02-17-2015, 08:43 PM | #1 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
Drag Pack for the Z/28
I sold my ZL1 and bought a Z/28. I had bought a full set of weld rts wheels for the ZL1 skinny's for the front and M&H drag radials for the rear. They are 17 inch wheels,Will these fit on the Z/28?
|
02-18-2015, 05:22 AM | #2 |
Drives: 2013 silver ZL1 Join Date: Apr 2013
Location: colorado springs co
Posts: 226
|
I wouldn't think so.. Those rotors are massive.
__________________
2015 Z28 Black #16 600rwhp N/A
Colorado speed and performance build: hand ported heads, titanium valves, hand ported throttle body,fast lsxr intake, custom cut lunati cam, lunati push rods, fm high performance lifters, dual beehive springs + titanium retainers, trunnions upgrade, ARH headers + x pipe, fast fuel rails, c5r timing chain, katech high volume oil pump, ati underdrive pulley, Taylor wires. Sold---2013 ZL1 M6 Silver Ice Metallic: 767 rwhp |
02-18-2015, 05:39 AM | #3 |
Jumanji
Drives: '14 Z/28 - AGM - No A/C Join Date: Mar 2014
Location: Alaska
Posts: 1,688
|
No they wont.
|
02-18-2015, 11:13 AM | #4 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
Is this a fact and confirmed? Has anyone tried to bolt on a Weld RTS?
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
02-18-2015, 12:20 PM | #5 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
From what my buddy mentioned you can only fit the 18" RTS on the Z/28
__________________
|
02-18-2015, 03:58 PM | #6 |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Is there any reason you don't jack up the car and test fit it if you already have them?
__________________
|
02-18-2015, 04:52 PM | #7 |
Drives: 2015 Z/28, 1968 Pro-touring Camaro Join Date: Jan 2015
Location: Austin
Posts: 44
|
With 15.5" rotors on the front and 15" rotors on the back, I wouldn't thing they would fit at all. I have 13" Rotors with 6 pot calipers one of my other cars, and 17" barely clear those!
|
02-18-2015, 06:40 PM | #8 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
If the weather permits saturday when I am off work I will see if they fit or not. The weather man says we are going to have ice here but they said that last week and we did not get squat. I will let you all know as soon as I can get the car to my shop as it is here at home.
|
02-18-2015, 07:37 PM | #9 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Good luck and let us know id like to know also
__________________
|
02-18-2015, 09:48 PM | #10 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
Just to put this out there,I have had my PM box blow up with you guys wanting to buy my weld wheels and tires. I have ordered another ZL1 and they will be used for it. So they are NOT FOR SALE. Thanks for asking guys.
|
03-09-2015, 10:57 PM | #11 |
So you keeping the Z/28, or you going exclusively back to the Z/L1 ?
__________________
JRE 750 HP package
Rag Top Rob |
|
|
|
|
|