11-10-2013, 05:49 PM | #1 |
Drives: 2021 Camaro 2LT Join Date: Oct 2013
Location: Mesquite, Nv.
Posts: 490
|
1LE strut & shock P/Ns not listed on GM!
As I want to buy just struts, shocks & rear shock mounts, I check on
GM parts site and got a big zero! 22812982/3 struts, 22981391 r shocks and 22922445/6 rear shock mounts. Maybe they won't separate the track kit? For my 2014 SS that I don't want to lower but like the monotubes. Already have the ZL1 sway bars on the way from Parts Taxi. I have a staggered wheel/tire setup, and I want to use my stock springs which are the same as the 1LE. Last edited by chuckclanton; 11-10-2013 at 05:59 PM. |
11-10-2013, 10:52 PM | #2 |
ITCRNRS
Drives: 2018 ZL1 1LE Join Date: Jun 2012
Location: Wichita KS
Posts: 1,575
|
Your dealer should be able to order them if nothing else.
__________________
2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter
SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap |
11-11-2013, 12:18 AM | #3 |
Drives: '12 2LT Convertible Join Date: Mar 2012
Location: Belmont, California
Posts: 1,701
|
GMPP catalog lists the bill of materials
__________________
Mods: GM Locking Gas Cap, RS License Plate Frame, SS Brembos, ZL1 FrontEnd, 14/15 Convertible Top
|
11-11-2013, 06:12 AM | #4 |
Drives: 2012 IBM 2SS Vert. Join Date: Dec 2011
Location: Tequesta, Fl.
Posts: 784
|
This should help.
Sftshldr Beast Rider Drives: 2013 Blk/Blk 1SS Auto Join Date: Feb 2013 Location: Montgomery, AL. Posts: 186 View My Garage iTrader Rating: 0 reviews ZL1 Part Numbers: Strut Tower Brace (LT, SS, 1LE) - 22756880 Wheel Hubs (ZL1, 1LE) (4) - 25954415 Front Coil Spring (SS, 1LE) (2) - 92245257 Front Strut (1LE) (passenger side) - 22812984 Front Strut (1LE) (driver side) - 22812985 Front Sway Bar (1LE) - 22812946 Front Sway End Link (SS, ZL1, 1LE) (passenger side) - 22842515 Front Sway End Link (SS, ZL1, 1LE) (driver side) - 22842516 Rear Shock Mount (ZL1, 1LE) (passenger side upper) - 22836734 Rear Shock Mount (ZL1, 1LE) (driver side upper) - 22836727 Rear Coil Spring (SS, 1LE) (2) - 92195466 Rear Shocks (1LE) (2) - 22812987 Rear Sway Bar (ZL1, 1LE) - 22786260 Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221 Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 car conversion) Rear Toe Link (ZL1, 1LE) (2) - 22845487 3.91 Gears only ( 1LE ) - 22813040 Front Splitter kit ( 1LE ) - 22950575 Wheels 20x10 Black ( ZL1-1LE ) - 22798741 Wheels 20x11 Black ( ZL1-1LE ) - 22798743 2012-13 "Exposed" Hood Insert - 22845156 2013 Ashen Gray Painted Hood Insert - 22959777 Shifter Boot-Suede - 24261464 Shifter Boot-Leather - 24263725 Steering Wheel-Suede - 22813848 Steering Wheel-Leather - 22813852 Rear Spoiler - 22828467 Fog Light-LH/RH - 10335108 Fog Light Bezel-LH - 22895339 Fog Light Bezel-RH - 22895338 Front Lower Fascia/Splitter - 22894223 Front Fascia - 22831868 Wheel Polished Front - 9599037 Wheel Polished Rear - 9599038 Emblem "ZL1" Hood - 22830718 Emblem "ZL1" RR.Deck - 22830719 Fender:RH - 20943622 Fender:LH - 20943621 Liner-Frt Whl Hse-LH - 20952837 Liner-Frt Whl Hse-RH - 20952838 Valance Kit For Front Wheel House-Liners - 22757643 (These are the two wheel liner extensions on the bottom, they come in a kit and dealer must install these as part of the PDI procedure) Extension-Frt Whl Hse-LH - 22895341 Extension-Frt Whl Hse-RH - 22895340 (These are the pieces that "stick-out" of the front of the wheelhouse-liners,also called "guards") Hood - 22824393 ZL1 Grille - 22893907 ZL1 Grille Emblem - 22830717 ZL1 Headlamp Housing - LH-20981021 / RH-20981022 (Same as other "RS" Camaro's) ZL1 Dash Emblem - Dash ZL1 emblem only part of trim piece