*** The Truth About BC Racing Coilovers and Installation Thread *** - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

EncoreCamaros · 03-20-2012, 08:30 AM

Pm please for a set of bc racing coilovers

Treefrog · 03-20-2012, 11:31 AM

Do you have to drill holes in your trunk for these?

I have a ******** box in my driver's side trunk and seems like the box would be in the way of the little adjuster coming through..

Whiteside Customs · 03-20-2012, 12:38 PM

Quote:

Originally Posted by Treefrog

Do you have to drill holes in your trunk for these?

I have a ******** box in my driver's side trunk and seems like the box would be in the way of the little adjuster coming through..

Yes these require holes for the adjusters.

LandonB · 03-21-2012, 11:06 PM

Will these fit a V6?

Treefrog · 03-22-2012, 10:03 AM

Quote:

Originally Posted by Whiteside Customs

Yes these require holes for the adjusters.

Are there any pictures from farther away where these adjusters come thru the carpet? I really think my sub box will be in the way..

There are no other options?

Whiteside Customs · 03-22-2012, 10:49 AM

Quote:

Originally Posted by LandonB

Will these fit a V6?

Yes we have installed these on several v6 cars without an issue.

Whiteside Customs · 03-22-2012, 10:51 AM

Quote:

Originally Posted by Treefrog

Are there any pictures from farther away where these adjusters come thru the carpet? I really think my sub box will be in the way..

There are no other options?

You don't have to run the extenders through the carpet. We have found it's easier to drill a 2" hole and use a desk grommet. This way you can access the adjusters by pulling up the carpet on each side when you need to adjust them. Otherwise the carpet sits flush and you'd never know you had coilovers.

CamaroDreams07 · 03-22-2012, 10:56 AM

Mike- stop bumping these to the top and making me want to spend money I don't have

Whiteside Customs · 03-22-2012, 11:02 AM

Quote:

Originally Posted by CamaroDreams07

Mike- stop bumping these to the top and making me want to spend money I don't have

I just looked into my crystal ball and I see coilovers in your future!

CamaroDreams07 · 03-22-2012, 04:58 PM

Quote:

Originally Posted by Whiteside Customs

I just looked into my crystal ball and I see coilovers in your future!

Haha oh yeah sure. Right there next to the bushings, isolator, ported TB, wheels and supercharger.....

File this one in the "in my dreams" section.

Whiteside Customs · 03-22-2012, 06:42 PM

Quote:

Originally Posted by CamaroDreams07

Haha oh yeah sure. Right there next to the bushings, isolator, ported TB, wheels and supercharger.....

File this one in the "in my dreams" section.

We just need to find one of those trees that money grows on.

AtotheJ · 04-09-2012, 11:34 AM

I just installed the same set. What did you guys do with the dampners in the trunk? did you just leave them dangling there, or did you do something to secure them down. I used a piece of velcro to keep them from bouncing. just curious.

Whiteside Customs · 04-09-2012, 04:59 PM

Quote:

Originally Posted by AtotheJ

I just installed the same set. What did you guys do with the dampners in the trunk? did you just leave them dangling there, or did you do something to secure them down. I used a piece of velcro to keep them from bouncing. just curious.

We don't use the extenders at all. We drill a 2" hole big enough for your fingers to get to the adjust under the carpet. Simply lift the carpet, make the adjustment and go.

Firefighter · 01-10-2014, 10:01 PM

Bump just because this is a pretty good write up, that I had to find with Google...

03-22-2012, 10:56 AM	#78
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	Mike- stop bumping these to the top and making me want to spend money I don't have __________________ [B]

04-09-2012, 11:34 AM	#82
AtotheJ 2010 Camaro 2SS LS3 Drives: 2010 Camaro 2SS LS3 Join Date: Dec 2011 Location: Kingwood, Texas Posts: 164	I just installed the same set. What did you guys do with the dampners in the trunk? did you just leave them dangling there, or did you do something to secure them down. I used a piece of velcro to keep them from bouncing. just curious. __________________ \| TSP Headers \| Magnaflow \| CAI \| LMR Tune \| BC Racing \| Pfadt Sways \|

01-10-2014, 10:01 PM	#84
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	Bump just because this is a pretty good write up, that I had to find with Google... __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BC Racing Coilovers 2010 Camaro Ultimate Performance \| Ship Same Day\| Best Price GTD!	AutoAgenda	Suspension / Chassis / Brakes	220	01-04-2016 12:19 AM
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
BC Racing BR Type Coilovers Now Available for the 2010+ Camaro! Height+Dampening Adj.	AJ@ECSMotorsports	Suspension / Chassis / Brakes	73	11-13-2010 03:52 PM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 08:02 PM
BC Racing coilovers Installed	Saving41	Suspension / Brakes / Chassis	6	03-06-2010 10:51 PM

03-20-2012, 08:30 AM	#71
EncoreCamaros Drives: 2010 Victory Red Camaro SS/RS LS3 Join Date: Oct 2010 Location: Long Island Posts: 166	Pm please for a set of bc racing coilovers

03-20-2012, 11:31 AM	#72
Treefrog U235 is fun! Drives: CGM 2SS/M6 Join Date: Apr 2009 Location: Florence, AL Posts: 403	Do you have to drill holes in your trunk for these? I have a ******** box in my driver's side trunk and seems like the box would be in the way of the little adjuster coming through..

03-21-2012, 11:06 PM	#74
LandonB Drives: 2011 Camaro LS M6 Join Date: Sep 2011 Location: Oklahoma Posts: 157	Will these fit a V6?