The Birth of Brandi's Twins [COTW 8/8/11] - Page 91 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

garcmol · 07-24-2011, 08:46 PM

With the power this car is putting down, I'd want all the 'scaffolding' I could get!

How's the tow back coming?

*SSE 4 2SS* · 07-25-2011, 01:45 AM

Quote:

Originally Posted by blade_ss

nice cage, but according to the guys at Top Gear a proper road car should not have scaffulding in the back.

However you spell it?

those snooty bastards wouldn't know a proper car if it ran over them, but they are welcome to come to the Texas Mile if they wanna see some really fast scaffolding...

Quote:

Originally Posted by garcmol

With the power this car is putting down, I'd want all the 'scaffolding' I could get!

How's the tow back coming?

we are still anchored off Cabo Frio, waiting on boat to offload all the extra crap onto...the schedule say we will leave here on the 29th, but there is no way in he'll that's happening, unless we bring all the crap with us and ship it back from Trinidad or from Brownsville...the norm is to have about three to six months to remove stuff, and we are supposed to manage this in ten days... Yeah right...while in the shipyard in Mobile getting ready to go to Egypt, we had an average of almost 200 welders and fitters on the rig everyday, here we have two rig welders, three service welders and two fitters... we can't even gets boats to offload the riser and drill collars...

*SSE 4 2SS* · 07-25-2011, 01:54 AM

Quote:

Originally Posted by speedster

With all that tubing you could weld it to the top of Brandi and make you own Onshore Oil Rig... You'd feel right at home.

Land rig work sux... Too easy to quit... Start the truck and you're gone, and out here, I can buy the whole rig dinner and it's easy, on land, you could go broke...they feed us out here... But we have to eat what they serve, I've eaten a lot of PB&Js in my offshore career.

garcmol · 07-25-2011, 01:00 PM

We're making progress on the cage

*SSE 4 2SS* · 07-25-2011, 01:05 PM

Quote:

Originally Posted by garcmol

We're making progress on the cage

Holy Crap, if that's mine, someone is in deep deep deep frouble....

I'm not liking the hatchback in my car either... I was partial to the trunk... and if you had to paint the car grey, couldnt you at least wait until the work was done???

garcmol · 07-25-2011, 01:08 PM

No yours is the one you see out the windshield of this car. It was the only picture I had. We added pop up headlights.

You know, I thought until recently you were a fisherman. I was seeing your profile picture with that fish and you were talking about being out on the rig.

Pretty stupid huh?

*SSE 4 2SS* · 07-25-2011, 01:13 PM

Quote:

Originally Posted by garcmol

No yours is the one you see out the windshield of this car. It was the only picture I had. We added pop up headlights.

You know, I thought until recently you were a fisherman. I was seeing your profile picture with that fish and you were talking about being out on the rig.

Pretty stupid huh?

I like to fish, but nope, I'm just a lowly Subsea Engineer... Barely make enough to keep my head above water...

nothing stupid about it, just not as yet informed...

That thing in the background look like a honda or something... if it has two wheels by design, or I can cut grass with it, ok, if not, I'll pass and I want my Camaro back... Pleasethankyouverymuch...

Dr Jkel · 07-25-2011, 01:15 PM

This is all you need....

garcmol · 07-25-2011, 01:16 PM

.....and beer

*SSE 4 2SS* · 07-25-2011, 01:20 PM

Quote:

Originally Posted by garcmol

.....and beer

I'll bring the beer, and a one inch drive impact if needed...a Bama trip sounds like a great time... lotsa good folks there and from there... I was born in Mobile...

Merc · 07-25-2011, 09:55 PM

Quote:

Originally Posted by SSE 4 2SS

Holy Crap, if that's mine, someone is in deep deep deep frouble....

I'm not liking the hatchback in my car either... I was partial to the trunk... and if you had to paint the car grey, couldnt you at least wait until the work was done???

andredmg · 07-26-2011, 06:32 AM

Quote:

Originally Posted by garcmol

We're making progress on the cage

lol, get er done ha ha.

*SSE 4 2SS* · 07-26-2011, 06:34 AM

Quote:

Originally Posted by andredmg

lol, get er done ha ha.

This is just plain wrong... That is all....

garcmol · 07-26-2011, 07:35 AM

I'll stop jacking your thread. You have a REAL build going on here!

07-24-2011, 08:46 PM	#1261
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	With the power this car is putting down, I'd want all the 'scaffolding' I could get! How's the tow back coming? __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

07-25-2011, 01:00 PM	#1264
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	We're making progress on the cage __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

07-25-2011, 01:08 PM	#1266
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	No yours is the one you see out the windshield of this car. It was the only picture I had. We added pop up headlights. You know, I thought until recently you were a fisherman. I was seeing your profile picture with that fish and you were talking about being out on the rig. Pretty stupid huh? __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

07-25-2011, 01:15 PM	#1268
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	This is all you need.... Attached Images

07-25-2011, 01:16 PM	#1269
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	.....and beer __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

07-26-2011, 07:35 AM	#1274
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	I'll stop jacking your thread. You have a REAL build going on here! __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)