Concept Mirrors??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hvychvy970 · 06-30-2011, 03:00 PM

I have done quite a bit of researching but still haven't found a set of concept side mirrors to buy anywhere. Does anyone know if these exist?

The Stig · 06-30-2011, 03:10 PM

Yes they do. A member named "Blacky" built himself a set. Then he built another member a set. He has as of now stopped building them.

hvychvy970 · 06-30-2011, 03:13 PM

I saw that and was wondering if anyone else has. I cannot believe it.

Ringo · 06-30-2011, 03:16 PM

He's reworking them so he can make them from plastic and not fiberglass. I got a pm from him just last week. I'd say either just be patient and wait, or give it a go yourself. His versions look pretty awesome!

hvychvy970 · 06-30-2011, 03:25 PM

I saw something about him just making the housing and we would have to get a mirror cut for it?

The Stig · 06-30-2011, 03:38 PM

No he can get you the mirror as well. The motor you're on your own for though.

alssiri · 06-30-2011, 03:54 PM

Quote:

Originally Posted by stieger

No he can get you the mirror as well. The motor you're on your own for though.

Yes available but manual ,no motor.

Ahmad

bo3adlah · 06-30-2011, 04:04 PM

u can get a motor off of a ford puma thats what i did

Ringo · 07-01-2011, 12:03 PM

Did you happen to take any pictures of your mirrors while they were being assembled? Any pictures of them at all would be great!

Blacky · 07-01-2011, 12:24 PM

Yes , i work here on new molds for the Version 2 of my Conzept style Mirrors.
i will look that i can build (produce) the Parts in Plastik and not in Fiberglass. but for this i must make an mold with more parts. olso an inner part, so i think the Puma motors will not fit in this new Version. i have made completly new Mirror Models.
An Friend have send my the 3D File from an Conzept mirror, so i could print the File out with an 3D Printer in the nearly Original Size(little Bigger than the OEM Conzept) because the real Conzepts are to small.
OK now im on the work to correkt the angles of the mirrorhousing so that the mirrorglass is nearly paralel to the housing.
you must think we sit not in the mittle of the Car so the angles and Mirrors are not 100% paralel in the symetrie.
The right have an other angle then the left mirror.Its a hard work with mount and demount the mirrors again and again on my car. My Version 1 i have build Symetrical so the Mirrorglass is not in the same position on the left and right mirror.
In the moment the New Proto Housings are ready , and now i will give them to an Paint shop after the weekend, they will paint the modells so that i become out Parts wit an nearly perfect finish befor i make the new Molds, ok every part have work after put it out of an Mold.
The good is the new V2 Mirrors are more acurate in the Form. here an Pic of the (MODEL)

here i have made little Pics - hope you like my Work

Ringo · 07-01-2011, 12:31 PM

Nice! I'm in for a set when you get one.

jmart53 · 07-01-2011, 12:42 PM

I'm in also

The Stig · 07-01-2011, 12:55 PM

I'm in for a set of these Blacky.

Ringo · 07-01-2011, 01:12 PM

How were you planning on casting the mirrors? If the wall thickness was thin and even, you could maintain strength and still have room so we may be able to get motors for the mirrors to work. Roto-casting would be an option as seen here.

06-30-2011, 03:00 PM	#1
hvychvy970 Drives: Black 2011 2SSRS owner Join Date: Oct 2010 Location: MO Posts: 246	Concept Mirrors??? I have done quite a bit of researching but still haven't found a set of concept side mirrors to buy anywhere. Does anyone know if these exist? __________________ Colossians 3:17 RK Sport Rear Spoiler/Black Chrome Powder Coated SS Wheels/Air Lift Suspension/MagnaFlow Competition Axleback 5" Tips/Hurst Short Throw Shifter/Trinity 1000 Programmer/Black GM Heritage Grille/Street Scene Lower Grille w/Ducts/20% Tint/Smoked Exterior Lens Kit/Driver's Side Grand Sport Hash Marks Flat Black

06-30-2011, 03:10 PM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Yes they do. A member named "Blacky" built himself a set. Then he built another member a set. He has as of now stopped building them. __________________

06-30-2011, 03:13 PM	#3
hvychvy970 Drives: Black 2011 2SSRS owner Join Date: Oct 2010 Location: MO Posts: 246	I saw that and was wondering if anyone else has. I cannot believe it. __________________ Colossians 3:17 RK Sport Rear Spoiler/Black Chrome Powder Coated SS Wheels/Air Lift Suspension/MagnaFlow Competition Axleback 5" Tips/Hurst Short Throw Shifter/Trinity 1000 Programmer/Black GM Heritage Grille/Street Scene Lower Grille w/Ducts/20% Tint/Smoked Exterior Lens Kit/Driver's Side Grand Sport Hash Marks Flat Black

06-30-2011, 03:16 PM	#4
Ringo Politically incorrect Drives: 2SS/RS Join Date: Jun 2009 Location: Soggy Seattle Posts: 782	He's reworking them so he can make them from plastic and not fiberglass. I got a pm from him just last week. I'd say either just be patient and wait, or give it a go yourself. His versions look pretty awesome! __________________ 2SS/RS M6 IO interior. Built 8/14/09. Delivered 9/9/09.

