Just ordered a FARK harness. WHICH AMP? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Steve@Subthump · 07-17-2012, 11:17 AM

Quote:

Originally Posted by kiteman

okay so it isn't discontinued, i was typing in the name wrong

http://www.sonicelectronix.com/item_...er-P900.4.html

true, though one could always flip it upside down if terminals were on the other side.

I see it has been out of stock everywhere for months.

Found this tidbit online

What’s going on with the P900.4 Backorder?
As of 3-27-2012, the official word from Precision Power is the P900.4 is out of stock and they are waiting on the factory. The factory has not given Precision Power a date to expect the next batch of P900.4 amplifiers to be shipped

Casper45th · 07-17-2012, 11:49 AM

So Steve, how you fixed for the Fark harness? I know you had to make some changes to the sub box for MY 2012, but has wiring changed any? I haven't researched that yet since my focus has been on "go fast" goodies and lighting.

Steve@Subthump · 07-17-2012, 12:07 PM

the wiring is all the same as far as I know.

Casper45th · 07-17-2012, 01:10 PM

Quote:

Originally Posted by Steve@********

the wiring is all the same as far as I know.

Sweet! I'll get one ordered, but still need to decide on an amp, etc. Thanks Steve.

BlackedOutCamaroSS · 07-19-2012, 07:55 PM

For those that have installed the JL audio HD900/5, did you install an equalizer or sound processor between the factory BA headunit and the JL amp? Or do your run signal right from the FARK to the JL amp?

Storm T · 07-19-2012, 08:27 PM

I haven't installed one yet. Mine sounds so good now and I've been so busy that I haven't had time. I'll be doing the MS8 one of these days.

BlackedOutCamaroSS · 07-19-2012, 09:06 PM

Was looking at the cleansweep or MS8...just wondering if they are worth the extra $ above just replacing amp, speakers, sub.

Chiefs Fan · 07-22-2012, 08:35 PM

Quote:

Originally Posted by BlackedOutCamaroSS

For those that have installed the JL audio HD900/5, did you install an equalizer or sound processor between the factory BA headunit and the JL amp? Or do your run signal right from the FARK to the JL amp?

Using your own head unit, you run the FARK right in and out of the Amp. No equalizer or sound processor. The extra output channel on that amp powers your sub. You will also have to run a heavy gauge wire and fuse for power to your amp from your battery and you need a good ground. Assuming this is the same FARK issued in early 2012 for the Vert. Steve (********) was very helpful with everything. I purchased that amp new on EBAY for around $500 and I have had no problems.

Wuiquen · 07-28-2012, 10:44 AM

oh ok.. cool...

Yes, This is what I do for the country and everyone else.. Thank you for bringing it up.. I hope your son is always safe.

Quote:

Originally Posted by Casper45th

No, if I understand what Steve has done here is instead of using 2 channels to power each rear, (1 for bass, 1 for tweeter), he is using one channel for each rear and filtering out the bass for the tweeter driver in the speaker.

Just as a side note, I want to thank you for your service to our country! That rocks!

I know, you're just doing your job..that's what my Ranger son always tell me..just doin' my job dad.

Casper45th · 08-13-2012, 12:53 PM

Big thanks to Steve and ******** for getting my order shipped quickly and for quick replies on emails!
Now if I would just learn to slow down and read what's in the kit instead of just glancing at the pics, lol. Still need the T-harness (5G-X3 RCA), which I'll be ordering as soon as they are back in stock.

07-17-2012, 11:49 AM	#30
Casper45th Drives: 2012 45th SSRS A6 Join Date: May 2012 Location: Casper, WY Posts: 175	So Steve, how you fixed for the Fark harness? I know you had to make some changes to the sub box for MY 2012, but has wiring changed any? I haven't researched that yet since my focus has been on "go fast" goodies and lighting.

07-17-2012, 12:07 PM	#31
Steve@Subthump Account Suspended Drives: 2011 2SS IOM Vert Join Date: Aug 2009 Location: Indiana Posts: 1,096	the wiring is all the same as far as I know.

07-19-2012, 07:55 PM	#33
BlackedOutCamaroSS Drives: 2010 Camaro SS/RS Join Date: Jul 2009 Location: Stillwater Posts: 13	For those that have installed the JL audio HD900/5, did you install an equalizer or sound processor between the factory BA headunit and the JL amp? Or do your run signal right from the FARK to the JL amp?

07-19-2012, 08:27 PM	#34
Storm T Can't slow down Drives: 2013 SS Dusk Edition (Insain Bolt) Join Date: Apr 2012 Location: Oklahoma Posts: 326	I haven't installed one yet. Mine sounds so good now and I've been so busy that I haven't had time. I'll be doing the MS8 one of these days.

07-19-2012, 09:06 PM	#35
BlackedOutCamaroSS Drives: 2010 Camaro SS/RS Join Date: Jul 2009 Location: Stillwater Posts: 13	Was looking at the cleansweep or MS8...just wondering if they are worth the extra $ above just replacing amp, speakers, sub.

08-13-2012, 12:53 PM	#38
Casper45th Drives: 2012 45th SSRS A6 Join Date: May 2012 Location: Casper, WY Posts: 175	Big thanks to Steve and ******** for getting my order shipped quickly and for quick replies on emails! Now if I would just learn to slow down and read what's in the kit instead of just glancing at the pics, lol. Still need the T-harness (5G-X3 RCA), which I'll be ordering as soon as they are back in stock.