12-07-2014, 01:22 PM | #1 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
Did a couple of interior mods today
Since I'm done with performance mods for the year and car is officially in storage I decided to do a couple of easy interior mods. Sorry for the large pics.
- First up was the shifter console plate which I somehow scratched over time. Anyway, I wrapped it in 4D carbon fiber wrap I picked up on ebay. It's the same wrapped I used on the STB and it's looks much nicer than the popular 3M wrap. It's also more durable and easier to install. I know this isn't for everyone, but I like it and feel it complements the black interior very nicely. - Second was footwell lighting. The interior lighting on this car is pretty dim imo and I wanted something to help brighten it and match the aqua lights on the dash and door panels. Enter the sjm auto footwell lighting kit. Super easy to install and once again I feel it complements the interior nicely without looking gaudy. They're bright enough to help, but not too bright. I kept it simple and wired it to the dome light. Pics |
12-07-2014, 01:26 PM | #2 |
|
Looks good. The footwell lighting is a must.
__________________
|
12-07-2014, 01:28 PM | #3 |
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Looks good dude. Pics of the STB? What brand is the wrap?
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
12-07-2014, 01:39 PM | #4 |
Drives: '16 2SS Join Date: Apr 2011
Location: Chicago Suburbs
Posts: 2,271
|
Looks great!
|
12-07-2014, 01:44 PM | #5 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
The bezel looks good. My only problem with it is it's the only part wrapped in your interior. Silver on your wheel maybe too??
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
12-07-2014, 01:48 PM | #6 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
Thanks. It's been on the STB since June and hasn't peeled off unlike the 3M stuff. Don't know the brand found it on ebay cheap and decided it try. I was pleasantly surprised how much nicer it is.
http://www.ebay.com/itm/12-X-60-CARB...1d4b3d&vxp=mtr STB |
12-07-2014, 01:49 PM | #7 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
|
12-07-2014, 04:17 PM | #8 |
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Right on. I see you run without the engine cover. I prefer that look as well.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
12-07-2014, 04:36 PM | #9 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
|
12-07-2014, 04:37 PM | #10 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
|
12-07-2014, 04:43 PM | #11 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Looks slick!
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
12-07-2014, 04:50 PM | #12 |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Steering wheels looks great ... Wish I had the patience and skills
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
12-07-2014, 04:57 PM | #13 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
How hard was the steering wheel to do?
Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
12-07-2014, 05:06 PM | #14 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
Not hard at all, just takes time and patience. The silver part is actually 3 pieces; left, right and the center piece with the ZL1 logo (the little mesh screen also pops off). I didn't completely remove the left and right pieces. I lifted them enough for better access. I did the middle piece separately and then snapped it back in place.
|
|
|
|
|