You are browsing camaro5 
 |
|
07-02-2013, 06:04 PM
|
#1 |
 
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Cam change ??
I'm going to be doing a cam change soon on my 1LE. Are there any special tools needed? I have an LS balance installer and puller. I also just ordered a LS on head valve spring removal tool. What other LS tools needed? Thanks.
|
|
|
|
07-02-2013, 08:21 PM
|
#2 |
   
|
Might want a degree wheel, dial indicator and a push rod length checker unless your going to trust the cam manufacturer to get it right. They usually do, but S*%# happens.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
 |
|
|
|
|
07-02-2013, 09:03 PM
|
#3 |
|
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
I can get the degree wheel and dial indicator from my neighbor. I bought a kit that comes with new pushrods, timing chain [3 bolt] Comp Cams Trunion Upgrade Kit, oil pump and gaskets.
|
|
|
|
|
07-02-2013, 11:37 PM
|
#4 |
|
|
Sounds like you have thought this out. The cam kit probably has the right pushrods, but I would still verify the length you need.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
|
|
|
|
|
|
|
 |
|
|
