08-18-2015, 04:08 PM | #1 |
Drives: 2013 camaro Join Date: Mar 2013
Location: Colorado
Posts: 607
|
ZL1 style spoiler third break light wiring
Hello guys
Just recently purchased the ZL1 style spoiler from eBay and I was wondering if anyone has purchased this setup and if they did, how did they wire the third brake light? I know offer sells a harness for the third light but from this pic, would I splice into his harness? If so how? Or if there is another way I'm open for suggestions Thanks |
08-18-2015, 05:29 PM | #2 |
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
What I need to know is how to get to the package shelf third brake light wiring in order to tap in. Removing the rear package tray looks like a total pain in the rear to me.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
08-18-2015, 05:33 PM | #3 |
Drives: 2013 camaro Join Date: Mar 2013
Location: Colorado
Posts: 607
|
Yes this too
QUOTE=BluePhoenix;8593179]What I need to know is how to get to the package shelf third brake light wiring in order to tap in. Removing the rear package tray looks like a total pain in the rear to me.[/QUOTE] |
08-19-2015, 04:46 AM | #4 |
Drives: 2010 SS Join Date: May 2014
Location: Maryland
Posts: 418
|
There is a connector for the third brake light behind the rear seat on the passenger side. You'll have to pull the plastic back and when you do you'll see the connector. I didn't use the harness, I used some quick splice connectors that I got at auto zone. They look like this: http://www.autozone.com/ignition/ele...estid=17601658
Last edited by AllBlackSS; 08-19-2015 at 06:32 AM. |
|
|
|
|