Seat removal helpppp - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AGENT-006 · 02-14-2012, 12:59 AM

I should be getting my new seat covers from IGGEE in a day or so and have heard its better to take the seats out to install the seat covers. So how do you remove the seats????

=Stephens= · 02-14-2012, 01:00 AM

Start by disconnecting the power, then remove the bolts holding it to the floorboard.

kcox2010 · 02-16-2012, 10:41 PM

just lift up on the rear seat and it pops up and u can remove tthe lower seat and then remove the bolts hold up the back upper seat and that it

Rcfiddy1 · 02-16-2012, 11:04 PM

Move electric seats as far forward, disconnect battery, remove the 2 bolts at back of seat track with torx50(if I remember correctly), Then lift head rest off by pushing in the tabs at base of headrest arms, tilt seat forward and use a flathead screwdriver and slide the locking clip on the electrical connection. Lift seat out of forked slots and your done. Can be done in 5 mins.

02-14-2012, 12:59 AM	#1
AGENT-006 AKA 'Mr. 006' Drives: 2010 CGM Camaro Join Date: Aug 2010 Location: Fresno Posts: 723 View My Garage	Seat removal helpppp I should be getting my new seat covers from IGGEE in a day or so and have heard its better to take the seats out to install the seat covers. So how do you remove the seats???? __________________

02-16-2012, 10:41 PM	#3
kcox2010 synergy2011 Drives: 2011 synergy green 1ss/rs Join Date: Mar 2009 Location: wheatfield NY Posts: 2,278	just lift up on the rear seat and it pops up and u can remove tthe lower seat and then remove the bolts hold up the back upper seat and that it __________________ 2011 synergy green ss/rs,rally stripes

02-16-2012, 11:04 PM	#4
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Move electric seats as far forward, disconnect battery, remove the 2 bolts at back of seat track with torx50(if I remember correctly), Then lift head rest off by pushing in the tabs at base of headrest arms, tilt seat forward and use a flathead screwdriver and slide the locking clip on the electrical connection. Lift seat out of forked slots and your done. Can be done in 5 mins. __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory leather seat cover problem	Char1ieone	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	07-05-2022 12:04 AM
Driver's Seat Mod for TALL PEOPLE	Camaro21	5th Gen Camaro SS LS LT General Discussions	47	07-24-2014 04:18 PM
Rear seat removal	alfie43	5th Gen Camaro SS LS LT General Discussions	11	03-28-2011 12:51 PM
Tires loosing pressure	joepitt	Wheels and Tires Talk Sponsored by The Tire Rack	22	12-11-2010 05:00 PM
Exposed foam of seat under the drivers seat / possible seat cover to short/tight	2010 Bumblebee	5th Gen Camaro SS LS LT General Discussions	5	08-28-2010 05:12 PM

02-14-2012, 01:00 AM	#2
=Stephens= Drives: 2011 LS Join Date: Feb 2011 Location: Kearney, Nebraska Posts: 3,541 View My Garage	Start by disconnecting the power, then remove the bolts holding it to the floorboard.