01-20-2013, 05:50 PM | #1 |
Drives: Ellie Join Date: Oct 2012
Location: Chicago
Posts: 83
|
Razzi V-6 front Lip splitter. Glue or 3m tape.
Do you have to use the Glue in this kit to install Razzi front lip spoiler ? I was wondering if you could use the 3m tape instead..Im not really a fan of the glue just in-case i change my mind and wont to take it off
|
01-20-2013, 11:07 PM | #2 |
Emerald Coast Camaros
Drives: A lot of show, not much go. Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,388
|
I'm pretty sure it was the tape used to install mine. Works good.
|
01-20-2013, 11:13 PM | #3 |
Drives: 2010 Camaro LS V6 Join Date: Jul 2010
Location: Tampa, Florida
Posts: 2,784
|
3m AND find some small bolts if you feel you need it to be more secure
__________________
C-LO or Sonic
"Without Struggle there is no progress" I am your best nightmare! |
01-20-2013, 11:16 PM | #4 |
Drives: Ellie Join Date: Oct 2012
Location: Chicago
Posts: 83
|
|
01-21-2013, 06:50 AM | #5 |
CB5thGEN
Drives: 2013 2SS/RS BRM 1LE, 05 Trailblazer Join Date: Oct 2009
Location: VA Beach
Posts: 948
|
dont glue,. use the 3mm and rivits if you feel the tape isnt secure enough. and.. if you have the side skirts... be wary of portable dynos... we were on one last summer and it ripped my drivers skirt right off.. not a happy camper
|
01-21-2013, 07:24 AM | #6 |
Drives: 2012 1SS LS3 M6 black on black :) Join Date: May 2012
Location: SD
Posts: 1,342
|
Don't use glue. If and when you ever decide to remove it the splitter it will damage and possible pull the paint off. You'll be kicking yourself for using glue.
|
01-21-2013, 08:55 AM | #7 |
Drives: Ellie Join Date: Oct 2012
Location: Chicago
Posts: 83
|
thanks
|
01-21-2013, 09:03 AM | #8 |
NEcamaro5
|
Dam strait DON'T use the glue. I did and then hit a 2x4 on the highway at 80 and it shattered the driver side lower razzy. Then I wanted to fix it and I can't get the pieces off the nose. So now I have a new nose and a crappy spare
|
01-21-2013, 09:06 AM | #9 |
Drives: Ellie Join Date: Oct 2012
Location: Chicago
Posts: 83
|
yeah i didnt like the idea of the glue at all..
|
01-21-2013, 09:08 AM | #10 |
[COTW 5/12/14]
Drives: 2012 CRT NF Cammed 2SS/RS For Sale Join Date: Oct 2011
Location: NOLA
Posts: 6,115
|
most of those adhesives will eat through clear coat and glue, so, not a good idea. I did it on a car that we were actually coming back and using filler to blend the ground effects into the rear bumper, so it was definitely permanent. Anything else, use tape, and rivets if desired
|
03-29-2013, 03:45 PM | #11 |
Drives: ELLE-1 Join Date: Jul 2011
Location: Farmington ,mo
Posts: 1,175
|
these L shaped brackets ,,do i use all four for the two front wheels????i would assume that you would only use the two smaller ones,,,help!!
__________________
|
03-29-2013, 04:32 PM | #12 |
Drives: 2010 Black LS Join Date: Jul 2010
Location: Buffalo
Posts: 289
|
I plan on mounting mine with the brackets and then making something to attach the nose of it to the two bolts under the front bumper. I have to take mine off when I starts to snow so it doesn't turn into a plow
|
|
|
|
|