10-29-2013, 06:22 PM | #15 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
With all the harden parts and build on trans mine is there with the level 5 spent $2300.00. Like MANNY had some one build here local. They build for a lot of drag racer and mud bogging truck. I thank it was SLP in south fl that made my drive shaft ???
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-29-2013, 06:48 PM | #16 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
don,t know year of case, but mr nasty is correct, had to box for the plug...few others i had talk to did not have to box, just some massaging the hump..maybe i have a late model and the early models fit better..i think it might just be a shot in the dark...it will fit, just some take a little more work then others...but i would def make sure not to half ass this part as it is part of the frame and hitting these cars up with this much torque and hp, i,m surprised some have not started tweaking the body...just a matter of time...maybe the independent suspension helps take some pressure off..??
__________________
|
10-29-2013, 08:12 PM | #17 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
mikepage0007
What rear gear are you running? I put the 3.91 in a month ago seems to be a good combo.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-29-2013, 08:27 PM | #18 | |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
Quote:
Also my case will be 98 or newer |
|
10-29-2013, 09:26 PM | #19 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
Whipple forged bottom end blower cam LT. last time it was dyno 585RWHP no power added after that. Been working on suspension and weight . Most of it was seat and wheel a lot of small front sway bar mats washer bottle any thing not needed some of the suspension mod will help. This summer going for head injector and fuel system. Still running stock head and fuel pump with a boost a pump and 60lb injector its all max out with what am running now not to bad. Also hoping to have weight down to 3500lb.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-29-2013, 09:33 PM | #20 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
Oh on the year case you want the 96 and older it has to with the bolt pattern on you block. Cant remember something to do with the 11oclock bolt hole check it out.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-30-2013, 06:18 AM | #21 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
Thanks nasty. I've looked into shaving weight but I don't want to strip the car like others have done. When I'm done with the swap I'll try to get it weighed and then re weight it after I remove seats and a couple other things for race days.
Also RPM told me they use 01 or newer cases when I spoke to them. I think they mentioned that they use those since they're the right bolt pattern unlike the 96 and older that are missing the top bolt. |
10-30-2013, 07:26 AM | #22 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
i believe i put in the 355 with the gforce 9inch..been awhile and memories fade..lol..running a m6 at the time and did not want any more tq then needed at the time..
__________________
|
10-30-2013, 08:33 AM | #23 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
Memories Fade I know what you mean their. LOL
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-30-2013, 08:47 AM | #24 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
DarkCry956
What set up are you running?? Did you cook the A6?? My stock trans make about 40 passes and 2,000 highway miles. But I also beat the shit out of it not a DD car.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-30-2013, 09:18 AM | #25 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
I got a Cam and YSi on a stock bottom end. Pushed over 700 RWHP and close to 600 TR. It was dyno a few months back so I don't remember exact numbers. I probably have over 150 total passes and 35500 miles. LOTS of low 12 and high 11 sec runs and plenty of high 10 and low 11 sec passes with shifting issues. Could be a bad converter or bad trans, either way that's in the past.
|
10-30-2013, 11:27 AM | #26 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
Are you still running the 3.27 gear? If so after the 4L80 swap may want to drop to the 3.91 4L has a tall first gear. Need some help getting it off the line.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
10-30-2013, 11:51 AM | #27 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
Yes I got a stock rear end. I'm debating now on what to do as far as a rear goes. Since I need a drive shaft so I might as well just get a built rearend and ask my tuner or whoever is more knowledgable than me about what gears to run.
|
10-30-2013, 12:13 PM | #28 |
Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010
Location: South Florida
Posts: 1,237
|
The more power you make the less gear you will need especially with your YSI making 700 rwhp.
__________________
LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi |
|
|
|
|