09-10-2011, 07:07 PM | #1 |
LT4 M6
Drives: 2018 ZL1 1LE Join Date: Nov 2010
Location: Bloomington, IN
Posts: 1,249
|
Under Drive pulley and forced induction.
If i choose to go forced induction later will the under drive pulley need to come off for the blower? I am on the fence if I want to get a pulley when I do my cam swap.
|
09-10-2011, 07:57 PM | #2 |
Drives: 2010 camaro 2SS LS3 Join Date: Aug 2011
Location: Denver
Posts: 1,334
|
Its only 4 horsepower at the best, is it worth it? My ac is too important, so is cooling and battery. And not overheating my power steering.
|
09-10-2011, 08:00 PM | #3 |
Drives: 2011 imperial blue SS, black 92 RS Join Date: Apr 2011
Location: Denham Springs
Posts: 2,580
|
Yes it will need to come off. You'll spin the supercharger slot slower with the ud pulley. Unless you put a smaller top pulley too. But the smaller the top pulley is, more likely for the belt to slip.
__________________
2011 imperial blue SS/RS a6 12.43@112 vararam, tune, jba cats, magnaflow axle back, self ported tb, under drive pulley, NO headers, Stock tires. 1.87 60ft. Stock tires. SOLD :(
2000 1500 silverado extra cab SOLD :( 2017 Silverado 5.3 all stock 2004 5.7 GTO 78mm turbo |
09-10-2011, 08:10 PM | #4 |
LT4 M6
Drives: 2018 ZL1 1LE Join Date: Nov 2010
Location: Bloomington, IN
Posts: 1,249
|
I have also read where the under drive pulley is hard on timing chains but do not know if that is true or not.
|
09-11-2011, 04:53 PM | #5 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
If you are going to go with a blower down the road a underdrive pulley is a waste of time. You can't run them with a blower so you would have to remove it for the supercharger install. Save your cash for the blower, what system are you thinking about?
|
09-12-2011, 06:17 AM | #6 |
LT4 M6
Drives: 2018 ZL1 1LE Join Date: Nov 2010
Location: Bloomington, IN
Posts: 1,249
|
|
09-12-2011, 06:37 AM | #7 |
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
FWIW, during my cam swap, I had Mike install one (best time to do it). I do mostly in-town driving with my car and I’ve not seen any ill effects.
Oh by the way, I made sure the pulley was 304L stainless.....
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd Last edited by McBeevee; 09-12-2011 at 06:53 AM. |
09-12-2011, 08:57 AM | #8 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
Typically with a blower a customer will buy a overdrive pulley. That way you can overdrive the blower without shrinking the blower pulley & causing potential belt slip.
We usually have 10% overdrive pulleys for boost guys wanting more boost in stock. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What do all the abbreviations mean? | CrzyGamr2 | 5th Gen Camaro SS LS LT General Discussions | 77 | 12-07-2012 04:34 AM |
Acronyms at C5 | hokie2012 | 5th Gen Camaro SS LS LT General Discussions | 34 | 08-10-2011 03:56 PM |
Acronyms? | KEEP RT | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 20 | 03-11-2011 08:57 PM |
Forced Induction @ Livernois | Mod4SS | Forced Induction - V8 | 98 | 12-13-2009 07:07 PM |
Do you think 500 RWHP is acheivable without forced induction? | Pope Designs | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 40 | 12-07-2009 09:11 AM |