"To Do" list #2

[f_bodyman]

That a lot of modding! What brand is your catchcan and where did you buy it? Does it also have good access to the drain valve where its mounted? I dont like how the Moroso one installs. Does it install well with the CAI? Ive been looking into that Rotofab too... They advertise a ballpark 25hp increase, is it noticeable? Also, does the CAI install easily? Factory PCV hoses used? (Aka the one on the elbow with the canister built in) You said you needed to mod your plasma lights?? How? Who makes them? Ive heard of guys melting their lenses with different running lights. Is this a problem?

Sorry for the book of questions, but I like to be well informed before making changes to my baby! Haha.

PM me an answer if you like, or just post it if youd like to enlighten everyone else too!

Thanks!

[SamHouseIII]

Originally Posted by f_bodyman

That a lot of modding! What brand is your catchcan and where did you buy it? Does it also have good access to the drain valve where its mounted? I dont like how the Moroso one installs. Does it install well with the CAI? Ive been looking into that Rotofab too... They advertise a ballpark 25hp increase, is it noticeable? Also, does the CAI install easily? Factory PCV hoses used? (Aka the one on the elbow with the canister built in) You said you needed to mod your plasma lights?? How? Who makes them? Ive heard of guys melting their lenses with different running lights. Is this a problem?

Sorry for the book of questions, but I like to be well informed before making changes to my baby! Haha.

PM me an answer if you like, or just post it if youd like to enlighten everyone else too!

Thanks!

Elite Engineering Catch can and there is no pet**** to drain it, you must unscrew the can bottom to empty it. Good access to it though where I have it mounted.

CAI was no problem to install, they provide the best instructions. I can say for certain that you feel any increase in HP, but I can say throttle response and sound is off the charts.

Lights had to be modded because of the changes in bulb keys (groves to line them up with the connector), had to shave them down. I do believe if you contact AAC and let them know what year you have, this would be the best to ensure you get the right ones. No melting of any housing, in fact I knocked one loose (hit a bob cat) and knocked the light out of the cradle and was riding up against the outer light housing, no melting of any sorts.

[f_bodyman]

Thanks for the info! I like a lot of the stuff youve done... wish i could do some of the other mods, but i just have this issue with changing anything that i cant return perfectly to stock. No new holes in my baby. Haha

[snickerdoodle]

lets get some performance mods!

[SamHouseIII]

Originally Posted by snickerdoodle

lets get some performance mods!

I know....they will be on the next list....getting ready to deploy again.

[N8ten]

Dude your camaro is SICK! Im loving it but my pockets arnt that deep. good job!

[SamHouseIII]

Got my COVERKING seat covers in!!

[SamHouseIII]

To Do list #3

Fiberglass Splash Guards
Black emblem nameplate letters
Carbon Fiber Supercharged Aluminum Emblems (not sure if I will use these)
Hurst 3916030 Billet Plus
Hurst 3326030 Pit Pack Ext Duty Bushing
Hurst 5388665 Hard Drive Stick
Side Gills (redoing current ones/chipped)
APR Carbon fiber front bumper splitter
Pedders ZL1 Sway Bars
D3PE Camaro ZL1 High Capacity Water Reservoir
D3PE Camaro ZL1 Heat Exchanger

2012-2013 Camaro ZL1 JRE "Tune" Edition 75 RWHP Package
Includes: 10% Crank Pulley, ATI Balancer, APR crank bolt
Livewire SCT Tuner, Proper Size Belt for 10% Crank Pulley, Big Gulp Scoop and Washer Bottle, Livewire SCT tuner with custom Tune

[Antagonistic]

Can you be my daddy?

[SamHouseIII]

Hurst Short Throw installed!

[SamHouseIII]

10% overdrive lower pulley installed (ATI Super Damper)

[SamHouseIII]

Roto Fab Big Gulp Installed!

[SamHouseIII]

Roto-Fab Washer Relocation Kit

[SamHouseIII]

D3PE ZL1 High Capacity Reservoir