Hurst Shifter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSjack · 10-18-2009, 03:43 PM

Just finished installing a Hurst shifter in my 2010 2SS LS3. Not too tough. Just follow the instructions supplied by Hurst; maybe even read them before you start. One thing I might add. There is a heat shield just past the trans.; it is a little sharp! There are two speed nuts and towards the rear there is a floor brace that holds the shield in place. Take it out of your way and this will go much smoother. I just took it for a quick ride and it feels like throwing a light switch!!Smooth as silk!

PAUL SS · 10-18-2009, 03:49 PM

Did you take any pics during installation?

2SSjack · 10-18-2009, 04:44 PM

No pic's, but if you go on the Hurst web site and click on the product image for this shifter they have the instructions in PDF format and you can look at them. I also think there already are some pic's listed in the Forum.

2SSRS@Gen5diy · 10-18-2009, 06:09 PM

I put that on thr DIY and this is it at post 1.

http://www.camaro5.com/forums/showthread.php?t=42991

ssmike · 10-18-2009, 06:16 PM

Quote:

Originally Posted by 2SSjack

Just finished installing a Hurst shifter in my 2010 2SS LS3. Not too tough. Just follow the instructions supplied by Hurst; maybe even read them before you start. One thing I might add. There is a heat shield just past the trans.; it is a little sharp! There are two speed nuts and towards the rear there is a floor brace that holds the shield in place. Take it out of your way and this will go much smoother. I just took it for a quick ride and it feels like throwing a light switch!!Smooth as silk!

Yea, and removing the shield will help you find the clips that fall off during the stock removal. I left the shield on and couldn't find one clip till I removed it! Oh, and I LOVE the Hurst shifter! No issues!

linkwpc · 10-19-2009, 10:21 AM

Here is my review the hurst shifter:

http://www.camaro5.com/forums/showthread.php?t=48035

2SSjack · 10-20-2009, 06:55 PM

Actually, I dropped the plastic whatever it is that the stock pivot goes in!

10-18-2009, 03:43 PM	#1
2SSjack Drives: 2010 2SS Camaro; Join Date: Oct 2009 Location: Burbank, Illinois Posts: 49	Hurst Shifter Just finished installing a Hurst shifter in my 2010 2SS LS3. Not too tough. Just follow the instructions supplied by Hurst; maybe even read them before you start. One thing I might add. There is a heat shield just past the trans.; it is a little sharp! There are two speed nuts and towards the rear there is a floor brace that holds the shield in place. Take it out of your way and this will go much smoother. I just took it for a quick ride and it feels like throwing a light switch!!Smooth as silk!

10-18-2009, 03:49 PM	#2
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Did you take any pics during installation? __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

10-19-2009, 10:21 AM	#6
linkwpc The punching cat Drives: '10 Camaro SS Black W/Hugger&W/IOI Join Date: Nov 2007 Location: Torrance, CA Posts: 4,048 View My Garage	Here is my review the hurst shifter: http://www.camaro5.com/forums/showthread.php?t=48035 __________________ My car build (COTW 7/23/12) - - - - - - > CLICK HERE! : http://www.camaro5.com/forums/showthread.php?t=80725

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
first Camaro Hurst shifter installed in 2010 Camaro	2SSRS@Gen5diy	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	347	10-17-2009 12:10 PM
Hurst T-Handle on my hurst shifter	2SSRS@Gen5diy	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	51	10-07-2009 02:40 PM
Dumb question (sorry in advance) Hurst Shifter	2Muchmark	5th Gen Camaro SS LS LT General Discussions	0	04-16-2009 04:52 PM
* The TRUTH about the HURST SHIFTER OPTION ANNOUNCMENT *	CamaroScotty	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	53	03-17-2009 11:32 PM
Thread Size on Hurst Shifter?	r0cketdr	Cosmetics and Lighting Modification Discussions	0	11-18-2008 01:29 PM

10-18-2009, 04:44 PM	#3
2SSjack Drives: 2010 2SS Camaro; Join Date: Oct 2009 Location: Burbank, Illinois Posts: 49	No pic's, but if you go on the Hurst web site and click on the product image for this shifter they have the instructions in PDF format and you can look at them. I also think there already are some pic's listed in the Forum.

10-18-2009, 06:09 PM	#4
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	I put that on thr DIY and this is it at post 1. http://www.camaro5.com/forums/showthread.php?t=42991

10-20-2009, 06:55 PM	#7
2SSjack Drives: 2010 2SS Camaro; Join Date: Oct 2009 Location: Burbank, Illinois Posts: 49	Actually, I dropped the plastic whatever it is that the stock pivot goes in!