05-07-2012, 09:45 AM | #1 | ||
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
ADM RACE INTAKE VERSUS STOCK DYNO AND STREET
Over the weekend we spent time with our new RACE INTAKE FOR THE ZL1 on the dyno and on the street,we have complete systems with calibrations ready to go.
Here are the results: BASE DYNO - ADM ZL1 RACE INTAKE DYNO - |
||
05-07-2012, 10:09 AM | #2 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Dyno data on ADM RACE INTAKE with MAF RESCALE ONLY
For comparison sakes we are posting the differences of both TEMP,HUMIDITY,A/F from stock dyno to ADM RACE INTAKE DYNO.
NO Timing changes were made. NO Limiter changes were made. NO Power enrichments adjustments were made. The only mod to the calibration was in the maf curve,this change was made so that the A/F would be as close to the same as stock...MAKING THIS A VERY SAFE AND RELIABLE PACKAGE. NOTE:ADM Performance will also have a race calibration designed for higher octane fuel that can potentially aid in more power and torque thus reducing traction even more . BASE DYNO- Dynojet Research Inc. Run Name: C:\DynoRuns\CHEVY\2012 CAMARO ZL1\RunFile_001.drf Run Title: Run Notes: Run Date: 5/5/2012 1:17:56 PM RunFile_001.drf: 82.96.09 °F 29.56 in-Hg Humidity: 19 % SAE: 1.00 Average Gear Ratio: 46.25 s RPM x1000 hp ft-lbs Air/Fuel 0.27 2.20 158.37 377.70 14.69 0.43 2.30 185.82 424.26 14.38 0.58 2.40 201.70 441.35 13.73 0.72 2.50 214.50 450.59 12.67 0.86 2.60 226.33 457.17 11.99 1.00 2.70 238.26 463.47 11.72 1.14 2.80 249.03 467.10 11.59 1.28 2.90 261.21 473.04 11.55 1.42 3.00 270.41 473.40 11.55 1.56 3.10 280.63 475.46 11.55 1.70 3.20 288.99 474.34 11.53 1.83 3.30 298.67 475.31 11.50 1.97 3.40 310.56 479.71 11.55 2.10 3.50 325.07 487.80 11.60 2.24 3.60 335.03 488.79 11.62 2.37 3.70 344.17 488.53 11.61 2.51 3.80 355.20 490.92 11.57 2.64 3.90 364.93 491.48 11.54 2.78 4.00 375.21 492.63 11.59 2.91 4.10 381.12 488.23 11.61 3.05 4.20 391.13 489.09 11.55 3.18 4.30 401.51 490.42 11.51 3.32 4.40 406.03 484.67 11.53 3.46 4.50 414.13 483.36 11.55 3.59 4.60 423.48 483.49 11.57 3.73 4.70 432.42 483.24 11.59 3.87 4.80 437.32 478.53 11.59 4.02 4.90 444.27 476.20 11.61 4.16 5.00 449.06 471.70 11.64 4.30 5.10 457.18 470.81 11.64 4.45 5.20 459.80 464.43 11.60 4.59 5.30 467.61 463.40 11.58 4.74 5.40 468.55 455.73 11.52 4.89 5.50 472.17 450.89 11.32 5.04 5.60 476.71 447.08 11.15 5.20 5.70 482.91 444.97 11.02 5.35 5.80 482.93 437.33 10.89 5.51 5.90 485.69 432.38 10.74 5.68 6.00 483.96 423.68 10.65 5.84 6.10 481.13 414.26 11.23 6.25 6.20 129.22 109.43 15.15 --------- --------- --------- --------- --------- MAX: 6.25 6.20 485.69 492.63 15.15 MIN: 0.27 2.20 129.22 109.43 10.65 FINAL DYNO - Dynojet Research Inc. Run Name: C:\DynoRuns\CHEVY\2012 CAMARO ZL1\ZL1 RACE INTAKE FINAL\RunFile_001.drf Run Title: Run Notes: Run Date: 5/6/2012 9:42:39 AM RunFile_001.drf: 81.46 °F 29.52 in-Hg Humidity: 23 % SAE: 1.00 Average Gear Ratio: 46.25 s RPM x1000 hp ft-lbs Air/Fuel 0.50 2.10 56.66 141.63 14.79 0.79 2.20 119.15 284.26 14.65 0.96 2.30 167.60 382.49 14.27 1.11 2.40 190.78 417.46 13.81 1.25 2.50 210.72 442.61 13.19 1.39 2.60 229.17 462.87 12.66 1.53 2.70 245.59 477.68 12.32 1.67 2.80 257.84 483.64 12.10 1.80 2.90 267.55 484.56 12.02 1.93 3.00 278.55 487.65 11.96 2.06 3.10 291.80 494.33 11.92 2.19 3.20 300.45 493.14 11.87 2.32 3.30 309.29 492.25 11.84 2.46 3.40 320.15 494.54 11.83 2.59 3.50 329.49 494.42 11.86 2.72 3.60 341.67 498.45 11.85 2.84 3.70 356.11 505.50 11.82 2.97 3.80 365.65 505.36 11.78 3.10 3.90 376.08 506.46 11.76 3.23 4.00 