Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


Reply
 
Thread Tools
Old 12-22-2011, 10:36 AM   #1
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
ZL1 rear bumper

OK guys here is the rear, I do not have prices as i cant post a price if i had it you will need to do that.

New part # for the ZL1 bumper is # 22894196 there is no price as of today and non in stock, and you may need a new absorber too but i dont have a #

Parts you need:
#22894221 Fascia List:$129.76
#22895336 mud flap $33.64
#22895337 mud flap $33.64
#20952863 brackets $16.37
#22743862 brackets $7.58
#20952864 brackets $16.37
#20957052 heat shield $119.77
#20957053 heat shield $119.77
#22743863 brackets $7.58
#22743864 brackets $7.58
#22743865 brackets $7.58

And i say you need this.
#22846710 absorber $118.04

Some members dont think so but i say yes.

Quote:
Jer4251
i wasnt able to install the 2 center bolts on the underside. they didnt line up with the absorber, i had to use some force on the 2 ends but they are installed.
Attached Images
    

Last edited by 2SSRS@Gen5diy; 03-16-2012 at 10:09 AM.
2SSRS@Gen5diy is offline   Reply With Quote
Old 12-22-2011, 11:30 AM   #2
c_LoW29


 
Drives: 2011 2SS/RS, 2010 Mustang GT
Join Date: May 2010
Location: Slidell, LA
Posts: 2,412
so the lower diffusor wont fit on our SS bumper?
c_LoW29 is offline   Reply With Quote
Old 12-22-2011, 11:31 AM   #3
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
i do need a new bumper too...........hmmmm
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 12-22-2011, 11:52 AM   #4
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Quote:
Originally Posted by c_LoW29 View Post
so the lower diffusor wont fit on our SS bumper?
How sad that?

Quote:
Originally Posted by pyr0b0y View Post
i do need a new bumper too...........hmmmm
There the same bumper.
2SSRS@Gen5diy is offline   Reply With Quote
Old 12-22-2011, 11:54 AM   #5
c_LoW29


 
Drives: 2011 2SS/RS, 2010 Mustang GT
Join Date: May 2010
Location: Slidell, LA
Posts: 2,412
So you are saying it does fit our bumper if that is the case I will buy one so I can put it quad tips
c_LoW29 is offline   Reply With Quote
Old 12-22-2011, 12:06 PM   #6
twentytwelvebee
 
twentytwelvebee's Avatar
 
Drives: 2012/2ss "transformers edition"
Join Date: Oct 2011
Location: vacaville
Posts: 528
so looks like we would need #s 10,15,16,17 for the diffuser?
twentytwelvebee is offline   Reply With Quote
Old 12-22-2011, 12:12 PM   #7
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Quote:
Originally Posted by twentytwelvebee View Post
so looks like we would need #s 10,15,16,17 for the diffuser?
there is a lot more then that, you will need # 18,19,20, may be 12,14 too
2SSRS@Gen5diy is offline   Reply With Quote
Old 12-22-2011, 12:14 PM   #8
twentytwelvebee
 
twentytwelvebee's Avatar
 
Drives: 2012/2ss "transformers edition"
Join Date: Oct 2011
Location: vacaville
Posts: 528
cool, thanks for the info!

Quote:
Originally Posted by 2SSRS View Post
there is a lot more then that, you will need # 18,19,20, may be 12,14 too
twentytwelvebee is offline   Reply With Quote
Old 12-22-2011, 12:19 PM   #9
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,574
I'm hoping number 33 for the left and right side are a bolt on to our SS. If they are not too pricey I may get a pair and try. You think any other parts would be needed like #29, 30 and or 31 ??
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
flht99b is offline   Reply With Quote
Old 12-22-2011, 12:26 PM   #10
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Quote:
Originally Posted by flht99b View Post
I'm hoping number 33 for the left and right side are a bolt on to our SS. If they are not too pricey I may get a pair and try. You think any other parts would be needed like #29, 30 and or 31 ??
Ed M.
They do.
2SSRS@Gen5diy is offline   Reply With Quote
Old 12-22-2011, 03:19 PM   #11
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,574
Just checked with my dealer and he wasn't able to bring up any prices for #33 yet but the part numbers did show up so hopefully soon they will be available.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
flht99b is offline   Reply With Quote
Old 12-26-2011, 12:06 AM   #12
Sevn86


 
Sevn86's Avatar
 
Drives: 2010 Camaro 2LT/RS ABM
Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
Originally Posted by baclarsen View Post
Dude, you go through cars faster than I go through underware!!
1000 Initial Order 9/14/2009 - Classic Chevy Sugar Land
1100 Order accepted at dealer: 9/15/2009 - NPGV41.
2000 Order accepted by GM: 9/29/2009
3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09
3100 Sequenced:10/12/09
3300 Scheduled For Production:10/13/09
3400 Broadcast:10/22/09
3800 Produced:10/27/09
4000 Available To Ship:10/28/09
4200 Shipped:10/29/09
5000 Delivered To The Dealer:11/09/09
6000 Delivered To Customer:11/12/09
Sevn86 is offline   Reply With Quote
Old 12-28-2011, 06:29 PM   #13
eclipsen
 
Drives: 2010 Camaro 2SS/RS
Join Date: Sep 2009
Location: Lititz, PA
Posts: 74
What about the rear spoiler? Will that fit a 2010 SS?
__________________
2010 Camaro 2SS/RS, 6M, ADM Race scoop, CAI intake, VMAX TB, Kooks LTs, Solo Mach X, MGW Shifter, Dynotech driveshaft, 1LE 3.91 gears with JRE updates, BMR bushings/Toe/Trailing Arms, Pedders ZL1 sways and XA Coilovers, Heritage Grill, Yenko side stripes, SS emblems, Havoc Rear Spoiler.
eclipsen is offline   Reply With Quote
Old 12-28-2011, 11:24 PM   #14
camaro2lt
 
camaro2lt's Avatar
 
Drives: 2010 Camaro 2LT VR/RS CGM Rally's
Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
Quote:
Originally Posted by eclipsen View Post
What about the rear spoiler? Will that fit a 2010 SS?
yes it will
__________________
camaro2lt is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SS bumper cover installed on my 2LT/RS 01pewterz28 Cosmetics and Lighting Modification Discussions 60 01-15-2015 03:57 PM
Light burned hole in rear bumper HopeRidesAlone Camaro Issues / Problems | Warranty Discussions | TSB and Recalls 1 12-03-2013 08:09 PM
List ZL1 Option Codes OldJedi Camaro ZL1 Forum - ZL1 Specific Topics 103 11-30-2011 07:25 AM
Great Motortrend Article - GM’s Reuss: Camaro ZL1 “Wait is Worth it,” IOMZL1 Camaro ZL1 Forum - ZL1 Specific Topics 21 10-10-2011 02:32 AM
Dent forming in Rear Bumper ambientweather Camaro Convertible Forum 3 08-01-2011 06:44 PM


All times are GMT -5. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.