06-07-2013, 02:29 PM | #1 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Shelf Life of Clay Lube?
I've had a spray bottle of Clay Magic lube in my cabinet in the house for about ten years along with the bar, still sealed. I don't see any reason why I shouldn't be able to use the bar, but should I use the lube? The only other option I have right now is to use Adam's detail spray. I've read CamaroDreams07's Comprehensive Product Recommendation Guide (thank you for that), and I read where, even though it can be used for that purpose, there are cheaper alternatives. So, if no to the CM lube, what can I get at a local Autozone that will work? The weather tomorrow morning is going to be perfect for this job, so that's when I plan on starting the process. Thanks!
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
06-07-2013, 02:39 PM | #2 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
any quik detailer will work..but it's a great reason to have Optimum No Rinse (ONR) on your shelf as it can be a rinseless mix, a lube mix or a quik detail mix dpending on how you dilute it...
|
06-07-2013, 02:41 PM | #3 |
|
It'll work fine... that Clay Magic is some of the best clay ever too... I still use some that's probably older than yours.
__________________
|
06-07-2013, 02:44 PM | #4 |
Drives: CGM 2SS/RS, 1987 & 2014 Silverado Join Date: Oct 2010
Location: Spencerport, NY
Posts: 1,012
|
Mothers detail spray comes in the Mothers kit with the clay.
__________________
|
06-08-2013, 06:55 AM | #5 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
Any detail spray will work fine. The meguiars clay kit comes with a bottle of their detail spray for the lube. I'm sure Mothers is the same.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
06-08-2013, 07:10 AM | #6 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Thanks. Since I don't need another Clay bar, I'll get some ONR ordered from Autopia (hope the lid's on tight ) and use my Adams detail spray this time around. Just something about having product around for 10+ years leaves me somewhat skeptical about its effectiveness.
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
06-10-2013, 12:37 PM | #7 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Well I think I should've been just as skeptical of the clay bar as the lube. Even though it was still in its original wrapping, first thing I noticed when I open it the corners of the bar were hard, but after about 15 minutes of kneading and adding some detail spray, it seemed as though it returned to the pliability I was expecting. So, I started on the front fascia after the dawn bath and wiping with more detail spray and everything seemed to go well. Very smooth surface and good wet look to the clearcoat. Fine so far and then I decided to work the hood over. This time I followed what I saw on a video where you go back-n-forth and side to side with not a lot of pressure. Everything seemed okay there as well, but after I washed the car with Adams car wash soap, dried with the waffle weave drying towel and some detail spray, the finish was not smooth at all. Doesn't seem like it was clayed. I noticed in the video where Adam said if the clay bar is sticky, it's effectively dead. Well, mine was sticky but I thought that amount of stickiness was just because there was no lube on it. I'm beginning to think the front fascia came out okay because I was bearing down on it as I have a tendency to do that, whether I'm washing or waxing (bad habit that I'm trying to break because it's not necessary anymore) but I made a point to go easy on the hood. So, do you think my clay bar failed? Time to chuck it?
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
06-10-2013, 02:01 PM | #8 | |
|
Quote:
As far as the stickiness, I haven't heard that before. Go get a brand new claybar from Mother's and unwrap it. It's very sticky and IMO, works extremely well. If I were you, I'd chuck the clay for good and get one of the new clay replacements such as the Speedy Prep towel, or the Nanoskin sponge or towel.
__________________
[B]
|
|
06-10-2013, 02:06 PM | #9 |
Account Suspended
Drives: Busted Join Date: Jun 2013
Location: Home
Posts: 104
|
If its sticky its too warm and not enough lube.
I use a diluted mixture of water and dawn soap. Of course I do a full wax/polish after. |
06-10-2013, 02:32 PM | #10 | |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Quote:
"(within reason, don't be grunting like a Williams sister)" Were you watching the French open this weekend? Chubby!
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
|
06-10-2013, 02:47 PM | #11 | |
|
Quote:
__________________
[B]
|
|
06-10-2013, 02:56 PM | #12 | |
Account Suspended
Drives: Busted Join Date: Jun 2013
Location: Home
Posts: 104
|
Quote:
|
|
|
|
|
|