Magnuson 2300 Going on Next week

[RPM Motors]

stay tuned -we will be doing a 2300 TVS early next week -

we'll post some pics of the install, dyno sessions and do a short write-up. We have several 2300's on 'vettes but this will be the first Camaro!

[2010SSRSM6]

Lots of pic's of the install please! Is this a members car?

[Legend]

Looking at your site you guys must be new to the business?

Good luck with your build and can't wait to see another 2300 installed on a Camaro!

[henri26900]

Originally Posted by RPM Motors

stay tuned -we will be doing a 2300 TVS early next week -

we'll post some pics of the install, dyno sessions and do a short write-up. We have several 2300's on 'vettes but this will be the first Camaro!

Rksport has a SEMA Camaro...if you want to do another install, let us know
800-214-8030, were in Murrieta.

[RPM Motors]

Originally Posted by Legend

Looking at your site you guys must be new to the business?

Good luck with your build and can't wait to see another 2300 installed on a Camaro!

The Website is definitely under construction but to better answer the question - no we are not new to this - in fact, we've been around much longer than most of the shops and we have over thirty years of experience in building race engines, race cars and modding up our beloved street cars.

You may not have seen us though, as in the beginning of the LTx /LSx / OBDII era we mainly did tuning but as installs became more involved and the results of those installs more affected the ability to tune properly and tune in a timelly manner, it became clear that we needed make the leap into quality installation as well. Our staff are all ASE certified pro's and we guarantee what we do.


We are close to the valleys and I urge anyone to stop by and tour the facilities - over 6,000 Sq Ft comprising a one stop performance shop.

Here's a smapling of our abilities...

* Complete Automotive Machine Shop - all work done on site
* CNC cylinder porting and Flow Development
* Chassis Dyno
* Engine Dyno
* Chassis work - corner balancing - alignments
* 8 bays of installation

[RPM Motors]

Here's a teaser graph of the TVS on an LS2 - well over 600 at the flywheel ....any guesses on the 6.2's final numbers?

[Legend]

@6.5 psi I'd guess about 578hp and 515tq...flywheel you are over 600 easily!

[SILVER BULLITT]

this shop hands down is the best aroundand when i say around i mean like not miles but states aroundthese guys are the most professional shop ive ever been too . charlie keith and his staff are like information highways , these guys were building cars before i was born but im sure you all get it ... we will post up pics and dyno graphs of my camaro 2010 soon we are going n/a shooting between 550 and 600 at the wheels thanks to all over at rpm for being such great people and for caring about our cars and not a quick buck

[2010SSRSM6]

[RPM Motors]

Parts are in and disassembly starts Friday - looking to finish it up and have it on the rollers Tuesday or Wednesday - everyone is invited to check out the build, watch the dyno runs and look over the shop!