Brembo Caliper Bolts - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mgizzle · 10-27-2015, 04:47 PM

U dont need to touch those to reseal or replace seals/dust boots. That caliper bolt shouldnt be touched since now you compromise seal between two halfs. I would buy calipers from forum since the base ones are very cheap non painted. Try amazon too.

L6611983 · 03-30-2018, 04:50 PM

Would this be the correct part number for the 4 bolts in the Rear? 11515781
them seem to be different sizes

16mm bracket bolts
Caliper Bolts size and part number?

2011WhiteSS · 03-31-2018, 08:56 AM

Quote:

Originally Posted by L6611983

Would this be the correct part number for the 4 bolts in the Rear? 11515781

them seem to be different sizes

16mm bracket bolts

Caliper Bolts size and part number?

That is the P/N for the rear Brembo caliper mounting bolts.

Sent from my iPhone using Tapatalk

Avalnch · 04-01-2018, 09:51 PM

I'm pretty sure you won't find those reverse torx bolts separate and will have to buy a whole new set of calipers. As another posted stated, shouldn't have separated your calipers for powder coat.

cpole82 · 04-13-2018, 09:09 PM

You will not find this bolt for sale. Through GM, you will actually have to buy a new caliper or find a used one on eBay.

10-27-2015, 04:47 PM	#15
Mgizzle Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012 Location: Detroit Posts: 1,252	U dont need to touch those to reseal or replace seals/dust boots. That caliper bolt shouldnt be touched since now you compromise seal between two halfs. I would buy calipers from forum since the base ones are very cheap non painted. Try amazon too. __________________ I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.

03-30-2018, 04:50 PM	#16
L6611983 Drives: 2010 Camaro 2SS Join Date: Mar 2018 Location: Bakersfield, CA Posts: 320	Bolts Would this be the correct part number for the 4 bolts in the Rear? 11515781 them seem to be different sizes 16mm bracket bolts Caliper Bolts size and part number?

04-01-2018, 09:51 PM	#18
Avalnch Drives: Rally Yellow Camaro+Avalanche Join Date: Dec 2009 Location: Vancouver Posts: 1,110	I'm pretty sure you won't find those reverse torx bolts separate and will have to buy a whole new set of calipers. As another posted stated, shouldn't have separated your calipers for powder coat. __________________ Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter+2012LS3VERT bushing, Quantum Brake Ducts, JDP Tow Hook Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter. Pfadt coilovers, camber plates, trailing arms, Pegasus Solid Subframe. Pedders ZL1 barz, radius arm & steering rack bushings. BMR adjustable toe-rods. Hotchkis Max Chassis Brace. ZL1 GMPP Driveline Upgrade. TurnOne P/S pump. CTS-V 6 pistons. 447 HP @ 6180 RPM / 418 TQ @ 5100 RPM

04-13-2018, 09:09 PM	#19
cpole82 Drives: 2015 Z28 Join Date: Nov 2015 Location: Brighton, mi Posts: 31	You will not find this bolt for sale. Through GM, you will actually have to buy a new caliper or find a used one on eBay.