12-07-2012, 01:44 PM | #71 |
COTW 5/27/13
|
PICS!!!!!!!!!!!!!!!!!!!!!
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-07-2012, 02:00 PM | #72 |
COTW 5/27/13
|
So while I was swapping my throttle bodies i figured i would snap some pics of my Intake manifold guts. Now I put a Elite CC on at about 500 miles, plumbed my driver side evac and did a breather valve at 6000 miles and am currently at 17000 miles. here is what the fruits of my labor have done to my intake manifold
seems to have been well worth my time. I figured more had slipped by then what I saw in my Catch can but I guess not!
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-08-2012, 06:34 PM | #73 |
COTW 5/27/13
|
Well bought some headers today! got a killer deal on some TSP 1 7/8 with catts from diamonmike. Can not wait to get these bad boys installed
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-09-2012, 08:36 PM | #74 | |||
COTW 5/27/13
|
well headers are in!!!! enjoy
here a side by side of Stock vs TSP here is what I sounded like with stock headers on here is post install (was too loud for camera and sound cuts out!) and here a lil' clip of the idle
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
|||
12-26-2012, 03:17 PM | #75 |
COTW 5/27/13
|
well my lovely wife got me a leather e-brake boot and the fuel line relocation kit for Christmas! will post pics when I get em installed
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-28-2012, 08:43 PM | #76 |
COTW 5/27/13
|
here is pics of the e-brake boot
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-28-2012, 08:44 PM | #77 |
COTW 5/27/13
|
and heres the pics of the fuel line relocation ( I removed the intake cover while I was in there)
before after
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
12-28-2012, 08:47 PM | #78 |
COTW 5/27/13
|
here is my 2012 year end wrap-up
Complete the Cosmetic Modding : YEAR 2012 Jan no pics had to pay off christmas bills:( Feb - video JDP color change HALOS with grille lighting Mar no pics LTZ front bumper(ordered) MPD1 Z-force hood (ordered) and a new driver rear strut (DAMN Wal-mart parking lot potholes)(SLP hooked me up on this one)FIXED Apr no pics RX Breather valve rerouted some hose to clean up the engine bay a little May- pics Door ABL panels and new dash trim MPD-1 Z-Force hood Rear bowtie black chrome/ CGM Jun no pics Me and Wife 5yr anniversary = no mods for car July - coming soon GEN5DIY Dash ABL lighting (still in work) Aug - no pics LTZ front bumper (shipped) AAC concept Mirrors (deposit placed) Sept LTZ Front Bumper - here ZL1 Rockers Heater Hose Relocation kit (to be installed soon) Oct CGM intake elbow Legends of the road car show-pics LTZ bumper DESTROYED -carnage Nov ZL-1 Bumper--------\____here Dual Vented Fenders/ Heater Hose Relocation - pics Dec VMAX ported Throttle body- pics TSP 1 7/8 headers w/ HF catts- pic / vids Leather E-brake boot pics Fuel Line relocation kit pics
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
01-09-2013, 03:38 PM | #79 |
Drives: 2010 IBM Camaro 1LT RS Join Date: Sep 2010
Location: Lake in the Hills, Illinois
Posts: 418
|
Sick ride! That is almost the exact same exterior setup i want on my car. In addition to an anvil spoiler and havoc diffuser. Keep up the good work! now i have a bench mark for my car.
|
01-09-2013, 03:54 PM | #80 | |
Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009
Location: Massachusetts
Posts: 3,100
|
Quote:
|
|
01-10-2013, 04:23 AM | #81 |
COTW 5/27/13
|
Thanks guys means a lot! I actually plan on doing the havoc diffuser w/ zl1 rear mud flaps this year. After I pay off my AAC concept mirrors.
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
02-03-2013, 04:03 PM | #82 |
COTW 5/27/13
|
So I threw an A/C belt for the 3rd time now the other day. I brought it in to the dealership to get it fixed again and this time they tell me it was all the modifications I have done to the engine that caused the A/C belt to hop off the pully. The changed it but informed me that they will not do anymore belts under warrenty for me.
Now my issue with this is that I have thrown this belt 2 others time, first was with ZERO modfications and the second I had a CC and CAI. Now that I have headers, that is what is causing my A/C belt to slip? I'm smelling a little fowl play here but if I thrown this belt again I will be having a nice chat with the local Service rep. This almost makes me want to give in and just void the whole thing and get a CAM and TUNE done on it.............. still thinking about what im gona do! Also finally paid off my AAC concept mirros last week so they should be here soon!
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
03-02-2013, 12:59 AM | #83 |
COTW 5/27/13
|
Ordered some Afterburners from Ivan at southwestspeed, hell of a vendor! Also ordered some ZL1 rear splash guards. hope to have these and my concept mirrors in soon
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
03-11-2013, 05:50 PM | #84 |
COTW 5/27/13
|
here some pics of the afterburners!
Before The Work The finished project
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OK...I'm starting a better V6 exhaust examples thread!! | KMPrenger | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 611 | 07-01-2020 08:49 AM |
[COTW 2/26/11]: MOHAWKs 677 HP 658 LB FT TQ IOSS Build Thread!! | MohawksIOSS | Member Car Journals | 75 | 04-30-2012 08:41 PM |
Neogenix's 2011 SS/RS BLK/BLK Build Thread | neogenix | Member Car Journals | 7 | 02-27-2011 10:15 PM |
PWA "The Lounge" | DGthe3 | Off-topic Discussions | 143773 | 11-06-2010 11:00 AM |