Almost new F1-R procharger setup - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

davidsonmotorsports · 07-29-2011, 10:30 PM

After our Kenne Bell build we put this F1-R setup on our car, kit made 960rwhp on a "safe tune." Kit also has a sprag ratcheting pulley which was $500 by itself and full intercooler setup. This kit has less than 50 miles on it.

Main reason for selling is at 20psi and constant upshifting and downshifting it put alot of strain on the belt, even with it being a cog drive setup. Sprag pulley acts like a sprocket on a bike during accel but not during decel.

This kit is more streetable than the kenne bell system we previously had.

$6,500. obo

Contact TJ at 713-530-6830 for more information.
Text or call, please leave voicemail if you call as my phone has been acting up lately.

Jason7 · 07-30-2011, 09:50 AM

I wish.....Im not skilled enough for something like that.....

JASON

GEEo · 07-30-2011, 10:05 AM

Dammm 960whp on safe tune.

any dyno vids of the 960whp?

davidsonmotorsports · 07-30-2011, 12:02 PM

I will see if there are any videos but i doubt it. We were prepping the car to go to chicago for the ultimate street car challenge and didnt get that much time on the dyno.

tsears · 07-30-2011, 03:13 PM

to much blower for my little car. Damn, looks tempting though especially the payment plan!!!!

HufferSS · 07-31-2011, 09:51 AM

What is included?

davidsonmotorsports · 07-31-2011, 11:38 AM

Everything is included, to make it just bolt on. Supercharger,belt, mounting assembly, piping, intercooler.

JLE58 · 08-01-2011, 03:06 AM

take a trade on a maggie? i need this f1!!

davidsonmotorsports · 08-01-2011, 11:21 AM

JLE58, sorry but no trades.

Mojave · 08-02-2011, 06:41 PM

Seems like a great deal ! Wish I was closer on the $$$

Ivan @ Southwest Speed · 08-05-2011, 01:13 AM

Woah.....

Bump for a rediculous deal.
Ivan

JUISSD · 08-08-2011, 10:53 PM

Interested. I'll text you tomorrow.

davidsonmotorsports · 08-16-2011, 12:55 PM

Kit has been sold.

07-29-2011, 10:30 PM	#1
davidsonmotorsports Drives: 2011 "transam" Join Date: Jul 2011 Location: Pearland, TX Posts: 19	Almost new F1-R procharger setup After our Kenne Bell build we put this F1-R setup on our car, kit made 960rwhp on a "safe tune." Kit also has a sprag ratcheting pulley which was $500 by itself and full intercooler setup. This kit has less than 50 miles on it. Main reason for selling is at 20psi and constant upshifting and downshifting it put alot of strain on the belt, even with it being a cog drive setup. Sprag pulley acts like a sprocket on a bike during accel but not during decel. This kit is more streetable than the kenne bell system we previously had. $6,500. obo Contact TJ at 713-530-6830 for more information. Text or call, please leave voicemail if you call as my phone has been acting up lately. Attached Images Last edited by davidsonmotorsports; 08-10-2011 at 11:22 AM.

07-30-2011, 03:13 PM	#5
tsears Drives: 2010 Camaro 2SS/RS - L99 - CGM Join Date: Apr 2010 Location: San Diego Posts: 849	to much blower for my little car. Damn, looks tempting though especially the payment plan!!!! __________________ 2007 Corvette Z06 - Velocity Yellow Halltech \| Forgestar \| Bilstein

08-02-2011, 06:41 PM	#10
Mojave San Diego Head Tuners Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009 Location: Temecula, CA Posts: 2,440 View My Garage	Seems like a great deal ! Wish I was closer on the $$$ __________________ 2016 1SS A8, NPP, MagRide, Black Rims My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders

08-08-2011, 10:53 PM	#12
JUISSD Drives: 2010 White/IOM 2SS/RS M6 Join Date: Jul 2010 Location: Houston, TX Posts: 1,228	Interested. I'll text you tomorrow. __________________ 2010 White/IOM Camaro 2SS/RS M6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about potential exhaust setup.	Xanthos	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	22	07-29-2011 10:59 AM
Switching to non-staggered setup improves cornering?	rolnslo	Wheels and Tires Talk Sponsored by The Tire Rack	31	06-21-2011 11:44 AM
Procharger runs out of air	silverfox	Forced Induction - V8	13	04-07-2011 04:16 PM
SPECIAL PROCHARGER P1SC SYSTEM INSTALLED $7395.00	MirandaBuilt	Forced Induction	0	02-18-2010 03:38 PM
Procharger Installation	Lou23	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	02-10-2010 02:26 PM

07-30-2011, 09:50 AM	#2
Jason7 NorCalCamaros.com Drives: 2010 2SS White Join Date: Mar 2011 Location: California Delta Posts: 1,138 View My Garage	I wish.....Im not skilled enough for something like that..... JASON

07-30-2011, 10:05 AM	#3
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572	Dammm 960whp on safe tune. any dyno vids of the 960whp?

07-30-2011, 12:02 PM	#4
davidsonmotorsports Drives: 2011 "transam" Join Date: Jul 2011 Location: Pearland, TX Posts: 19	I will see if there are any videos but i doubt it. We were prepping the car to go to chicago for the ultimate street car challenge and didnt get that much time on the dyno.

07-31-2011, 09:51 AM	#6
HufferSS I Wanna Go Faster!! Drives: 2011 2SS Synergy Green M6 Join Date: Apr 2011 Location: SC Posts: 3,323	What is included?

07-31-2011, 11:38 AM	#7
davidsonmotorsports Drives: 2011 "transam" Join Date: Jul 2011 Location: Pearland, TX Posts: 19	Everything is included, to make it just bolt on. Supercharger,belt, mounting assembly, piping, intercooler.

08-01-2011, 03:06 AM	#8
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	take a trade on a maggie? i need this f1!!

08-01-2011, 11:21 AM	#9
davidsonmotorsports Drives: 2011 "transam" Join Date: Jul 2011 Location: Pearland, TX Posts: 19	JLE58, sorry but no trades.

08-05-2011, 01:13 AM	#11
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Woah..... Bump for a rediculous deal. Ivan

08-16-2011, 12:55 PM	#13
davidsonmotorsports Drives: 2011 "transam" Join Date: Jul 2011 Location: Pearland, TX Posts: 19	Kit has been sold.