Atlanta Club Lounge - Page 1091 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroKid300 · 11-25-2013, 08:32 PM

Quote:

Originally Posted by OK2DRUL

Lethal racing quoted me $2400 for their night fury cam installed and tuned. I think I'd want to ride in someone's before I did all that to see gains/drivability. Even though a supercharger is more I think it would make a better daily driver.

I love that cam. but I've read a lot and the drivability below 1900-2000 rpms is non existent.

SlowSS · 11-25-2013, 09:05 PM

Can't wait for Dyno day! I will most likely be on the dyno as well.

So J.T., you going to go head and do the headers instead of the springs?

CamaroKid300 · 11-25-2013, 09:15 PM

Quote:

Originally Posted by SlowSS

Can't wait for Dyno day! I will most likely be on the dyno as well.

So J.T., you going to go head and do the headers instead of the springs?

That is correct! I honestly don't think I am going to lower for a while. If I lower there will be a lot of places I will scrape that I barely clear now. Add that with a splitter I want to get eventually....bad bad bad

SlowSS · 11-25-2013, 09:24 PM

Quote:

Originally Posted by CamaroKid300

That is correct! I honestly don't think I am going to lower for a while. If I lower there will be a lot of places I will scrape that I barely clear now. Add that with a splitter I want to get eventually....bad bad bad

I hear ya! Sending you a text

CamaroKid300 · 11-25-2013, 09:29 PM

Quote:

Originally Posted by SlowSS

I hear ya! Sending you a text

receiving a text.

4RD H8R · 11-25-2013, 10:05 PM

Unless something very unexpected happens I will be there. Will be interested to see what kind of numbers the car will do on a different dyno.

CamaroKid300 · 11-25-2013, 10:37 PM

Quote:

Originally Posted by 4RD H8R

Unless something very unexpected happens I will be there. Will be interested to see what kind of numbers the car will do on a different dyno.

NEAL! It'll be awesome to see you again!

Do you have any more of those "no 5.0" stickers? I want some now that they won't be on a 6 cylinder

AG1LE · 11-26-2013, 09:45 AM

Before I start cold calling, can anyone recommend an area dealership with reasonable prices and high quality? I am looking for the best 3.91 gear installation/recalibration scenario that doesn't void my warranty. As I understand it, recalibration of the speedometer by anyone other than the dealership will be seen by GM as a non-GM tune, with warranty implications.

Thanks!

blake2010ss · 11-26-2013, 09:58 AM

With dealerships.... Book rate is book rate. Youre gonna have to open your wallet for any of them, my guess. Not to mention, probably have to purchase the part at list from them to warranty it as well.

OK2DRUL · 11-26-2013, 10:07 AM

Quote:

Before I start cold calling, can anyone recommend an area dealership with reasonable prices and high quality? I am looking for the best 3.91 gear installation/recalibration scenario that doesn't void my warranty. As I understand it, recalibration of the speedometer by anyone other than the dealership will be seen by GM as a non-GM tune, with warranty implications.

Thanks!

I don't think you're going to get a deal at any dealership. It's the only way to go if you're trying not to void the warranty though. I've had good experience with Jim Ellis on Peachtree Industrial, but that's just for normal service. They quoted me $1900 to replace the factory exhaust because it developed a rattle and I was out of my bumper to bumper warranty period. Never the less, I bought a new diffuser and mufflers from Southern Comfort from a NPP swap on his old 1LE and my buddy welded it in for free.

Southern Comfort · 11-26-2013, 10:26 AM

Quote:

Originally Posted by OK2DRUL

I don't think you're going to get a deal at any dealership. It's the only way to go if you're trying not to void the warranty though. I've had good experience with Jim Ellis on Peachtree Industrial, but that's just for normal service. They quoted me $1900 to replace the factory exhaust because it developed a rattle and I was out of my bumper to bumper warranty period. Never the less, I bought a new diffuser and mufflers from Southern Comfort from a NPP swap on his old 1LE and my buddy welded it in for free.

And I blew that $50 bucks on an oil change at the dealer...
Go figure.

OK2DRUL · 11-26-2013, 10:33 AM

Quote:

And I blew that $50 bucks on an oil change at the dealer...
Go figure.

Seems to be how it goes! Who all is running a catch can? Thinking about getting one, but have seen mixed reviews. Is it worth it?

CamaroKid300 · 11-26-2013, 10:36 AM

Quote:

Originally Posted by OK2DRUL

Seems to be how it goes! Who all is running a catch can? Thinking about getting one, but have seen mixed reviews. Is it worth it?

I have one...I say its worth it. Every oil change I drain about an inch deep (in a 16.9 oz kroger water bottle) of junk out of the can.

Can't hurt, doesn't cost a lot...so I say why not!

Brolik10 · 11-26-2013, 10:38 AM

We converted to winter gas about a month ago, some terminals may still be blending off summer gas.. And depending on where you gas up the ethanol blend varies..

Sent from my iPhone

11-25-2013, 09:05 PM	#15262
SlowSS Drives: 2013 Camaro 2SS/RS 1LE Join Date: Sep 2010 Location: Commerce, GA Posts: 3,873	Can't wait for Dyno day! I will most likely be on the dyno as well. So J.T., you going to go head and do the headers instead of the springs? __________________ My Build Thread!

11-25-2013, 10:05 PM	#15266
4RD H8R Beating 5.0's since 1988 Drives: 2010 RS SS M6 Join Date: Jun 2010 Location: Buford, Ga. Posts: 525	Unless something very unexpected happens I will be there. Will be interested to see what kind of numbers the car will do on a different dyno. __________________ Beating the crap out of my Camaros for 23+ years 1973, 1970 1/2, 1979, 1968, 1971, 2010

11-26-2013, 09:58 AM	#15269
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	With dealerships.... Book rate is book rate. Youre gonna have to open your wallet for any of them, my guess. Not to mention, probably have to purchase the part at list from them to warranty it as well. __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

11-26-2013, 10:38 AM	#15274
Brolik10 BLOWN!!! Drives: 2010 RJT 2SS Join Date: Apr 2010 Location: Gwinnett, GA Posts: 1,103 View My Garage	We converted to winter gas about a month ago, some terminals may still be blending off summer gas.. And depending on where you gas up the ethanol blend varies.. Sent from my iPhone __________________ Blown! Full Bolt-ons!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM

11-26-2013, 09:45 AM	#15268
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	Before I start cold calling, can anyone recommend an area dealership with reasonable prices and high quality? I am looking for the best 3.91 gear installation/recalibration scenario that doesn't void my warranty. As I understand it, recalibration of the speedometer by anyone other than the dealership will be seen by GM as a non-GM tune, with warranty implications. Thanks!