C6 LS3 Fuel Rail Covers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CPDSS · 09-26-2011, 12:31 AM

i dont care for the stock engine cover.

will the c6 ls3 from 2008/2009 vette fuel rail covers fit the camaro fit our car without any modification?

IOM Black Diamond · 09-26-2011, 12:36 AM

Good ?

v6sonoma · 09-26-2011, 01:20 AM

I believe they will as I have seen many with them. Not sure if they need any tweaking but as it's the same engine I would think not. At worst it would be very minor.

gelboy1015 · 09-26-2011, 02:00 AM

If I remember correctly, it requires relocating the heater hoses that go over the intake and getting longer studs for the covers to clip into place. The covers are also shaped differently since the Corvettes have the alternator up top where our PS fluid reservoir is, I believe.

axis · 09-26-2011, 02:16 AM

Will they fit, yes. Will the fit without modifications, no.

CAPT D · 09-26-2011, 03:38 AM

I believe Roto-Fab sells a cover that is similar to the corvette one for our cars.

Roto-fab 1 · 09-26-2011, 10:08 AM

Quote:

Originally Posted by CAPT D

I believe Roto-Fab sells a cover that is similar to the corvette one for our cars.

We do offer custom engine covers just for the Camaro. I can tell you our Camaro covers are quite a bit different than our Corvette covers. We have covers for both N/A cars as well as Supercharged. We offer them bare or we can customize the finish to your taste. You can also get our plenum cover which installs in minutes and really finishes the look of the engine covers. We offer it in a carbon fiber finish or any color you choose.

blackSSRS · 09-26-2011, 10:32 AM

Those are amazing covers!

VaderSS · 09-26-2011, 10:38 AM

Very nice looking fuel rail covers!

mikeyroche · 09-26-2011, 05:31 PM

I just bought C6 fuel rail covers, they look fantastic... I have yet to install them, I'm tryin to figure out the studs I need and if the fuel rails need to be relocated as well. Heater hoses definitely have to be moved

Roto-fab 1 · 09-29-2011, 01:15 PM

Quote:

Originally Posted by blackSSRS

Those are amazing covers!

Thank you very much. I would like to take all of the credit, but we just make parts to fit the car properly. All of the paint and component combinations are chosen by our customers. If you are looking for a custom set of covers, just shoot your ideas by us and we will see if we can get exactly what you want

09-26-2011, 12:31 AM	#1
CPDSS Drives: 2010 SS M6 Join Date: Jan 2011 Location: Chicago Posts: 146	C6 LS3 Fuel Rail Covers i dont care for the stock engine cover. will the c6 ls3 from 2008/2009 vette fuel rail covers fit the camaro fit our car without any modification?

09-26-2011, 12:36 AM	#2
IOM Black Diamond HT5 COTW 1/21/13 Drives: 2010 Camaro Inferno 2SS RS 6M Join Date: Apr 2011 Location: Pleasant Hill, Or Posts: 2,486	Good ? __________________

09-26-2011, 01:20 AM	#3
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	I believe they will as I have seen many with them. Not sure if they need any tweaking but as it's the same engine I would think not. At worst it would be very minor. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

09-26-2011, 02:16 AM	#5
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	Will they fit, yes. Will the fit without modifications, no. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

09-26-2011, 05:31 PM	#10
mikeyroche Drives: 2011 VR Camaro 1SS/RS M6 Join Date: Jul 2011 Location: Ontario, Canada Posts: 576 View My Garage	I just bought C6 fuel rail covers, they look fantastic... I have yet to install them, I'm tryin to figure out the studs I need and if the fuel rails need to be relocated as well. Heater hoses definitely have to be moved __________________ 2011 Camaro 1SS with RS - K&N Typhoon CAI, Borla Atak Exhaust, Hawk Performance Ceramic Pads, SLP 'SS' Front Grille Emblem, Blue LED interior lighting, Camaro Victory Red Seatbelt Harness pads NEXT - Corvette LS3 Victory Red Fuel Rail Covers(Awaiting Installation), Window Tinting, Custom Leather Interior.

09-26-2011, 02:00 AM	#4
gelboy1015 Drives: '10 2SS/RS, MKIII Supras Join Date: May 2010 Location: Houston/Tulsa Posts: 1,009	If I remember correctly, it requires relocating the heater hoses that go over the intake and getting longer studs for the covers to clip into place. The covers are also shaped differently since the Corvettes have the alternator up top where our PS fluid reservoir is, I believe.

09-26-2011, 03:38 AM	#6
CAPT D Drives: 1SS Black w/ White Strips M6 Join Date: Feb 2011 Location: El Paso, Texas Posts: 735 View My Garage	I believe Roto-Fab sells a cover that is similar to the corvette one for our cars.

09-26-2011, 10:32 AM	#8
blackSSRS Drives: 2010 RS Join Date: Feb 2011 Location: FL Posts: 540	Those are amazing covers!

09-26-2011, 10:38 AM	#9
VaderSS Drives: 2010 SS/RS 6sp Join Date: May 2011 Location: Olathe Posts: 169 View My Garage	Very nice looking fuel rail covers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Check engine light on	Boricua	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	4	08-28-2010 01:12 AM
Free shipping on polished logo fuel rail covers at PFYC.com	PFYC	Exterior Parts & Accessories	0	06-29-2010 08:28 AM
Stock Injectors vs Magnuson Kit Injectors	Mark-HD	Forced Induction - V8	24	01-27-2010 08:04 PM
LS3 Specs revealed: GM's 436hp Sick 6.2L LS3	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	07-30-2009 06:02 PM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 05:29 PM