03-06-2015, 12:38 PM | #1 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Forgestar question
Will F14 Deep concaves fit? front = 10.5s and rear 12 x 20's fit on stock suspension? It would require removing the rear roller skate, but what does that roller skate actually do? I'm going to put stock goodyears up front and continue to run 305 MT Drs on the rear.
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance Last edited by jfayardiii; 03-06-2015 at 01:07 PM. |
03-07-2015, 05:17 PM | #2 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Anybody?
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
03-07-2015, 06:21 PM | #3 |
Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009
Location: Kansas
Posts: 2,559
|
No idea on the 12s out back. Tony (Nineball) or any of the wheel sponsors can get you fitment questions zeroed in.
If I remember correctly the roller skates were originally designed to quite the brakes down. Nothing is hurt if you cut them off or swap to a different pad. I had them then ditched the stock pad and went with a Hawk pad.
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=152335
Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR |
03-07-2015, 07:09 PM | #4 |
Treasure Coast Camaro 5
|
Yeah if u got skates get some hawks. Why not goto a 18?
__________________
|
03-08-2015, 04:06 PM | #5 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Rear brakes don't have roller skates only the front and would not need to be removed with 20" wheels. Not sure a 305 would fit on a 12" wheel, would normally use that size tire on an 11" wheel. Why such a wide rim if you don't want to use a wider tire in the rear?
|
03-09-2015, 07:34 AM | #6 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
The reason i was leaning towards the 20s out back as well as the 305s is that I'm already running 305 MTs. 11's would work, so im good with that.
I'm afraid of how the 18s will look with 20's up front. The only wheels that I've seen that look decent IMO are CCW and Welds and im just not willing to spend that kinda money.
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
|
|
|
|