applique - 22967691 Camaro Emblem - 22752666 (Same as other Camaro's) ZL1 Rear Bumper - 22894196 ZL1 Rear Valence - 22894221 ZL1 Rear Fascia Splash Shields - LH - 22895337 / RH-22895336 ZL1 Exhaust Tips - Not Available Separately- Must Buy Complete"CAT-BACK" SYSTEM - 22874269 ZL1 Exhaust Heat Shields - LH - 20957053 / RH - 20957052 ZL1 Rear Diff Housing - 22860925 (This is an empty housing-NO internals) ZL1 Gears A/M 3.23 / 3.73 - 3.23 - 22835277 / 3.73 - 22835278 (Ring and pinion gears only) ZL1 Complete Differential Asm. w/Internals - 3.23 - 20931134 / 3.73 - 20931133 Front Seat Cover Driver Bottom - 20996226 Front Seat Cover Driver Back - 22795649 Front Seat Cover Passenger Bottom - 20996215 Front Seat Cover Passenger Back - 22795669 Headrests (complete assemblies,no separate covers available) - LH/RH are the same - 20996228 Rear Seat Covers Bottom - 20996254 Rear Seat Covers Back - 20996242
__________________
LS3/M6 K&N, VMAX throttle body, RX Catch Can, skip shift eliminator, DT shorties and Solo HFC, DRL harness and 5K LED DRL, ZL1 rear sway, 1LE front sway
|
03-05-2014, 09:14 PM | #5 |
US Veteran
Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,407
|
Is the rear lower control arm the only part that needs changed if going to the 1LE struts from stock 2011 SS?
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS) |
03-05-2014, 09:53 PM | #6 |
|
i bought the front struts from my job separate from the track pack, so just see your local dealer.
__________________
2010 Camaro 2SS/RS LS3
1093/1066 416, AGP 6262, E85, Cam |
03-09-2014, 12:26 AM | #7 | |
US Veteran
Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,407
|
1LE strut & shock P/Ns not listed on GM!
Quote:
Ok, to make it easier on us that want to change to the 1LE suspension: Can we just buy the struts (front &rear) and throw them on a 2010/2011SS? What EXACTLY is needed for just the basic upgrade (struts, shocks)? I want to put the 1LE struts/shocks on my 2011SS. Forgive me if it sounds like I have no clue, because I don't. Well, some clues, but not enough to figure this out on my own. Obviously. THANKS!
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS) |
|
03-09-2014, 03:10 AM | #8 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
I sent a pm to Maureen and Rodgers on 1LE parts yesterday . They always got good deals and free shipping and handling . Expect to hear summtin on Monday
|
03-09-2014, 08:45 AM | #9 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,545
|
You need shocks to replace shocks. Then an alignment. Thats it.
|
03-10-2014, 02:44 PM | #10 |
US Veteran
Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,407
|
So the front struts are the same and the rear shocks connect the same? These are the 2 things I thought were different.
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS) |
03-10-2014, 04:53 PM | #11 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,545
|
The 1LE has a slightly different bushing in the shock mount but they both mount the same and I noticed zero difference in deflection when I tried them. There is no reason to upgrade the mount, personally I think I wasted my money getting them and I track the piss out of my car. All you need is shocks.
|
03-10-2014, 06:09 PM | #12 | |
US Veteran
Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,407
|
Quote:
You wouldn't happen to have the part numbers would you? Thanks for the help! It's much appreciated!!
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS) |
|
03-10-2014, 06:31 PM | #13 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,545
|
All the part numbers are up above in this thread.
|
|
|
|
|