Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions


Reply
 
Thread Tools
Old 08-09-2010, 08:43 PM   #1
Rob191288
 
Rob191288's Avatar
 
Drives: 2010 Camaro LS
Join Date: Jun 2010
Location: Andrews AFB, MD
Posts: 586
AAC Footwell Lighting

Finally got my complete set of Amber footwell lighting installed in my black LS and I gotta say I couldn't be more happier with it. Put in 2 15in tubes and the Amber LED interior and trunk lights.

Also wanna say a big thanks to Jamie and Justin over at AAC for helping me. One of my tubes was broke in shipment and they were kind enough to send me another one for a replacement, got here in 2 days if your looking to do a mod like this I highly recommend AAC as their products are great and their customer service is excellent!!




Last edited by Rob191288; 08-09-2010 at 08:44 PM. Reason: Pictures
Rob191288 is offline   Reply With Quote
Old 08-09-2010, 08:51 PM   #2
overhaulengines
 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
awesome, looks great.

Lupe
overhaulengines is offline   Reply With Quote
Old 08-09-2010, 08:51 PM   #3
LadiesMan217

 
LadiesMan217's Avatar
 
Drives: '10 IOM/IO 2SS/RS
Join Date: Feb 2008
Location: MA
Posts: 1,680
Looks awesome man. Great job.
__________________
Proud Member of NEC5!
LadiesMan217 is offline   Reply With Quote
Old 08-09-2010, 10:37 PM   #4
henchmen3
 
henchmen3's Avatar
 
Drives: 2010 all white
Join Date: Jun 2010
Location: Maryland
Posts: 71
They look good, just put in blue ones in my ride. I dont understand how people are having any torubles at all with the install. Took me 20 minutes top to install both tubes and wire in a trunk LED too.
Attached Images
   
henchmen3 is offline   Reply With Quote
Old 08-09-2010, 10:54 PM   #5
ss=scuba steve

 
ss=scuba steve's Avatar
 
Drives: 2011 1SS Cyber Gray Metallic
Join Date: Jul 2010
Location: SoFla
Posts: 863
Can any of you guys give me some specifics on installation instructions, and where to purchase with cost ? Looks sweet, thanks in advance.......
ss=scuba steve is offline   Reply With Quote
Old 08-10-2010, 07:23 AM   #6
Rob191288
 
Rob191288's Avatar
 
Drives: 2010 Camaro LS
Join Date: Jun 2010
Location: Andrews AFB, MD
Posts: 586
I got mine from http://www.automotivelightstore.com/...ingpair-1.aspx, they cost $35 for 2 12in tubes or $39.50 for 2 15in tubes and then the interior/trunk LED's are $27.

They are really easy to install like Henchmen said, it took about 20mins to get them in. All I did was T-tap the interior light wire under the steering wheel, and ground them to a nut next to the center console and then zip tied them under the dash. There is a forum on here about installing them, let me see if I can find it for you.

EDIT: Here you go Steve, this is what I used to figure out what wire to tap into and what bolt to ground to. http://www.camaro5.com/forums/showthread.php?t=54183

Quote:
Originally Posted by ss=scuba steve View Post
Can any of you guys give me some specifics on installation instructions, and where to purchase with cost ? Looks sweet, thanks in advance.......
Rob191288 is offline   Reply With Quote
Old 08-10-2010, 11:23 AM   #7
CaniacFan


 
CaniacFan's Avatar
 
Drives: '10 SS CGM #75,288, '14 Stingray
Join Date: Aug 2009
Location: Wake Forest, NC
Posts: 3,938
Looks great, nice appearance mod..
CaniacFan is offline   Reply With Quote
Old 08-10-2010, 11:36 AM   #8
henchmen3
 
henchmen3's Avatar
 
Drives: 2010 all white
Join Date: Jun 2010
Location: Maryland
Posts: 71
I used the Gray wire behind the pass kick panel, it is the power for the dome light so they all come on and dimm off together.
henchmen3 is offline   Reply With Quote
Old 08-10-2010, 01:04 PM   #9
Rob191288
 
Rob191288's Avatar
 
Drives: 2010 Camaro LS
Join Date: Jun 2010
Location: Andrews AFB, MD
Posts: 586
Quote:
Originally Posted by henchmen3 View Post
I used the Gray wire behind the pass kick panel, it is the power for the dome light so they all come on and dimm off together.
Same wire I tapped into.
Rob191288 is offline   Reply With Quote
Old 08-10-2010, 01:21 PM   #10
ss=scuba steve

 
ss=scuba steve's Avatar
 
Drives: 2011 1SS Cyber Gray Metallic
Join Date: Jul 2010
Location: SoFla
Posts: 863
Thanks rob awesome info, you da man !
ss=scuba steve is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AAC Footwell Lighting Rob191288 Cosmetics and Lighting Modification Discussions 8 08-05-2010 02:20 PM
AAC Footwell lighting questions RJT Cosmetics and Lighting Modification Discussions 6 05-02-2010 12:24 PM
In regards to AAC footwell lighting Winslow Cosmetics and Lighting Modification Discussions 10 04-29-2010 07:43 AM
ABL lighting and Footwell Light Install? JProberts USA - Mid-Atlantic 3 02-25-2010 10:17 PM
AACStyle footwell lighting problem TRSS2 Camaro DIY & HOW-TO instructions & discussions 8 01-23-2010 06:41 PM


All times are GMT -5. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.