Anywhere Local to Install Skip Shift Eliminator? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

merlin803 · 03-08-2014, 08:21 PM

Has anyone in lower eastern MI found a place to install a skip shift eliminator?

1KillerSS · 03-08-2014, 08:38 PM

any shop can do it it. all you do is raise the car and pull the plug and install the new one and your done!

if you have a two jack stands and a jack you can do it in no time

merlin803 · 03-08-2014, 08:48 PM

Quote:

Originally Posted by 1KillerSS

any shop can do it it. all you do is raise the car and pull the plug and install the new one and your done!

if you have a two jack stands and a jack you can do it in no time

No jack stands but I could just check a couple of local shops I suppose, thanks.

skipinminn · 03-11-2014, 03:25 PM

MY DEALER installed mine

Along with my Hurst short throw shifter

Dropspeed · 03-14-2014, 08:39 AM

Where are you located.....I may be willing to help on a weekend. It is super easy.

-Matt

merlin803 · 03-14-2014, 05:32 PM

Quote:

Originally Posted by Dropspeed

Where are you located.....I may be willing to help on a weekend. It is super easy.

-Matt

I live in Livonia. It probably wouldn't be hard to install, I just don't have ramps or jack stands.

Dropspeed · 03-15-2014, 01:37 PM

Quote:

Originally Posted by merlin803

I live in Livonia. It probably wouldn't be hard to install, I just don't have ramps or jack stands.

I am in Royal Oak...I have everything in my garage...but it will take longer for the car to cool off than to install the part.

Do you already have the part?

camguynj · 03-15-2014, 03:15 PM

If you don't want your dealer to do it or they won't, go to a trans shop. 10mins & $25 is what it cost me.

merlin803 · 03-15-2014, 08:26 PM

Quote:

Originally Posted by Dropspeed

I am in Royal Oak...I have everything in my garage...but it will take longer for the car to cool off than to install the part.

Do you already have the part?

No, I have not ordered one yet. I appreciate the offer but with the drive out there, I may just call up my dealership to see if they would do it.

merlin803 · 03-15-2014, 08:27 PM

Quote:

Originally Posted by camguynj

If you don't want your dealer to do it or they won't, go to a trans shop. 10mins & $25 is what it cost me.

Good idea. Thanks

Craig B · 03-15-2014, 09:12 PM

Quote:

Originally Posted by merlin803

I live in Livonia. It probably wouldn't be hard to install, I just don't have ramps or jack stands.

It would not be a bad investment to buy a set of Jack stands. You will get good use out of them. Just a thought.

03-08-2014, 08:21 PM	#1
merlin803 Drives: 2016 Summit White Camaro 2SS Join Date: May 2009 Location: SE Michigan Posts: 759 View My Garage	Anywhere Local to Install Skip Shift Eliminator? Has anyone in lower eastern MI found a place to install a skip shift eliminator?

03-08-2014, 08:38 PM	#2
1KillerSS Too much is never enough! Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014 Location: Toledo,OH Posts: 4,149 View My Garage	any shop can do it it. all you do is raise the car and pull the plug and install the new one and your done! if you have a two jack stands and a jack you can do it in no time __________________ AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq *Build thread* http://www.camaro5.com/forums/showth...55#post8107855

03-14-2014, 08:39 AM	#5
Dropspeed 2013 Camaro SS1LECTSVZ28 Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012 Location: Suburbs of Detroit, MI Posts: 2,440	Where are you located.....I may be willing to help on a weekend. It is super easy. -Matt __________________ My 1LE Build/Journal : http://www.camaro5.com/forums/showthread.php?t=351990

03-11-2014, 03:25 PM	#4
skipinminn Chiquita Drives: 2013 1LE/1SS YELLO1LE 1 of Only 28 Join Date: Nov 2011 Location: Mpls. Mn./Hudson,Wi. Posts: 4,740 View My Garage	MY DEALER installed mine Along with my Hurst short throw shifter

03-15-2014, 03:15 PM	#8
camguynj Drives: '13 SS/RS LS3 BRM Cammed NPP Join Date: Jan 2013 Location: NJ Posts: 3,812 View My Garage	If you don't want your dealer to do it or they won't, go to a trans shop. 10mins & $25 is what it cost me.