Looking for Picture of cut open V6 Muffler - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Can't_C_Me · 04-11-2013, 05:47 PM

Sounds good. Cant wait for the sound this makes. Wonder if it will cause more drone from removing the dampener. This will help also she'd some of the 25lbs these things weigh lol.

Sent from my Samsung Galaxy S III

Belam · 04-15-2013, 05:36 PM

Quote:

Originally Posted by dkdariusz885

Hey guys. Next week, I am doing an exhaust mod for the V6 muffler. It will be cut open form the top, and have all the inner stuffing removed. I'm not sure yet if the pipes will be connected or not, but at least the inner dampening material will be removed.

I did a similar mod for my 2012 E92 M3, and it sounded awesome. AutoCoutore Motoring in Fair Lawn NJ will do the mod for me, they worked on all my cars. I will post pics and vids. The mod is cheap, and if it sounds great, could be a great way to go. Will letcha all know.

-Dave

P.S. I will also be doing the secondary cat delete at the same time, just to free up a little restriction without needing to tune and such.

dkdariusz885 · 04-15-2013, 09:49 PM

Hey, so the secondary cat delete and muffler mod are happening in the morning. I will have a video and pics if any up hopefully by tomorrow night if anyone is interested. I'm hoping to get an exhaust note as close to similar to the Borla or MRT 2.0 exhaust since they are free flowing systems too. We'll see soon!

-Dave

dkdariusz885 · 04-16-2013, 09:38 PM

As promised, videos are below. More videos after Cold Air Inductions CAI install to come later.

dkdariusz885 · 04-16-2013, 09:51 PM

http://www.camaro5.com/forums/showthread.php?t=289821

SierraDan · 10-19-2015, 05:18 PM

Bump

I know this is an old thread, but I was wondering if anyone has a bone stock V6 exhaust, only with all that packing removed from the mufflers. I like the way the stock exhaust sounds, I like quiet with a V6 but I'd like to know how it would sound without the packing. I can't imagine it'd be much louder, or has much more drone, if any. I figure it'd just have a slightly louder volume outside the car but still be silent inside the car.

A friend of mine has a '12 V6 auto and it has a good sound for stock, but not quite enough volume from the outside when he take off. My brother has a '12 Mustang V6 Performance Package, it has a beefier sound to it. I think the Camaro could be just as loud without that mass of packing. So if anyone has done this, I'd like to know what you think and a video would be awesome.

04-11-2013, 05:47 PM	#43
Can't_C_Me Don't Sleep on My V6 Drives: 2016 C7 1LT Join Date: Dec 2010 Location: Oxford, GA Posts: 3,596 View My Garage	Sounds good. Cant wait for the sound this makes. Wonder if it will cause more drone from removing the dampener. This will help also she'd some of the 25lbs these things weigh lol. Sent from my Samsung Galaxy S III __________________

04-15-2013, 09:49 PM	#45
dkdariusz885 Drives: 2013 Camaro 2LT RS, Convertible. Join Date: Feb 2012 Location: NJ, USA Posts: 53 View My Garage	4/16/13 ACM Mod Date. Hey, so the secondary cat delete and muffler mod are happening in the morning. I will have a video and pics if any up hopefully by tomorrow night if anyone is interested. I'm hoping to get an exhaust note as close to similar to the Borla or MRT 2.0 exhaust since they are free flowing systems too. We'll see soon! -Dave

04-16-2013, 09:51 PM	#47
dkdariusz885 Drives: 2013 Camaro 2LT RS, Convertible. Join Date: Feb 2012 Location: NJ, USA Posts: 53 View My Garage	New thread link for Camaro V6 ACM Exhaust Mod http://www.camaro5.com/forums/showthread.php?t=289821

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	611	07-01-2020 08:49 AM
DIY: GFX Outlets add Wire Mesh and Paint, Muffler Delete	Li0nel1234	Camaro DIY & HOW-TO instructions & discussions	25	01-07-2017 07:36 PM
DIY at home Muffler Delete for $20	CDBiker220	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	10-12-2009 06:32 PM
ok i just bought a 2010 v6 camaro and i was wondering what muffler to put on it	ponykiller	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	14	09-18-2009 08:53 PM
Jim's 66 Muffler shop in Albuquerque	CamaroGrrl	USA - Southwest	6	08-15-2009 08:47 AM

10-19-2015, 05:18 PM	#48
SierraDan Drives: 95 GMC Sierra Join Date: Oct 2015 Location: Olathe Posts: 1	Bump I know this is an old thread, but I was wondering if anyone has a bone stock V6 exhaust, only with all that packing removed from the mufflers. I like the way the stock exhaust sounds, I like quiet with a V6 but I'd like to know how it would sound without the packing. I can't imagine it'd be much louder, or has much more drone, if any. I figure it'd just have a slightly louder volume outside the car but still be silent inside the car. A friend of mine has a '12 V6 auto and it has a good sound for stock, but not quite enough volume from the outside when he take off. My brother has a '12 Mustang V6 Performance Package, it has a beefier sound to it. I think the Camaro could be just as loud without that mass of packing. So if anyone has done this, I'd like to know what you think and a video would be awesome.