386.78 507.88 11.75 3.36 4.10 395.19 506.20 11.76 3.49 4.20 406.35 508.14 11.76 3.61 4.30 415.40 507.40 11.74 3.75 4.40 421.76 503.44 11.71 3.88 4.50 431.27 503.35 11.67 4.01 4.60 442.02 504.68 11.66 4.14 4.70 445.66 498.04 11.69 4.27 4.80 456.72 499.73 11.73 4.40 4.90 464.22 497.58 11.79 4.54 5.00 471.46 495.23 11.83 4.67 5.10 478.26 492.54 11.83 4.81 5.20 483.62 488.47 11.78 4.95 5.30 486.81 482.40 11.70 5.09 5.40 494.48 480.94 11.55 5.23 5.50 499.59 477.10 11.36 5.37 5.60 499.91 468.86 11.33 5.51 5.70 507.80 467.89 11.40 5.66 5.80 513.73 465.18 11.40 5.81 5.90 516.26 459.57 11.38 5.95 6.00 521.73 456.71 11.35 6.11 6.10 519.80 447.57 11.86 6.49 6.20 137.57 116.51 N/A --------- --------- --------- --------- --------- MAX: 6.49 6.20 521.73 508.14 14.79 MIN: 0.50 2.10 56.66 116.51 11.33 |
05-07-2012, 10:26 AM | #3 | |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
ADM ZL1 RACE INTAKE -IAT DATA VIDEO
ADM Performance not only does testing on the dyno but we also give real world data as well.Here is a short clip of our RACE INTAKE GIVING YOU TRUE COLD AIR .
In the video you can see that the AMBIENT AIR (OUTSIDE AIR) is 92 degrees and the INLET AIR TO THE ENGINE is 93 degrees at this point in the video,many times they were equal but the sampling rate between the ECM AND BCM are not the same....Yes GM does not sample data on all their sensors at the same rate EXCUSE THE SHACKY VIDEO - I PHONE |
|
05-07-2012, 12:17 PM | #4 |
Drives: 2012 ZL1 Join Date: Oct 2011
Location: ZL1
Posts: 98
|
How much? And when can I order?
|
05-07-2012, 02:21 PM | #5 |
Drives: Silver SS/RS, Man 6 Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
|
I have the ADM ZL1 race CAI on my car. Really updates the looks along with the performance.
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears |
05-07-2012, 02:26 PM | #6 |
|
Nice Gains Andy !!
|
05-07-2012, 04:06 PM | #7 |
Drives: 12' ZL1, AGM 6M Join Date: Jun 2009
Location: 49th state
Posts: 249
|
Nice gains Andy, your intake gives the ZL1 an added touch of class under the hood too!
|
05-07-2012, 05:16 PM | #8 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
05-07-2012, 06:49 PM | #9 |
Very nice!!! You keep making the decision to move all my goodies in my 2010 to a new ZL1 easier and easier all the time. GREAT Info...
__________________
|
|
05-08-2012, 02:45 AM | #10 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,934
|
Great numbers and an awesome looking intake! Driving impressions?
How much more is safely left in a 93 octane tune optimizing fuel, timing, etc? |
05-08-2012, 09:08 PM | #11 | |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Quote:
Maybe 5-6 rwhp. Factory tune is very impressive,Cat protection is left on as you can see in the dynograph. The Intake is definantly a worthwhile mod,I am sure we will all be battling for first place,But we have alot more in store than just an intake for these cars |
|
05-08-2012, 09:43 PM | #12 |
502 RWHP N/A
|
Once again adm does it
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
05-08-2012, 09:56 PM | #13 |
Drives: ZL1, Genesis, Grand Cherokee Join Date: Feb 2012
Location: Cleveland
Posts: 232
|
Holy crap....you got 35rwhp and 15lb/ft torque more??? That is impressive!
Would this be an out of the box install or it needs a tuning? If yes, where can one do it if we buy the CAI? Also, will you have a "street CAI" and do you have any results with it yet? Thank Andy |
05-09-2012, 10:49 AM | #14 |
Okie doke
|
Very nice gains!!
Crowley
__________________
|
|
|
Thread Tools | |
|
|