Boost gauge for TVS 2300??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jrpxxii · 08-13-2009, 02:12 PM

Are any of you running a boost gauge with maggie? If so what type and where did you mount it? I saw Hennessey mounted one on steering column and it looks good and clean. Installing mine and wanted input on gauge.

rharon · 08-13-2009, 09:57 PM

bump

ADM PERFORMANCE · 08-14-2009, 07:17 AM

Quote:

Originally Posted by jrpxxii

Are any of you running a boost gauge with maggie? If so what type and where did you mount it? I saw Hennessey mounted one on steering column and it looks good and clean. Installing mine and wanted input on gauge.

Here ya go-
Can do boost and wideband inputs ++++

http://www.camaro5.com/forums/showth...ight=aeroforce

Crowley · 08-14-2009, 08:05 AM

I'd like to see if someone could come up with something like I did in my 04 cobra. I replaced the gauge cluster trim with trim that had to pods on the far bottom ends. It looked really good and worked out great

I too wouldn't mind adding a wideband and boost gauge to the car ...

EDIT::

Sort of like this (but looked much better):

Crowley

Speed74SS · 08-14-2009, 10:05 AM

I'm waiting for someone to come out with a boost gauge that would fit in the 4 pack gauge cluster.

SoloSK71 · 08-14-2009, 10:37 AM

Still not seeing the point of ANY gauge related to performance that you have to take your eyes off the road to see.

- SK

Kyle2k · 08-14-2009, 10:37 AM

Quote:

Originally Posted by Speed74SS

I'm waiting for someone to come out with a boost gauge that would fit in the 4 pack gauge cluster.

As am I- that would be outstanding!

Crowley · 08-14-2009, 11:23 AM

Quote:

Originally Posted by SoloSK71

Still not seeing the point of ANY gauge related to performance that you have to take your eyes off the road to see.

- SK

Vacuum / Boost gauge is a definate plus for any system, expecial an F/I application .. You don't really have to be going fast to see issues with this gauge.

Crowley

08-13-2009, 02:12 PM	#1
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	Boost gauge for TVS 2300??? Are any of you running a boost gauge with maggie? If so what type and where did you mount it? I saw Hennessey mounted one on steering column and it looks good and clean. Installing mine and wanted input on gauge.

08-13-2009, 09:57 PM	#2
rharon Drives: 2010 Yellow 2SS/RS Join Date: Jun 2009 Location: Fresno / Clovis , CA Posts: 328 View My Garage	bump __________________ Magnacharger TVS2300, ARH HEADERS, ROTO-FAB CAI, NOWEEDS.NET DIVERTERS

08-14-2009, 08:05 AM	#4
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	I'd like to see if someone could come up with something like I did in my 04 cobra. I replaced the gauge cluster trim with trim that had to pods on the far bottom ends. It looked really good and worked out great I too wouldn't mind adding a wideband and boost gauge to the car ... EDIT:: Sort of like this (but looked much better): Crowley __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Center console different with gauge pack vs. no gauge pack?	CasopoliS	Cosmetics and Lighting Modification Discussions	28	10-13-2010 10:14 AM
New item - Auto Meter ecometer fuel mileage gauge - plug and play @ PFYC.com	Redshift	Audio / Visual / Electronics/ Gauges / Nav	0	07-01-2009 08:56 AM
SECOND GEN WATER TEMP GAUGE INACCURATE	79ZRAG	1st & 2nd Generation Camaros	9	05-30-2009 05:13 PM
Boost Gauge	ZZcamaro	Cosmetics and Lighting Modification Discussions	10	10-18-2008 07:34 AM
High Compression Ratio + Boost = Uh Oh	AirGoya	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	50	09-21-2008 08:55 PM

08-14-2009, 10:05 AM	#5
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	I'm waiting for someone to come out with a boost gauge that would fit in the 4 pack gauge cluster.