Lingenfelter Performance Engineering Customers

[paul2010]

That is an awesome video!! I would have to have an auto.

[midgard]

Paul:

Any more times in the 1/4....off your gauges

[paul2010]

Originally Posted by midgard

Paul:

Any more times in the 1/4....off your gauges

Here was another one. I can't get a good take-off on a regular road. I am thinking at a hot track I should be able to hook up a little better.

[JusticePete]

Originally Posted by paul2010

Here was another one. I can't get a good take-off on a regular road. I am thinking at a hot track I should be able to hook up a little better.

NICE!!!

[mws444]

Hey Pete, are all of the parts for my car going to make it for late May?
I cant wait to see how all of this work on the suspension drives, I ordered the "Jusice package" with the new remote coilovers, so I guess mine will be pretty close to yours.

[600hp-lpe]

Originally Posted by JusticePete

When do you get aligned?

Hi Pete,
Friday or Saturday... I still have to work the date/time out with Rob at expert tire.

Any thoughts on how I should set up the car for the alignment? I don't care too much about tire wear. Should I follow what you have set for Alignment? I did see Mike post it in a thread on the camaro5 site somewhere.

I found the alignment spec's mike posted.. I think I am going to set up using these spec's..

Front

Cambers to -2.4 degrees
Caster 7.5 to 8.0. Requires Pedders Caster eccentrics
Toe .25 degees toe out each wheel. (This setting should not be used for the street)

Rear
Camber -1.2 degrees, Required Pedders rear eccentrics
Toe .05 toe in each wheel.

Presently, I am at -1.0 neg camber for all 4 wheels.
Toe out in the front was minimal (I don't remember actual #)
0 toe in the rear if I remember correctly.
Caster was still stock as I was waiting for the Eccentrics.

[600hp-lpe]

Pete, I owe you a BIG THANK YOU for getting me squared away.

For those thinking of Pedders suspension parts, Pete went WAY above where most people would go for one of their customers.

Customer service off the chart! Pete took parts off his own car to complete my suspension build so I can race this week-end...

I guess I will REALLY have a "true" Justice Pete suspension!

[mws444]

Originally Posted by 2010 BADSS

That's interesting that he said the Nitto's run large. On both our cars the 305/35/20 Nittos were actually slightly shorter than our stock Pzero's. Maybe he meant compared to other DR's. On both cars we had slightly more gap between the wheel well and tire, and my car I noticed even lowered slightly more.


Nice trailer Paul. You guy's are going to have a blast at C5fest. Wish we could go. Make sure to take pics!


570 Looking good!

Sorry by bigger I meant wider. At least that is what I have been told.

[paul2010]

Originally Posted by 570hp-lpe

Pete, I owe you a BIG THANK YOU for getting me squared away.

For those thinking of Pedders suspension parts, Pete went WAY above where most people would go for one of their customers.

Customer service off the chart! Pete took parts off his own car to complete my suspension build so I can race this week-end...

I guess I will REALLY have a "true" Justice Pete suspension!

That doesn't suprise me. Pete is that kinda guy he gave me the shirt off his back!

[mws444]

Yep Pete seems like a stand up guy. It is nice to run across someone who takes customer service personally. If everything goes well I should be able to personally vouch for Pedders quality around the end of May. I am getting excited about what kind of difference all this word will make in the way of performace.

[600hp-lpe]

Originally Posted by 2010 BADSS

The painter should be getting my parts friday, I'm still demolitioning. He said it would probably take about 2 weeks. I think they will come out cool. This guy is quite an artist! He is known in our area for custom painting motorcycles. RS and I are the same way in Ping Pong. We can probably play 20 games and each win 10! Makes it stay interesting.

2010, If you send me a PM with your email address, I can send you some pic's on how we taped the stripes on my car. I sent them to Blue already.. Garth was thinking of applying his stripes similar to my stripe layout.

I don't mind sharing...

[600hp-lpe]

Originally Posted by paul2010

That doesn't suprise me. Pete is that kinda guy he gave me the shirt off his back!

Me too... Pete sent me one of those HOT Pedders T-shirts as well...

Pete's clothing the brotherhood! LOL Thanks again Pete!

[Windy City]

Originally Posted by mws444

Hey Windy, How it going Buddy? They are working me to death here....figure in a couple of months I can play a little harder.
How do you like those rotors? I have mine on but performance wise they are about the same on the street. A lot lighter though...and I am sure if pushed hard they will resist fade better. Now my best guess is this fall on the rears.
Maybe Speed or 570 know more...guys?
The Mrs. get her CTSV to LPE yet?

Hey MWS, how ya dooin?!
Sounds like your busy, that's a good thing! There is a whole lot o people who ain't!
Funny ya asked about the rotors, just got em on tonight!

"Vee" hasn't shown up yet, Mrs. Windy is anxiously awaiting her arrival. She was scheduled to be here last Friday but no show. I would expect in the next few days.
We are going to drive it for a month or two before sending her for a little Lingy magic!
Good to hear from ya, take care of your nuts!

[JusticePete]

Originally Posted by 570hp-lpe

Pete, I owe you a BIG THANK YOU for getting me squared away.

For those thinking of Pedders suspension parts, Pete went WAY above where most people would go for one of their customers.

Customer service off the chart! Pete took parts off his own car to complete my suspension build so I can race this week-end...

I guess I will REALLY have a "true" Justice Pete suspension!

Dan, it was my pleasure. Now go smoke those other guys this weekend. As for alignment specs, I'll speak with Rob at Wretched and make certain you have an edge.