2014 Camaro 2SS 1LE w/ 19k miles

[DavidtheM]

For sale is my 2014 Chevrolet Camaro 2SS 1LE with 19,XXX miles. I built the car as a canyon carver/track weapon. It has been METICULOUSLY cared for, detailed, and garaged since I’ve owned it. I have tracked the car twice; once at Laguna Seca and once at Willow Springs (Big Willow). I serviced it after each track day and have invoices to prove it. The car handles amazingly, has incredible amounts of grip, has incredible steering feel, and can be driven on the street with no issues. I understand it will take a particular person to show interest in this car. If you’re looking for a comfy cruiser, this isn’t it. It sits very low and needs to be angled into driveways and over speed bumps. It makes a reliable 429 WHP (approximately 500 HP at the crank) with JUST EXHAUST AND INTAKE MODS. 1LEs are already extremely capable from the factory, but I went a step further to tighten things up and make it turn and stop faster. I’m in no rush to sell. It was a pain in the ass to build this thing with parts delays, etc. Some of the parts I sourced for this car are no longer made. This car needs nothing and I can confidently say you will not find a nicer track focused/canyon carving Camaro anywhere.

Price is $32,000.


SUSPENSION/CHASSIS:

-Bilstein B6 inverted monotube struts/dampers on all 4 corners
-Detroit Speed 1.5” lowering springs
-JPSS 32mm rear sway bar
-Pegasus Aluminum subframe bushings
-OEM Z28 rear upper control arm bushings
-Detroit Speed adjustable polyurethane motor mounts
-JPSS Billet Radius Rod bushing inserts
-Hendrix Engineering rear differential offset delrin bushing

ENGINE/EXHAUST:

-Kooks Signature Series stepped headers (1 3/4 “ to 1 7/8 “) ceramic coated in Sterling Silver
-Kooks high-flow catted midpipes
-GM Performance Parts OEM Z28 cold air intake
-Gwatney Performance intake manifold mod (radius rods installed along the plenum of the intake manifold)
-Elite Engineering Oil Catch Can
-Dyno tuned at Accelerated Racing Solutions: 429 WHP, 420 TQ

BRAKES:

-Gen 2 OEM Cadillac CTS-V 6-piston Brembo front calipers w/ Akebono pads
-OEM GM Performance ZL1 14.5” 2-piece rotors up front
-Goodridge Stainless Steel lines on all 4 brakes w/ Castrol SRF fluid

WHEELS/TIRES:

-Apex Racing 19x10.5” ARC-8 wheels at all four corners. Apex Racing 20mm spacer up front with ARP extended wheel studs
-Kumho Ecsta PS91 305x30x19 tires on all 4 corners

MISCELLANEOUS:

-MGW Short Shifter w/ Speed Dawg 8-Ball Hurst knob
-ZL1 Add Ons rear wicker bill and front splitter
-ZL1 Add Ons billet aluminum lift pads
-OEM ZL1 rocker panels
-OEM Recaro seats


Sent from my iPhone using Tapatalk

[DavidtheM]

Sent from my iPhone using Tapatalk

[DavidtheM]

Sent from my iPhone using Tapatalk

[SS Performance]

Nice looking car.

Good luck.
Craig

[DavidtheM]

Bump


Sent from my iPhone using Tapatalk

[SS Performance]

Really no action on this?

It's a beautiful car with great mods for a good price.

I would be in but I already have one.

If it doesn't move on here try Bring A Trailer they seem to be bringing a good price there.

Good luck
Craig

[The SS Godfather]

Wow, real beauty good price !! good luck !!

[DavidtheM]

Thanks! Yeah I thought of bring a trailer or cars and bids


Sent from my iPhone using Tapatalk

[Level954]

Gorgeous!

[SS Performance]

Bring a Trailer seems to bring better money. I would suggest painting the front calipers to match the rear, just a suggestion.

[DavidtheM]

Bump

[DavidtheM]

Bump


Sent from my iPhone using Tapatalk

[DavidtheM]

SOLD


Sent from my iPhone using Tapatalk