09-21-2012, 10:12 AM | #1 |
Drives: Camaro ZL1 Join Date: May 2012
Location: Houston
Posts: 233
|
Complete Intercooler System
If you are like me, you want to know all possible parts choices before you buy. I personally found and used this set-up. If you are not going the super chiller route, check these guys out. Thus far, IAT2s have stayed within 10 degrees of ambient using this system, even under WOT on a 95+ degree day, pushing between 13 and 15lbs of boost. Made by D3 Performance Engineering.
Here are a couple pics from my car (it was the prototype build car) Last edited by Drew P; 09-21-2012 at 11:18 AM. |
09-21-2012, 11:43 AM | #2 |
FAVOR
Drives: Many Different Rides Join Date: Aug 2010
Location: GA
Posts: 783
|
nice
__________________
Please be kind when you drive; thank you.
|
09-21-2012, 12:47 PM | #3 |
Drives: VR ZL1 #259/Nissan 370Z NISMO Join Date: Aug 2008
Location: Ohio
Posts: 1,071
|
Do you have a website--i didnt come up with anything...
T |
09-21-2012, 03:10 PM | #4 |
Petro-sexual
|
Please don't post out of respect for our Vendors and Sponsors. These guys are heavy on Cadillacs. PM only
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
09-21-2012, 03:24 PM | #5 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
If I wanted to tear that much into my car, I would just get the RX super chiller system.
A lot of these places make these things, but not everyone wants to start tearing the front fascia off their cars. Not knocking the system, but if you're gonna go that far, the RX super chiller is the best bang for the buck. |
09-23-2012, 06:08 PM | #6 |
Drives: 2013 ZL1 #659 Join Date: Aug 2011
Location: Tampa
Posts: 151
|
I have this kit coming in this week, will write up a nice review about it !
__________________
Order# QKTDRT
2013 ZL1 Ashen Gray |
09-24-2012, 07:35 AM | #7 |
Drives: Camaro ZL1 Join Date: May 2012
Location: Houston
Posts: 233
|
Just to clarify, I have no business connection with D3 Performance. Just sharing my experience with those that are interested. As far as "tearing into the car," this is a bolt-on system, so Im not quite sure I understand what you mean jimmy5. Taking off the front fascia is a fairly simple task, and like I said, this is for those not interested in using the super chiller. You will also notice two things that are (as far as I can tell) unique about this kit: 1) you receive a large volume reservoir without losing space in the engine bay or needing to move the washer bottle; 2) the reservoir has air cooled heat sinks at the bottom which further cool the water temps before returning to the intercooler. I dont want to seem like Im a salesman, so if you have questions feel free to PM me.
|
09-24-2012, 01:56 PM | #8 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Very High quality stuff but will not fit the ZL-1 just talked with them.
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
09-24-2012, 02:08 PM | #9 |
09-24-2012, 02:09 PM | #10 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Not sure I called D3 and asked they said it would not fit, I could be wrong.
If it does they will be available through JRE. They're Performance department is suppose to call me back with verification.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 09-24-2012 at 02:39 PM. |
09-24-2012, 04:34 PM | #11 |
Petro-sexual
|
COOL NEWS IF JRE COULD SELL THEIR PRODUCTS!!! I've been watching them for a couple years but hadn't posted because of our Sponsors. If J' can get their products in here, that'd be super! They do carshow work for Cadillac Brand if I'm not mistaken
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
09-24-2012, 04:35 PM | #12 |
Petro-sexual
|
OH!!! Does that cooler replace the OEM H/E or does it supplement it? For anyone curious - their billet pulleys are frickin' cool!!! They have some bad@$$ videos of their cars, too.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
09-24-2012, 07:33 PM | #13 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
For the $ spent, your adding 20 some # of wieght (every 100#'s is a tenth in the 1/4 mile), twice what the RX Super Chiller is, and if it is 100* outside then 110* is the coolest it could cool.
Superchiller will cool to 30-40-50* and takes a fraction of the room..... |
09-25-2012, 09:25 AM | #14 | |
Petro-sexual
|
Quote:
Thanks KUDOs on what I know were GREAT results.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|