10-20-2013, 08:55 AM | #1 |
Drives: 2013 2LS BLK Join Date: Oct 2013
Location: North Alabama
Posts: 1,444
|
Pillar gauge pod question
I know this is probably extremely simplistic for some, but my mechanical experience is limited. I am looking into getting a double or triple gauge pod in my 2013 2ls. What gauges do I need to use in them? How hard would I be to wire them to get the correct readings? And how much would it cost total?
__________________
|
10-20-2013, 11:08 AM | #2 |
Master Amateur Mechanic
Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013
Location: South Barrington, IL
Posts: 1,720
|
each gauge can be 150$.. and which kind of gauge you put in there is up to you.. oil temp, pressure maybe.. another RPM. As for installing it, I have no clue, when I get one I'll let the shop do it.
|
10-20-2013, 11:14 AM | #3 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Why do the gauges? It will cost you about 500 dollars for everything and you don't have any mods that warrant getting gauges. If you really want gauges you could just do one and do the areoforce interceptor. It will monitor all your parameters on a single gauge
|
10-20-2013, 11:15 AM | #4 |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
maybe something like DashDaq could be an alternative
__________________
|
10-20-2013, 11:28 AM | #5 |
|
Or the Ultra Gauge plugs into your OBD port you can look at 6 gauges set to what you want to see.
|
10-20-2013, 11:31 AM | #6 |
|
Also checks and clears a CEL
|
10-20-2013, 11:46 AM | #7 |
Drives: 2013 2LS BLK Join Date: Oct 2013
Location: North Alabama
Posts: 1,444
|
sounds interesting.....
__________________
|
10-20-2013, 11:47 AM | #8 |
Drives: 2013 2LS BLK Join Date: Oct 2013
Location: North Alabama
Posts: 1,444
|
where could i find this?
__________________
|
10-20-2013, 12:54 PM | #9 |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
__________________
|
10-20-2013, 01:18 PM | #10 |
Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
I'm looking for a single gauge pillar mount for an A/F gauge.
or a good spot to mount one somewhere. 2SS/RS any ideas?
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
10-20-2013, 01:26 PM | #11 |
Drives: 2010 2SS/RS M6 Join Date: Aug 2013
Location: New Orleans, La
Posts: 436
|
I'd buy aeroforce interceptor gauges.. $$ but they're nice!
|
10-20-2013, 06:05 PM | #12 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
That's what I'm running, love'em! I've got them in my Camaro SS and my Silverado SS. They monitor about everything and plug directly in.
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
10-20-2013, 06:34 PM | #13 |
|
Single amount over the steering wheel, can't recall who sells them
|
10-20-2013, 06:45 PM | #14 | |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
Quote:
I have one for my boost gauge, great visibility and looks factory
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
|
|
|
Tags |
double, gauge, pod, triple, wiring |
|
|