Alignment Specs - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Arrond · 07-19-2013, 08:03 AM

Did some searching but couldn't find anything specific. I am looking for good alignment specs for autocross that won't be too aggressive for the street. The car is a garage queen and only sees the road maybe once a week so I am not worried too much about tire wear. Any and all suggestions appreciated.

PAUL SS · 07-19-2013, 08:12 AM

I had my SS alignment done for autocross/street after a one inch drop. Here the numbers:
Front
Camber, -1.02
Caster, 6.4
Toe, 0.10

Rear
Camber, -0.55
Toe, 0.10
Total Toe, 0.20
Thrust Angle, 0.00

I hope that helps.

07-19-2013, 08:03 AM	#1
Arrond Drives: 2013 Camaro 1SS/RS/1LE/NPP Join Date: Apr 2013 Location: Georgetown, Kentucky Posts: 50 View My Garage	Alignment Specs Did some searching but couldn't find anything specific. I am looking for good alignment specs for autocross that won't be too aggressive for the street. The car is a garage queen and only sees the road maybe once a week so I am not worried too much about tire wear. Any and all suggestions appreciated.

07-19-2013, 08:12 AM	#2
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	I had my SS alignment done for autocross/street after a one inch drop. Here the numbers: Front Camber, -1.02 Caster, 6.4 Toe, 0.10 Rear Camber, -0.55 Toe, 0.10 Total Toe, 0.20 Thrust Angle, 0.00 I hope that helps. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein