doing) would match the slope angle of the ZL1 Bumper ??? Would it fit pretty much as it does now with the SS nose... Im just curious ...im just wondering with some of the wind tunnel testing if they changed the slope angle at all on the ZL1 nose and hood ..

Its the same, i looked right now one more time, i will post pics at the end of the day for that and me new bumper.

[cbrniner]

Okay , Heres what I am hoping mine will look like

[2SSRS@Gen5diy]

It will.

[khislop007]

Originally Posted by 2SSRS

It will fit i know that i test fit it on my car this mourning, where good to go on that.

Originally Posted by 2SSRS

No its not out right now soon, and yes in Lake Havasu.



Its the same, i looked right now one more time, i will post pics at the end of the day for that and me new bumper.

Nice! Just what i wanted to hear.

Originally Posted by cbrniner

Okay , Heres a question I don't think I have seen asked .... I know most of you that are doing this conversion will be using the ZL1 hood , But I won't ... So my question is on the ZL1 nose , Is the slope on the nose the same that a stock hood or a current after market hood like the Sinister hood (which is most likely what I am doing) would match the slope angle of the ZL1 Bumper ??? Would it fit pretty much as it does now with the SS nose... Im just curious ...im just wondering with some of the wind tunnel testing if they changed the slope angle at all on the ZL1 nose and hood ..

Yeah I don't planning on changing my hood either.

[ZNOLMT]

Originally Posted by cbrniner

Okay , Heres what I am hoping mine will look like

Nice! Mine is going to be similar, except no bowtie, and a different hood. Think I might work on a photochop soon.

[PittPaz]

Looks good. I'll be following your progress.

[2SSRS@Gen5diy]

Here you go on the car today.