Halos - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

maxcamaro · 08-20-2013, 03:04 AM

Phastek Dual-Color HALO Headlight Kit by Oracle :: All 2010-2013 Camaro SS/LS/LT/RS

Read more: http://www.phastekperformance.com/20...#ixzz2cUhqwI9L

Is this all I need to give my non RS 2LS Halos? ($189.95) And how much would installation cost? Seems too good to be true.

OzzySS · 08-20-2013, 03:19 AM

Looks to be about right. It's a different kit than what I used, but it should be all you need if you just plan to use the switch. I wound up getting a little crazier with my install, so I bought more wiring, which you will probably need as well (plus splices/connectors). The halo wires just aren't long enough if you plan to run them into the cabin.
As for install price, I can't help you there. I did everything myself.

maxcamaro · 08-20-2013, 10:04 AM

Quote:

Originally Posted by OzzySS

Looks to be about right. It's a different kit than what I used, but it should be all you need if you just plan to use the switch. I wound up getting a little crazier with my install, so I bought more wiring, which you will probably need as well (plus splices/connectors). The halo wires just aren't long enough if you plan to run them into the cabin.
As for install price, I can't help you there. I did everything myself.

Thanks. If I buy this kit can I just take it to any auto body?
And would they have the extra wiring there because I wouldn't know where to buy it.

OzzySS · 08-20-2013, 12:04 PM

Quote:

Originally Posted by maxcamaro

Thanks. If I buy this kit can I just take it to any auto body?
And would they have the extra wiring there because I wouldn't know where to buy it.

Hmm, that I'm not sure about. Best bet would probably be to call some tuner/custom shops instead of body shops, I'd think. See what they say first. Everything I've done so far has been diy, so I don't have a lot of experience with the shops, sorry

Michaels2011 · 08-20-2013, 04:50 PM

You are looking at just the kit...You have to open your lites to do this.....

Hawk3907 · 08-20-2013, 04:55 PM

I suggest going with the Eagle Eye headlights. They have the Halo built in and they look fantastic.

31B · 08-20-2013, 04:57 PM

You need to separate the headlights with a heat gun or stick em in an oven for 20 min to loosen adhesive. you can splice them into the DRL's I believe so don'thave to run a switch.

maxcamaro · 08-20-2013, 05:10 PM

Would pep boys do this? Or a Chevrolet Service dept, or a local auto body?

camaro_RS · 08-20-2013, 08:27 PM

Quote:

Originally Posted by Hawk3907

I suggest going with the Eagle Eye headlights. They have the Halo built in and they look fantastic.

Whereas those do look good...the OP wants dual color halos as to change them up. The eagle eyes do not do this.

maxcamaro · 08-20-2013, 09:53 PM

Quote:

Originally Posted by camaro_RS

Whereas those do look good...the OP wants dual color halos as to change them up. The eagle eyes do not do this.

Where did you go for your installation?

08-20-2013, 03:04 AM	#1
maxcamaro Drives: 2013 2ls Join Date: Aug 2013 Location: california Posts: 36	Halos Phastek Dual-Color HALO Headlight Kit by Oracle :: All 2010-2013 Camaro SS/LS/LT/RS Read more: http://www.phastekperformance.com/20...#ixzz2cUhqwI9L Is this all I need to give my non RS 2LS Halos? ($189.95) And how much would installation cost? Seems too good to be true.

08-20-2013, 03:19 AM	#2
OzzySS Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012 Location: jax, FL Posts: 1,344 View My Garage	Looks to be about right. It's a different kit than what I used, but it should be all you need if you just plan to use the switch. I wound up getting a little crazier with my install, so I bought more wiring, which you will probably need as well (plus splices/connectors). The halo wires just aren't long enough if you plan to run them into the cabin. As for install price, I can't help you there. I did everything myself. __________________ Build thread linked in the pic...

08-20-2013, 04:50 PM	#5
Michaels2011 Drives: 2014 2lt/RS Join Date: Aug 2010 Location: St Augustine Posts: 564 View My Garage	You are looking at just the kit...You have to open your lites to do this..... __________________ K&N cai..... WCC underhood lighting.... 1LE strut tower brace.... Custom painted Fuse box/engine covers & strut tower brace.... Pfadt 1.25 lowering springs.....Ghosted side markers.....

08-20-2013, 04:55 PM	#6
Hawk3907 Drives: 2013 Join Date: Jul 2013 Location: Kansas Posts: 207	I suggest going with the Eagle Eye headlights. They have the Halo built in and they look fantastic. __________________ Hawk3907 2013

08-20-2013, 04:57 PM	#7
31B Drives: 2014 Black 1SS A6 Join Date: Jun 2013 Location: Cameron, NC Posts: 659	You need to separate the headlights with a heat gun or stick em in an oven for 20 min to loosen adhesive. you can splice them into the DRL's I believe so don'thave to run a switch.

08-20-2013, 05:10 PM	#8
maxcamaro Drives: 2013 2ls Join Date: Aug 2013 Location: california Posts: 36	Would pep boys do this? Or a Chevrolet Service dept, or a local auto body?