03-19-2015, 07:55 PM | #1 |
Drives: Camaro Join Date: Feb 2011
Location: NY
Posts: 154
|
Brakes and Rotors
How many miles did you change your stock brakes? and if you did so, was it with the rotors?
I am nearing 75k and need to change out my stock breakpads - heard it was pretty good for stock useage Also any recommendations? I seen STILLEN rotors and brakes are they any good? Thanks Guys |
03-27-2015, 06:19 AM | #2 |
Drives: 2011 LS3 Join Date: Jan 2012
Location: el paso tx
Posts: 547
|
40k replaced front rotors and pads and rear pads only. They were just about gone in the front.
__________________
Vararam
Stainless Works Headers Vmax TB SLP loudmouth 2 Nightfury Cam Mike Norris CC Tuned by Southwest Speed |
03-27-2015, 06:50 AM | #3 | |
MikeNoMaro
Drives: A 2016 Challenger R/T M6 STP Join Date: Sep 2009
Location: America
Posts: 2,375
|
Quote:
__________________
Track Day Videos: http://www.youtube.com/user/mrgoodman2000/videos Built #83817, Born January 18th, Christened June 11th 2010, Stolen October 3rd 2016. Last edited by Mikamaro; 04-10-2015 at 10:07 AM. |
|
04-09-2015, 09:35 PM | #4 |
Drives: 2011 Camaro LS Join Date: Sep 2008
Location: NJ
Posts: 1,917
|
I changed my rears a few months ago and was probably around 75-80k. I'm not at 83xxx and changing out my front rotors/pads next week and I know there is nothing left.
|
04-09-2015, 11:19 PM | #5 |
Drives: 2014 v6 Join Date: Nov 2013
Location: NY_LI
Posts: 395
|
Lol wthhh. I'm at 23K and my brake pads are getting low
|
04-10-2015, 06:31 AM | #6 |
BUMBL Z
|
i'm at 59k and my fronts are just about shot
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
05-11-2015, 02:45 PM | #7 |
Highway Man
Drives: '10 2SS/RS Join Date: Jan 2011
Location: Ear Falls, ON, Canada
Posts: 685
|
Recently changed mine at 50k, went with new OEM pads all around and machined the rotors which still had plenty of life left. Had this done at the dealer as I was in for a new power steering hose anyways and I think it was about $150 for the brake job.
|
|
|
|
|