06-30-2011, 03:25 PM	#5
hvychvy970 Drives: Black 2011 2SSRS owner Join Date: Oct 2010 Location: MO Posts: 246	I saw something about him just making the housing and we would have to get a mirror cut for it? __________________ Colossians 3:17 RK Sport Rear Spoiler/Black Chrome Powder Coated SS Wheels/Air Lift Suspension/MagnaFlow Competition Axleback 5" Tips/Hurst Short Throw Shifter/Trinity 1000 Programmer/Black GM Heritage Grille/Street Scene Lower Grille w/Ducts/20% Tint/Smoked Exterior Lens Kit/Driver's Side Grand Sport Hash Marks Flat Black

06-30-2011, 03:38 PM	#6
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	No he can get you the mirror as well. The motor you're on your own for though. __________________

06-30-2011, 04:04 PM	#8
bo3adlah Drives: Camaro SS Join Date: Aug 2010 Location: kuwait Posts: 554	u can get a motor off of a ford puma thats what i did __________________ _____________________________________________ mods : bb stripes , showstopper side markers , grill blackout , trunk blackout , interior AAC blue bulb , removed grill ss emblem , the bee-otch and disco ball ,concept diffuser , concept side mirrors. soon to come: taillights , maybe wheels , interior roof alcantra material .

07-01-2011, 12:03 PM	#9
Ringo Politically incorrect Drives: 2SS/RS Join Date: Jun 2009 Location: Soggy Seattle Posts: 782	Did you happen to take any pictures of your mirrors while they were being assembled? Any pictures of them at all would be great! __________________ 2SS/RS M6 IO interior. Built 8/14/09. Delivered 9/9/09.

07-01-2011, 12:24 PM	#10
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	Yes , i work here on new molds for the Version 2 of my Conzept style Mirrors. i will look that i can build (produce) the Parts in Plastik and not in Fiberglass. but for this i must make an mold with more parts. olso an inner part, so i think the Puma motors will not fit in this new Version. i have made completly new Mirror Models. An Friend have send my the 3D File from an Conzept mirror, so i could print the File out with an 3D Printer in the nearly Original Size(little Bigger than the OEM Conzept) because the real Conzepts are to small. OK now im on the work to correkt the angles of the mirrorhousing so that the mirrorglass is nearly paralel to the housing. you must think we sit not in the mittle of the Car so the angles and Mirrors are not 100% paralel in the symetrie. The right have an other angle then the left mirror.Its a hard work with mount and demount the mirrors again and again on my car. My Version 1 i have build Symetrical so the Mirrorglass is not in the same position on the left and right mirror. In the moment the New Proto Housings are ready , and now i will give them to an Paint shop after the weekend, they will paint the modells so that i become out Parts wit an nearly perfect finish befor i make the new Molds, ok every part have work after put it out of an Mold. The good is the new V2 Mirrors are more acurate in the Form. here an Pic of the (MODEL) here i have made little Pics - hope you like my Work Attached Images __________________

07-01-2011, 12:31 PM	#11
Ringo Politically incorrect Drives: 2SS/RS Join Date: Jun 2009 Location: Soggy Seattle Posts: 782	Nice! I'm in for a set when you get one. __________________ 2SS/RS M6 IO interior. Built 8/14/09. Delivered 9/9/09.

07-01-2011, 12:42 PM	#12
jmart53 Drives: 2012 Cruze LTZ RS Join Date: Feb 2011 Location: The Badger State Posts: 564	I'm in also __________________

07-01-2011, 12:55 PM	#13
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	I'm in for a set of these Blacky. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2011 Chevrolet Camaro SSX Track Car Concept Debuts at SEMA	RLHMARINES	Camaro Photos \| Spyshots \| Video \| Media Gallery	198	03-15-2012 02:48 PM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 09:23 PM
Concept Mirrors	chrisgalles	Cosmetics and Lighting Modification Discussions	3	10-23-2009 05:52 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 04:38 PM
Chevy Rev It Up Tour Dates-Featuring the 5th Gen Concept	TAG UR IT	5th Gen Camaro SS LS LT General Discussions	3	06-29-2007 03:30 AM