08-03-2015, 09:16 PM | #1 |
Drives: 2012 ls3 Join Date: Feb 2014
Location: humble
Posts: 113
|
KP Racing
Car is in for repair after 6 weeks of sitting in my driveway. Hopefully just having cam replaced. After 20k, maybe this set up will last longer.
|
08-12-2015, 04:13 PM | #2 |
Drives: 2014 Camaro 2SS Join Date: Jun 2014
Location: Sugar Land, TX
Posts: 24
|
What happned? Whats getting repaired? kp did the work intially? Or you are taking it to them to get fixed.
|
08-12-2015, 04:43 PM | #3 |
Account Suspended
Drives: 2002 Camaro All Motor LSX, 2010 SS Join Date: Jul 2015
Location: Houston
Posts: 35
|
No we didn't do the initial work but were gonna make this sucker faster than ever!!!! Can't wait to get it back to you Dino so you can rip thru those gears!
|
08-12-2015, 04:46 PM | #4 |
Account Suspended
Drives: 2002 Camaro All Motor LSX, 2010 SS Join Date: Jul 2015
Location: Houston
Posts: 35
|
The customer had the car towed to us about a week and a half ago and was built by someone else. We diagnosed it with a broken lifter and a bad lobe on the camshaft. Since we had to replace the lifters and camshaft anyway we figured why not go BIGGER! Big camshaft always make us smile
|
08-13-2015, 08:49 AM | #5 |
Drives: 2011 2SS/RS Join Date: Feb 2014
Location: H-Town
Posts: 1,037
|
hey OP can you shoot me a PM and let me know who did your original work? Or, I guess you could post it on here....might be fair warning to anyone looking around for shops...
|
08-15-2015, 01:16 PM | #6 |
Drives: 2015 2SS....white Join Date: May 2015
Location: Katy, TX
Posts: 527
|
hey "hazy" I sent you a PM..............
__________________
2015 Summit White 2SS/RS with NPP.... Roto-Fab intake....Phastek lowering springs....BMR strut brace....custom cut blower cam and tune by Matt Sorian.....@MSTuning...BTR valve train....stainless power longtubes with HF cats....Phastek supplied
|
08-17-2015, 08:16 AM | #7 |
Drives: Camaro SS Join Date: Jan 2013
Location: Katy, Texas
Posts: 156
|
Ill take that PM as well please.
|
08-18-2015, 10:12 AM | #8 |
Drives: 2015 2SS....white Join Date: May 2015
Location: Katy, TX
Posts: 527
|
The PM I sent hazy was just some personal contact info. I ran into him at Randall's and wanted to keep in touch ............nothing pertaining to this thread. sorry.
__________________
2015 Summit White 2SS/RS with NPP.... Roto-Fab intake....Phastek lowering springs....BMR strut brace....custom cut blower cam and tune by Matt Sorian.....@MSTuning...BTR valve train....stainless power longtubes with HF cats....Phastek supplied
|
08-19-2015, 02:52 PM | #9 |
CamaroFans.com
|
LOL all you guys need to know is KP Racing is the real deal around Houston. If you want to avoid suspect speed shops in this area just take your car to KP.
|
08-19-2015, 04:07 PM | #10 |
Account Suspended
Drives: 2002 Camaro All Motor LSX, 2010 SS Join Date: Jul 2015
Location: Houston
Posts: 35
|
Thanks Mike. We got Dino's car all done and its ready for him to pickup. I will let him give you guys the information on the new setup and the dyno sheet if he wants.
|
08-19-2015, 05:10 PM | #11 |
CamaroFans.com
|
Very nice..
|
11-06-2015, 12:43 AM | #12 |
Drives: 2012 ls3 Join Date: Feb 2014
Location: humble
Posts: 113
|
Sorry guys been wanting to get another dyno with dyno jet to compare with my old set up. But nevertheless I'm more than thrilled with KP's work and professional approach. I'm currently saving for KP to swap out rear gears. Once again if you need something done right this is where u go do not waste your time going anywhere else in Houston!!!
|
11-06-2015, 07:53 AM | #13 |
Account Suspended
Drives: 2002 Camaro All Motor LSX, 2010 SS Join Date: Jul 2015
Location: Houston
Posts: 35
|
Thank you for the props!!!! That means a ton to us!
Sent from my SM-N920V using Tapatalk |
|
|