[6spdhyperblue]

Yeah who did the heads

[CJZ-SS1LE]

The heads were done by Mike Lane hes an amazing porter he does awesome wk. He was able to do the heads for me in 2 weeks which was good. Cost is comparable to most other places and they know their stuff. They one of the pioneers of CNC porting did for Nascar and other racing teams for a long time. He was the lead porter for Chapman Racing which helped GM design the LS7 heads. When that company closed he and his brother started Fastlane in Orem, they know their stuff for sure. If anyone is looking for great price and amazing wk call up Mike or Larry thats his brother an they still out there racing all the time.

[CJZ-SS1LE]

Heres a few more pics cars up an running have to tweak the tune its definitely flowing more air according to my log.

[SOCAL.M6.ZLE]

Originally Posted by CJZ-SS1LE

So i went with btr 220 cus i have a 2022 1LE with an A10 and stock stall and i daily it. But i think im goin to go with a circle D 2600-2800 stall and get the trans tuned. Car idles great still gets round 20 mpg round town higher on freeway, an made over 530 whp with cam only fbo and 93 octane. They are adding E85 to a station near me so gettin tuned for that soon. Im debating on adding ported heads have a set done an ready were months out when i got the cam so couldnt wait. Just sucks cus its running sooooooo good i dont know if itll be worth it haha. But for me here is what im running

Kooks headers, high flow cats
MSD manifold unported
Katech 103mm tb
Katech C5R timing chain
Katech oil pump
LME timing chain guide
Morel lifters
Btr platnium springa with titanium retainers
Btr push rods
Rotofab intake
Tuned on dyno

Tryin to justify 1800 more to get the heada an put them in i just dont know if itll make a noticable difference.

Great parts list... you are going to be one happy camper

[6spdhyperblue]

Originally Posted by CJZ-SS1LE

Heres a few more pics cars up an running have to tweak the tune its definitely flowing more air according to my log.

How’s it run? Does it pull harder?

[Dynamical]

Originally Posted by CJZ-SS1LE

So i went with btr 220 cus i have a 2022 1LE with an A10 and stock stall and i daily it. But i think im goin to go with a circle D 2600-2800 stall and get the trans tuned. Car idles great still gets round 20 mpg round town higher on freeway, an made over 530 whp with cam only fbo and 93 octane. They are adding E85 to a station near me so gettin tuned for that soon. Im debating on adding ported heads have a set done an ready were months out when i got the cam so couldnt wait. Just sucks cus its running sooooooo good i dont know if itll be worth it haha. But for me here is what im running

Kooks headers, high flow cats
MSD manifold unported
Katech 103mm tb
Katech C5R timing chain
Katech oil pump
LME timing chain guide
Morel lifters
Btr platnium springa with titanium retainers
Btr push rods
Rotofab intake
Tuned on dyno

Tryin to justify 1800 more to get the heada an put them in i just dont know if itll make a noticable difference.

Just curious, why such a small stall? Stock is 2500.

[6spdhyperblue]

Does the car push?

[CJZ-SS1LE]

The car is pushing more air mass according to the log an running great but dont want to push it til i get my wideband and make sure the AFR is on point. I think i have a small exhaust leak on passanger side cause i have a weird squeek coming from passanger side. I was worried it was a possible lifter wheel squeek. But it wasnt doing it right when i replaced the heads but heads are perfect and i didnt touch the lifters and their only a few weeks old. Didnt mill the heads and goes away off idle and is sporatic.

An i will go with whatever stall they say will wk with the cam i have, circle D is who im goin with

[6spdhyperblue]

Nice. Is there anyway I can make an idle video?

I mean does the car push through the brakes bc the converter is tight in drive

[CJZ-SS1LE]

Originally Posted by 6spdhyperblue

Nice. Is there anyway I can make an idle video?

I mean does the car push through the brakes bc the converter is right in drive

Ill get an idle video and no it doesnt push through the brakes it just lopes pretty good. But it does try to do so haha.

[CJZ-SS1LE]

I have a video but wont let me upload so if you pm me your email or phone # i can send it maybe you can figure out how to upload it

[6spdhyperblue]

Sent pm

Last question. What’s your idle rpm set to ac off

[s346k]

any dynographs with this setup? with or without heads...?

[CJZ-SS1LE]

I have a dyno before and currently its at my tuners for a dyno tune today and ill have one after as well.

My idle is set at 775 with ac off